[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200622031005.1890039-2-joel@jms.id.au>
Date: Mon, 22 Jun 2020 12:40:04 +0930
From: Joel Stanley <joel@....id.au>
To: devicetree-compiler@...r.kernel.org,
David Gibson <david@...son.dropbear.id.au>
Cc: linux-kernel@...r.kernel.org,
Stephen Rothwell <sfr@...b.auug.org.au>,
Arnd Bergmann <arnd@...db.de>
Subject: [PATCH v4 1/2] checks: Remove warning for I2C_OWN_SLAVE_ADDRESS
dtc does a sanity check on reg properties that they are within the 10
bit address range for i2c slave addresses. In the case of multi-master
buses or devices that act as a slave, the binding may describe an
address that the bus will listen on as a device. Do not warn when this
flag is set.
See Documentation/devicetree/bindings/i2c/i2c.txt.
This fixes the following build warnings reported by Stephen and by Arnd:
arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:126.11-130.4:
Warning (i2c_bus_reg): /ahb/apb/bus@...8a000/i2c-bus@...ipmb1@10:
I2C bus unit address format error, expected "40000010"
arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:128.3-30:
Warning (i2c_bus_reg): /ahb/apb/bus@...8a000/i2c-bus@...ipmb1@10:reg:
I2C address must be less than 10-bits, got "0x40000010"
Reported-by: Stephen Rothwell <sfr@...b.auug.org.au>
Reported-by: Arnd Bergmann <arnd@...db.de>
Signed-off-by: Joel Stanley <joel@....id.au>
---
v2: Fix typo
v4: Add U to define
---
checks.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/checks.c b/checks.c
index a8213c0e13a8..69b0156c940c 100644
--- a/checks.c
+++ b/checks.c
@@ -1022,6 +1022,8 @@ static void check_i2c_bus_bridge(struct check *c, struct dt_info *dti, struct no
}
WARNING(i2c_bus_bridge, check_i2c_bus_bridge, NULL, &addr_size_cells);
+#define I2C_OWN_SLAVE_ADDRESS (1U << 30)
+
static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node *node)
{
struct property *prop;
@@ -1044,6 +1046,8 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
}
reg = fdt32_to_cpu(*cells);
+ /* Ignore I2C_OWN_SLAVE_ADDRESS */
+ reg &= ~I2C_OWN_SLAVE_ADDRESS;
snprintf(unit_addr, sizeof(unit_addr), "%x", reg);
if (!streq(unitname, unit_addr))
FAIL(c, dti, node, "I2C bus unit address format error, expected \"%s\"",
@@ -1051,6 +1055,8 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
for (len = prop->val.len; len > 0; len -= 4) {
reg = fdt32_to_cpu(*(cells++));
+ /* Ignore I2C_OWN_SLAVE_ADDRESS */
+ reg &= ~I2C_OWN_SLAVE_ADDRESS;
if (reg > 0x3ff)
FAIL_PROP(c, dti, node, prop, "I2C address must be less than 10-bits, got \"0x%x\"",
reg);
--
2.27.0
Powered by blists - more mailing lists