linux-kernel - [PATCH 5.7 221/477] drivers: phy: sr-usb: do not use internal fsm for USB2 phy init

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200623195418.030120423@linuxfoundation.org>
Date:   Tue, 23 Jun 2020 21:53:38 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Bharat Gooty <bharat.gooty@...adcom.com>,
        Rayagonda Kokatanur <rayagonda.kokatanur@...adcom.com>,
        Kishon Vijay Abraham I <kishon@...com>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.7 221/477] drivers: phy: sr-usb: do not use internal fsm for USB2 phy init

From: Bharat Gooty <bharat.gooty@...adcom.com>

[ Upstream commit 6f0577d1411337a0d97d545abe4a784e9e611516 ]

During different reboot cycles, USB PHY PLL may not always lock
during initialization and therefore can cause USB to be not usable.

Hence do not use internal FSM programming sequence for the USB
PHY initialization.

Fixes: 4dcddbb38b64 ("phy: sr-usb: Add Stingray USB PHY driver")
Signed-off-by: Bharat Gooty <bharat.gooty@...adcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@...adcom.com>
Link: https://lore.kernel.org/r/20200513173947.10919-1-rayagonda.kokatanur@broadcom.com
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/phy/broadcom/phy-bcm-sr-usb.c | 55 +--------------------------
 1 file changed, 2 insertions(+), 53 deletions(-)

diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c
index fe6c58910e4cb..7c7862b4f41f0 100644
--- a/drivers/phy/broadcom/phy-bcm-sr-usb.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c
@@ -16,8 +16,6 @@ enum bcm_usb_phy_version {
 };
 
 enum bcm_usb_phy_reg {
-	PLL_NDIV_FRAC,
-	PLL_NDIV_INT,
 	PLL_CTRL,
 	PHY_CTRL,
 	PHY_PLL_CTRL,
@@ -31,18 +29,11 @@ static const u8 bcm_usb_combo_phy_ss[] = {
 };
 
 static const u8 bcm_usb_combo_phy_hs[] = {
-	[PLL_NDIV_FRAC]	= 0x04,
-	[PLL_NDIV_INT]	= 0x08,
 	[PLL_CTRL]	= 0x0c,
 	[PHY_CTRL]	= 0x10,
 };
 
-#define HSPLL_NDIV_INT_VAL	0x13
-#define HSPLL_NDIV_FRAC_VAL	0x1005
-
 static const u8 bcm_usb_hs_phy[] = {
-	[PLL_NDIV_FRAC]	= 0x0,
-	[PLL_NDIV_INT]	= 0x4,
 	[PLL_CTRL]	= 0x8,
 	[PHY_CTRL]	= 0xc,
 };
@@ -52,7 +43,6 @@ enum pll_ctrl_bits {
 	SSPLL_SUSPEND_EN,
 	PLL_SEQ_START,
 	PLL_LOCK,
-	PLL_PDIV,
 };
 
 static const u8 u3pll_ctrl[] = {
@@ -66,29 +56,17 @@ static const u8 u3pll_ctrl[] = {
 #define HSPLL_PDIV_VAL		0x1
 
 static const u8 u2pll_ctrl[] = {
-	[PLL_PDIV]	= 1,
 	[PLL_RESETB]	= 5,
 	[PLL_LOCK]	= 6,
 };
 
 enum bcm_usb_phy_ctrl_bits {
 	CORERDY,
-	AFE_LDO_PWRDWNB,
-	AFE_PLL_PWRDWNB,
-	AFE_BG_PWRDWNB,
-	PHY_ISO,
 	PHY_RESETB,
 	PHY_PCTL,
 };
 
 #define PHY_PCTL_MASK	0xffff
-/*
- * 0x0806 of PCTL_VAL has below bits set
- * BIT-8 : refclk divider 1
- * BIT-3:2: device mode; mode is not effect
- * BIT-1: soft reset active low
- */
-#define HSPHY_PCTL_VAL	0x0806
 #define SSPHY_PCTL_VAL	0x0006
 
 static const u8 u3phy_ctrl[] = {
@@ -98,10 +76,6 @@ static const u8 u3phy_ctrl[] = {
 
 static const u8 u2phy_ctrl[] = {
 	[CORERDY]		= 0,
-	[AFE_LDO_PWRDWNB]	= 1,
-	[AFE_PLL_PWRDWNB]	= 2,
-	[AFE_BG_PWRDWNB]	= 3,
-	[PHY_ISO]		= 4,
 	[PHY_RESETB]		= 5,
 	[PHY_PCTL]		= 6,
 };
@@ -186,38 +160,13 @@ static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg)
 	int ret = 0;
 	void __iomem *regs = phy_cfg->regs;
 	const u8 *offset;
-	u32 rd_data;
 
 	offset = phy_cfg->offset;
 
-	writel(HSPLL_NDIV_INT_VAL, regs + offset[PLL_NDIV_INT]);
-	writel(HSPLL_NDIV_FRAC_VAL, regs + offset[PLL_NDIV_FRAC]);
-
-	rd_data = readl(regs + offset[PLL_CTRL]);
-	rd_data &= ~(HSPLL_PDIV_MASK << u2pll_ctrl[PLL_PDIV]);
-	rd_data |= (HSPLL_PDIV_VAL << u2pll_ctrl[PLL_PDIV]);
-	writel(rd_data, regs + offset[PLL_CTRL]);
-
-	/* Set Core Ready high */
-	bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
-			      BIT(u2phy_ctrl[CORERDY]));
-
-	/* Maximum timeout for Core Ready done */
-	msleep(30);
-
+	bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL],
+			      BIT(u2pll_ctrl[PLL_RESETB]));
 	bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
 			      BIT(u2pll_ctrl[PLL_RESETB]));
-	bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
-			      BIT(u2phy_ctrl[PHY_RESETB]));
-
-
-	rd_data = readl(regs + offset[PHY_CTRL]);
-	rd_data &= ~(PHY_PCTL_MASK << u2phy_ctrl[PHY_PCTL]);
-	rd_data |= (HSPHY_PCTL_VAL << u2phy_ctrl[PHY_PCTL]);
-	writel(rd_data, regs + offset[PHY_CTRL]);
-
-	/* Maximum timeout for PLL reset done */
-	msleep(30);
 
 	ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL],
 				     BIT(u2pll_ctrl[PLL_LOCK]));
-- 
2.25.1