| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 23 Jun 2020 09:57:41 +0300
From: Mike Rapoport <rppt@...nel.org>
To: linux-kernel@...r.kernel.org
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Arnd Bergmann <arnd@...db.de>,
Guenter Roeck <linux@...ck-us.net>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Mike Rapoport <rppt@...nel.org>,
Mike Rapoport <rppt@...ux.ibm.com>
Subject: [PATCH 5/8] pwm: remove pwm-puv3 driver
From: Mike Rapoport <rppt@...ux.ibm.com>
The unicore32 port is removed from the kernel.
There is no point to keep stale PWM driver for this architecture.
Signed-off-by: Mike Rapoport <rppt@...ux.ibm.com>
---
drivers/pwm/Kconfig | 9 ---
drivers/pwm/Makefile | 1 -
drivers/pwm/pwm-puv3.c | 150 -----------------------------------------
3 files changed, 160 deletions(-)
delete mode 100644 drivers/pwm/pwm-puv3.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index cb8d739067d2..7dbcf6973d33 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -370,15 +370,6 @@ config PWM_PCA9685
To compile this driver as a module, choose M here: the module
will be called pwm-pca9685.
-config PWM_PUV3
- tristate "PKUnity NetBook-0916 PWM support"
- depends on ARCH_PUV3
- help
- Generic PWM framework driver for PKUnity NetBook-0916.
-
- To compile this driver as a module, choose M here: the module
- will be called pwm-puv3.
-
config PWM_PXA
tristate "PXA PWM support"
depends on ARCH_PXA || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index a59c710e98c7..2c2ba0a03557 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
-obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
obj-$(CONFIG_PWM_RCAR) += pwm-rcar.o
obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o
diff --git a/drivers/pwm/pwm-puv3.c b/drivers/pwm/pwm-puv3.c
deleted file mode 100644
index 9d0bd87a425e..000000000000
--- a/drivers/pwm/pwm-puv3.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/pwm.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <asm/div64.h>
-#include <mach/hardware.h>
-
-struct puv3_pwm_chip {
- struct pwm_chip chip;
- void __iomem *base;
- struct clk *clk;
-};
-
-static inline struct puv3_pwm_chip *to_puv3(struct pwm_chip *chip)
-{
- return container_of(chip, struct puv3_pwm_chip, chip);
-}
-
-/*
- * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
- * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
- */
-static int puv3_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
-{
- unsigned long period_cycles, prescale, pv, dc;
- struct puv3_pwm_chip *puv3 = to_puv3(chip);
- unsigned long long c;
-
- c = clk_get_rate(puv3->clk);
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
-
- if (period_cycles < 1)
- period_cycles = 1;
-
- prescale = (period_cycles - 1) / 1024;
- pv = period_cycles / (prescale + 1) - 1;
-
- if (prescale > 63)
- return -EINVAL;
-
- if (duty_ns == period_ns)
- dc = OST_PWMDCCR_FDCYCLE;
- else
- dc = (pv + 1) * duty_ns / period_ns;
-
- /*
- * NOTE: the clock to PWM has to be enabled first
- * before writing to the registers
- */
- clk_prepare_enable(puv3->clk);
-
- writel(prescale, puv3->base + OST_PWM_PWCR);
- writel(pv - dc, puv3->base + OST_PWM_DCCR);
- writel(pv, puv3->base + OST_PWM_PCR);
-
- clk_disable_unprepare(puv3->clk);
-
- return 0;
-}
-
-static int puv3_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct puv3_pwm_chip *puv3 = to_puv3(chip);
-
- return clk_prepare_enable(puv3->clk);
-}
-
-static void puv3_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct puv3_pwm_chip *puv3 = to_puv3(chip);
-
- clk_disable_unprepare(puv3->clk);
-}
-
-static const struct pwm_ops puv3_pwm_ops = {
- .config = puv3_pwm_config,
- .enable = puv3_pwm_enable,
- .disable = puv3_pwm_disable,
- .owner = THIS_MODULE,
-};
-
-static int pwm_probe(struct platform_device *pdev)
-{
- struct puv3_pwm_chip *puv3;
- struct resource *r;
- int ret;
-
- puv3 = devm_kzalloc(&pdev->dev, sizeof(*puv3), GFP_KERNEL);
- if (!puv3)
- return -ENOMEM;
-
- puv3->clk = devm_clk_get(&pdev->dev, "OST_CLK");
- if (IS_ERR(puv3->clk))
- return PTR_ERR(puv3->clk);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- puv3->base = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(puv3->base))
- return PTR_ERR(puv3->base);
-
- puv3->chip.dev = &pdev->dev;
- puv3->chip.ops = &puv3_pwm_ops;
- puv3->chip.base = -1;
- puv3->chip.npwm = 1;
-
- ret = pwmchip_add(&puv3->chip);
- if (ret < 0) {
- dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
- return ret;
- }
-
- platform_set_drvdata(pdev, puv3);
- return 0;
-}
-
-static int pwm_remove(struct platform_device *pdev)
-{
- struct puv3_pwm_chip *puv3 = platform_get_drvdata(pdev);
-
- return pwmchip_remove(&puv3->chip);
-}
-
-static struct platform_driver puv3_pwm_driver = {
- .driver = {
- .name = "PKUnity-v3-PWM",
- },
- .probe = pwm_probe,
- .remove = pwm_remove,
-};
-module_platform_driver(puv3_pwm_driver);
-
-MODULE_LICENSE("GPL v2");
--
2.26.2
Powered by blists - more mailing lists