lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200623065744.18393-7-rppt@kernel.org>
Date:   Tue, 23 Jun 2020 09:57:42 +0300
From:   Mike Rapoport <rppt@...nel.org>
To:     linux-kernel@...r.kernel.org
Cc:     Andrew Morton <akpm@...ux-foundation.org>,
        Arnd Bergmann <arnd@...db.de>,
        Guenter Roeck <linux@...ck-us.net>,
        Linus Torvalds <torvalds@...ux-foundation.org>,
        Mike Rapoport <rppt@...nel.org>,
        Mike Rapoport <rppt@...ux.ibm.com>
Subject: [PATCH 6/8] video: fbdev: remove fb-puv3  driver

From: Mike Rapoport <rppt@...ux.ibm.com>

The unicore32 port is removed from the kernel.
There is no point to keep stale fbdev driver for this architecture.

Signed-off-by: Mike Rapoport <rppt@...ux.ibm.com>
---
 MAINTAINERS                   |   1 -
 drivers/video/fbdev/Kconfig   |  11 -
 drivers/video/fbdev/Makefile  |   1 -
 drivers/video/fbdev/fb-puv3.c | 836 ----------------------------------
 4 files changed, 849 deletions(-)
 delete mode 100644 drivers/video/fbdev/fb-puv3.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 33db62d2daf6..b0da9ee8c027 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13586,7 +13586,6 @@ S:	Maintained
 W:	http://mprc.pku.edu.cn/~guanxuetao/linux
 T:	git git://github.com/gxt/linux.git
 F:	drivers/rtc/rtc-puv3.c
-F:	drivers/video/fbdev/fb-puv3.c
 
 PLANTOWER PMS7003 AIR POLLUTION SENSOR DRIVER
 M:	Tomasz Duszynski <tduszyns@...il.com>
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 0f559aeaf469..32a2698914c3 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2198,17 +2198,6 @@ config FB_BROADSHEET
 	  and could also have been called by other names when coupled with
 	  a bridge adapter.
 
-config FB_PUV3_UNIGFX
-	tristate "PKUnity v3 Unigfx framebuffer support"
-	depends on FB && UNICORE32 && ARCH_PUV3
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	help
-	  Choose this option if you want to use the Unigfx device as a
-	  framebuffer device. Without the support of PCI & AGP.
-
 config FB_HYPERV
 	tristate "Microsoft Hyper-V Synthetic Video support"
 	depends on FB && HYPERV
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index aa6352798cf4..a0705b99e643 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -116,7 +116,6 @@ obj-y                             += omap2/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
 obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
-obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
 obj-$(CONFIG_FB_HYPERV)		  += hyperv_fb.o
 obj-$(CONFIG_FB_OPENCORES)	  += ocfb.o
 obj-$(CONFIG_FB_SM712)		  += sm712fb.o
diff --git a/drivers/video/fbdev/fb-puv3.c b/drivers/video/fbdev/fb-puv3.c
deleted file mode 100644
index 030e85c11a78..000000000000
--- a/drivers/video/fbdev/fb-puv3.c
+++ /dev/null
@@ -1,836 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Frame Buffer Driver for PKUnity-v3 Unigfx
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/mm.h>
-
-#include <linux/sizes.h>
-#include <mach/hardware.h>
-
-/* Platform_data reserved for unifb registers. */
-#define UNIFB_REGS_NUM		10
-/* RAM reserved for the frame buffer. */
-#define UNIFB_MEMSIZE		(SZ_4M)		/* 4 MB for 1024*768*32b */
-
-/*
- * cause UNIGFX don not have EDID
- * all the modes are organized as follow
- */
-static const struct fb_videomode unifb_modes[] = {
-	/* 0 640x480-60 VESA */
-	{ "640x480@60",  60,  640, 480,  25175000,  48, 16, 34, 10,  96, 1,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-	/* 1 640x480-75 VESA */
-	{ "640x480@75",  75,  640, 480,  31500000, 120, 16, 18,  1,  64, 1,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-	/* 2 800x600-60 VESA */
-	{ "800x600@60",  60,  800, 600,  40000000,  88, 40, 26,  1, 128, 1,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-	/* 3 800x600-75 VESA */
-	{ "800x600@75",  75,  800, 600,  49500000, 160, 16, 23,  1,  80, 1,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-	/* 4 1024x768-60 VESA */
-	{ "1024x768@60", 60, 1024, 768,  65000000, 160, 24, 34,  3, 136, 1,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-	/* 5 1024x768-75 VESA */
-	{ "1024x768@75", 75, 1024, 768,  78750000, 176, 16, 30,  1,  96, 1,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-	/* 6 1280x960-60 VESA */
-	{ "1280x960@60", 60, 1280, 960, 108000000, 312, 96, 38,  1, 112, 1,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-	/* 7 1440x900-60 VESA */
-	{ "1440x900@60", 60, 1440, 900, 106500000, 232, 80, 30,  3, 152, 1,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-	/* 8 FIXME 9 1024x600-60 VESA UNTESTED */
-	{ "1024x600@60", 60, 1024, 600,  50650000, 160, 24, 26,  1, 136, 1,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-	/* 9 FIXME 10 1024x600-75 VESA UNTESTED */
-	{ "1024x600@75", 75, 1024, 600,  61500000, 176, 16, 23,  1,  96, 1,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-	/* 10 FIXME 11 1366x768-60 VESA UNTESTED */
-	{ "1366x768@60", 60, 1366, 768,  85500000, 256, 58, 18,  1,  112, 3,
-	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-};
-
-static const struct fb_var_screeninfo unifb_default = {
-	.xres =		640,
-	.yres =		480,
-	.xres_virtual =	640,
-	.yres_virtual =	480,
-	.bits_per_pixel = 16,
-	.red =		{ 11, 5, 0 },
-	.green =	{ 5,  6, 0 },
-	.blue =		{ 0,  5, 0 },
-	.activate =	FB_ACTIVATE_NOW,
-	.height =	-1,
-	.width =	-1,
-	.pixclock =	25175000,
-	.left_margin =	48,
-	.right_margin =	16,
-	.upper_margin =	33,
-	.lower_margin =	10,
-	.hsync_len =	96,
-	.vsync_len =	2,
-	.vmode =	FB_VMODE_NONINTERLACED,
-};
-
-static struct fb_fix_screeninfo unifb_fix = {
-	.id =		"UNIGFX FB",
-	.type =		FB_TYPE_PACKED_PIXELS,
-	.visual =	FB_VISUAL_TRUECOLOR,
-	.xpanstep =	1,
-	.ypanstep =	1,
-	.ywrapstep =	1,
-	.accel =	FB_ACCEL_NONE,
-};
-
-static void unifb_sync(struct fb_info *info)
-{
-	/* TODO: may, this can be replaced by interrupt */
-	int cnt;
-
-	for (cnt = 0; cnt < 0x10000000; cnt++) {
-		if (readl(UGE_COMMAND) & 0x1000000)
-			return;
-	}
-
-	if (cnt > 0x8000000)
-		dev_warn(info->device, "Warning: UniGFX GE time out ...\n");
-}
-
-static void unifb_prim_fillrect(struct fb_info *info,
-				const struct fb_fillrect *region)
-{
-	int awidth = region->width;
-	int aheight = region->height;
-	int m_iBpp = info->var.bits_per_pixel;
-	int screen_width = info->var.xres;
-	int src_sel = 1;	/* from fg_color */
-	int pat_sel = 1;
-	int src_x0 = 0;
-	int dst_x0 = region->dx;
-	int src_y0 = 0;
-	int dst_y0 = region->dy;
-	int rop_alpha_sel = 0;
-	int rop_alpha_code = 0xCC;
-	int x_dir = 1;
-	int y_dir = 1;
-	int alpha_r = 0;
-	int alpha_sel = 0;
-	int dst_pitch = screen_width * (m_iBpp / 8);
-	int dst_offset = dst_y0 * dst_pitch + dst_x0 * (m_iBpp / 8);
-	int src_pitch = screen_width * (m_iBpp / 8);
-	int src_offset = src_y0 * src_pitch + src_x0 * (m_iBpp / 8);
-	unsigned int command = 0;
-	int clip_region = 0;
-	int clip_en = 0;
-	int tp_en = 0;
-	int fg_color = 0;
-	int bottom = info->var.yres - 1;
-	int right = info->var.xres - 1;
-	int top = 0;
-
-	bottom = (bottom << 16) | right;
-	command = (rop_alpha_sel << 26) | (pat_sel << 18) | (src_sel << 16)
-		| (x_dir << 20) | (y_dir << 21) | (command << 24)
-		| (clip_region << 23) | (clip_en << 22) | (tp_en << 27);
-	src_pitch = (dst_pitch << 16) | src_pitch;
-	awidth = awidth | (aheight << 16);
-	alpha_r = ((rop_alpha_code & 0xff) << 8) | (alpha_r & 0xff)
-		| (alpha_sel << 16);
-	src_x0 = (src_x0 & 0x1fff) | ((src_y0 & 0x1fff) << 16);
-	dst_x0 = (dst_x0 & 0x1fff) | ((dst_y0 & 0x1fff) << 16);
-	fg_color = region->color;
-
-	unifb_sync(info);
-
-	writel(((u32 *)(info->pseudo_palette))[fg_color], UGE_FCOLOR);
-	writel(0, UGE_BCOLOR);
-	writel(src_pitch, UGE_PITCH);
-	writel(src_offset, UGE_SRCSTART);
-	writel(dst_offset, UGE_DSTSTART);
-	writel(awidth, UGE_WIDHEIGHT);
-	writel(top, UGE_CLIP0);
-	writel(bottom, UGE_CLIP1);
-	writel(alpha_r, UGE_ROPALPHA);
-	writel(src_x0, UGE_SRCXY);
-	writel(dst_x0, UGE_DSTXY);
-	writel(command, UGE_COMMAND);
-}
-
-static void unifb_fillrect(struct fb_info *info,
-		const struct fb_fillrect *region)
-{
-	struct fb_fillrect modded;
-	int vxres, vyres;
-
-	if (info->flags & FBINFO_HWACCEL_DISABLED) {
-		sys_fillrect(info, region);
-		return;
-	}
-
-	vxres = info->var.xres_virtual;
-	vyres = info->var.yres_virtual;
-
-	memcpy(&modded, region, sizeof(struct fb_fillrect));
-
-	if (!modded.width || !modded.height ||
-	    modded.dx >= vxres || modded.dy >= vyres)
-		return;
-
-	if (modded.dx + modded.width > vxres)
-		modded.width = vxres - modded.dx;
-	if (modded.dy + modded.height > vyres)
-		modded.height = vyres - modded.dy;
-
-	unifb_prim_fillrect(info, &modded);
-}
-
-static void unifb_prim_copyarea(struct fb_info *info,
-				const struct fb_copyarea *area)
-{
-	int awidth = area->width;
-	int aheight = area->height;
-	int m_iBpp = info->var.bits_per_pixel;
-	int screen_width = info->var.xres;
-	int src_sel = 2;	/* from mem */
-	int pat_sel = 0;
-	int src_x0 = area->sx;
-	int dst_x0 = area->dx;
-	int src_y0 = area->sy;
-	int dst_y0 = area->dy;
-
-	int rop_alpha_sel = 0;
-	int rop_alpha_code = 0xCC;
-	int x_dir = 1;
-	int y_dir = 1;
-
-	int alpha_r = 0;
-	int alpha_sel = 0;
-	int dst_pitch = screen_width * (m_iBpp / 8);
-	int dst_offset = dst_y0 * dst_pitch + dst_x0 * (m_iBpp / 8);
-	int src_pitch = screen_width * (m_iBpp / 8);
-	int src_offset = src_y0 * src_pitch + src_x0 * (m_iBpp / 8);
-	unsigned int command = 0;
-	int clip_region = 0;
-	int clip_en = 1;
-	int tp_en = 0;
-	int top = 0;
-	int bottom = info->var.yres;
-	int right = info->var.xres;
-	int fg_color = 0;
-	int bg_color = 0;
-
-	if (src_x0 < 0)
-		src_x0 = 0;
-	if (src_y0 < 0)
-		src_y0 = 0;
-
-	if (src_y0 - dst_y0 > 0) {
-		y_dir = 1;
-	} else {
-		y_dir = 0;
-		src_offset = (src_y0 + aheight) * src_pitch +
-				src_x0 * (m_iBpp / 8);
-		dst_offset = (dst_y0 + aheight) * dst_pitch +
-				dst_x0 * (m_iBpp / 8);
-		src_y0 += aheight;
-		dst_y0 += aheight;
-	}
-
-	command = (rop_alpha_sel << 26) | (pat_sel << 18) | (src_sel << 16) |
-		(x_dir << 20) | (y_dir << 21) | (command << 24) |
-		(clip_region << 23) | (clip_en << 22) | (tp_en << 27);
-	src_pitch = (dst_pitch << 16) | src_pitch;
-	awidth = awidth | (aheight << 16);
-	alpha_r = ((rop_alpha_code & 0xff) << 8) | (alpha_r & 0xff) |
-		(alpha_sel << 16);
-	src_x0 = (src_x0 & 0x1fff) | ((src_y0 & 0x1fff) << 16);
-	dst_x0 = (dst_x0 & 0x1fff) | ((dst_y0 & 0x1fff) << 16);
-	bottom = (bottom << 16) | right;
-
-	unifb_sync(info);
-
-	writel(src_pitch, UGE_PITCH);
-	writel(src_offset, UGE_SRCSTART);
-	writel(dst_offset, UGE_DSTSTART);
-	writel(awidth, UGE_WIDHEIGHT);
-	writel(top, UGE_CLIP0);
-	writel(bottom, UGE_CLIP1);
-	writel(bg_color, UGE_BCOLOR);
-	writel(fg_color, UGE_FCOLOR);
-	writel(alpha_r, UGE_ROPALPHA);
-	writel(src_x0, UGE_SRCXY);
-	writel(dst_x0, UGE_DSTXY);
-	writel(command, UGE_COMMAND);
-}
-
-static void unifb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
-{
-	struct fb_copyarea modded;
-	u32 vxres, vyres;
-	modded.sx = area->sx;
-	modded.sy = area->sy;
-	modded.dx = area->dx;
-	modded.dy = area->dy;
-	modded.width = area->width;
-	modded.height = area->height;
-
-	if (info->flags & FBINFO_HWACCEL_DISABLED) {
-		sys_copyarea(info, area);
-		return;
-	}
-
-	vxres = info->var.xres_virtual;
-	vyres = info->var.yres_virtual;
-
-	if (!modded.width || !modded.height ||
-	    modded.sx >= vxres || modded.sy >= vyres ||
-	    modded.dx >= vxres || modded.dy >= vyres)
-		return;
-
-	if (modded.sx + modded.width > vxres)
-		modded.width = vxres - modded.sx;
-	if (modded.dx + modded.width > vxres)
-		modded.width = vxres - modded.dx;
-	if (modded.sy + modded.height > vyres)
-		modded.height = vyres - modded.sy;
-	if (modded.dy + modded.height > vyres)
-		modded.height = vyres - modded.dy;
-
-	unifb_prim_copyarea(info, &modded);
-}
-
-static void unifb_imageblit(struct fb_info *info, const struct fb_image *image)
-{
-	sys_imageblit(info, image);
-}
-
-static u_long get_line_length(int xres_virtual, int bpp)
-{
-	u_long length;
-
-	length = xres_virtual * bpp;
-	length = (length + 31) & ~31;
-	length >>= 3;
-	return length;
-}
-
-/*
- *  Setting the video mode has been split into two parts.
- *  First part, xxxfb_check_var, must not write anything
- *  to hardware, it should only verify and adjust var.
- *  This means it doesn't alter par but it does use hardware
- *  data from it to check this var.
- */
-static int unifb_check_var(struct fb_var_screeninfo *var,
-			 struct fb_info *info)
-{
-	u_long line_length;
-
-	/*
-	 *  FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
-	 *  as FB_VMODE_SMOOTH_XPAN is only used internally
-	 */
-
-	if (var->vmode & FB_VMODE_CONUPDATE) {
-		var->vmode |= FB_VMODE_YWRAP;
-		var->xoffset = info->var.xoffset;
-		var->yoffset = info->var.yoffset;
-	}
-
-	/*
-	 *  Some very basic checks
-	 */
-	if (!var->xres)
-		var->xres = 1;
-	if (!var->yres)
-		var->yres = 1;
-	if (var->xres > var->xres_virtual)
-		var->xres_virtual = var->xres;
-	if (var->yres > var->yres_virtual)
-		var->yres_virtual = var->yres;
-	if (var->bits_per_pixel <= 1)
-		var->bits_per_pixel = 1;
-	else if (var->bits_per_pixel <= 8)
-		var->bits_per_pixel = 8;
-	else if (var->bits_per_pixel <= 16)
-		var->bits_per_pixel = 16;
-	else if (var->bits_per_pixel <= 24)
-		var->bits_per_pixel = 24;
-	else if (var->bits_per_pixel <= 32)
-		var->bits_per_pixel = 32;
-	else
-		return -EINVAL;
-
-	if (var->xres_virtual < var->xoffset + var->xres)
-		var->xres_virtual = var->xoffset + var->xres;
-	if (var->yres_virtual < var->yoffset + var->yres)
-		var->yres_virtual = var->yoffset + var->yres;
-
-	/*
-	 *  Memory limit
-	 */
-	line_length =
-	    get_line_length(var->xres_virtual, var->bits_per_pixel);
-	if (line_length * var->yres_virtual > UNIFB_MEMSIZE)
-		return -ENOMEM;
-
-	/*
-	 * Now that we checked it we alter var. The reason being is that the
-	 * video mode passed in might not work but slight changes to it might
-	 * make it work. This way we let the user know what is acceptable.
-	 */
-	switch (var->bits_per_pixel) {
-	case 1:
-	case 8:
-		var->red.offset = 0;
-		var->red.length = 8;
-		var->green.offset = 0;
-		var->green.length = 8;
-		var->blue.offset = 0;
-		var->blue.length = 8;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		break;
-	case 16:		/* RGBA 5551 */
-		if (var->transp.length) {
-			var->red.offset = 0;
-			var->red.length = 5;
-			var->green.offset = 5;
-			var->green.length = 5;
-			var->blue.offset = 10;
-			var->blue.length = 5;
-			var->transp.offset = 15;
-			var->transp.length = 1;
-		} else {	/* RGB 565 */
-			var->red.offset = 11;
-			var->red.length = 5;
-			var->green.offset = 5;
-			var->green.length = 6;
-			var->blue.offset = 0;
-			var->blue.length = 5;
-			var->transp.offset = 0;
-			var->transp.length = 0;
-		}
-		break;
-	case 24:		/* RGB 888 */
-		var->red.offset = 0;
-		var->red.length = 8;
-		var->green.offset = 8;
-		var->green.length = 8;
-		var->blue.offset = 16;
-		var->blue.length = 8;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		break;
-	case 32:		/* RGBA 8888 */
-		var->red.offset = 16;
-		var->red.length = 8;
-		var->green.offset = 8;
-		var->green.length = 8;
-		var->blue.offset = 0;
-		var->blue.length = 8;
-		var->transp.offset = 24;
-		var->transp.length = 8;
-		break;
-	}
-	var->red.msb_right = 0;
-	var->green.msb_right = 0;
-	var->blue.msb_right = 0;
-	var->transp.msb_right = 0;
-
-	return 0;
-}
-
-/*
- * This routine actually sets the video mode. It's in here where we
- * the hardware state info->par and fix which can be affected by the
- * change in par. For this driver it doesn't do much.
- */
-static int unifb_set_par(struct fb_info *info)
-{
-	int hTotal, vTotal, hSyncStart, hSyncEnd, vSyncStart, vSyncEnd;
-	int format;
-
-#ifdef CONFIG_PUV3_PM
-	struct clk *clk_vga;
-	u32 pixclk = 0;
-	int i;
-
-	for (i = 0; i <= 10; i++) {
-		if    (info->var.xres         == unifb_modes[i].xres
-		    && info->var.yres         == unifb_modes[i].yres
-		    && info->var.upper_margin == unifb_modes[i].upper_margin
-		    && info->var.lower_margin == unifb_modes[i].lower_margin
-		    && info->var.left_margin  == unifb_modes[i].left_margin
-		    && info->var.right_margin == unifb_modes[i].right_margin
-		    && info->var.hsync_len    == unifb_modes[i].hsync_len
-		    && info->var.vsync_len    == unifb_modes[i].vsync_len) {
-			pixclk = unifb_modes[i].pixclock;
-			break;
-		}
-	}
-
-	/* set clock rate */
-	clk_vga = clk_get(info->device, "VGA_CLK");
-	if (clk_vga == ERR_PTR(-ENOENT))
-		return -ENOENT;
-
-	if (pixclk != 0) {
-		if (clk_set_rate(clk_vga, pixclk)) { /* set clock failed */
-			info->fix = unifb_fix;
-			info->var = unifb_default;
-			if (clk_set_rate(clk_vga, unifb_default.pixclock))
-				return -EINVAL;
-		}
-	}
-#endif
-
-	info->fix.line_length = get_line_length(info->var.xres_virtual,
-						info->var.bits_per_pixel);
-
-	hSyncStart = info->var.xres + info->var.right_margin;
-	hSyncEnd = hSyncStart + info->var.hsync_len;
-	hTotal = hSyncEnd + info->var.left_margin;
-
-	vSyncStart = info->var.yres + info->var.lower_margin;
-	vSyncEnd = vSyncStart + info->var.vsync_len;
-	vTotal = vSyncEnd + info->var.upper_margin;
-
-	switch (info->var.bits_per_pixel) {
-	case 8:
-		format = UDE_CFG_DST8;
-		break;
-	case 16:
-		format = UDE_CFG_DST16;
-		break;
-	case 24:
-		format = UDE_CFG_DST24;
-		break;
-	case 32:
-		format = UDE_CFG_DST32;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(info->fix.smem_start, UDE_FSA);
-	writel(info->var.yres, UDE_LS);
-	writel(get_line_length(info->var.xres,
-			info->var.bits_per_pixel) >> 3, UDE_PS);
-			/* >> 3 for hardware required. */
-	writel((hTotal << 16) | (info->var.xres), UDE_HAT);
-	writel(((hTotal - 1) << 16) | (info->var.xres - 1), UDE_HBT);
-	writel(((hSyncEnd - 1) << 16) | (hSyncStart - 1), UDE_HST);
-	writel((vTotal << 16) | (info->var.yres), UDE_VAT);
-	writel(((vTotal - 1) << 16) | (info->var.yres - 1), UDE_VBT);
-	writel(((vSyncEnd - 1) << 16) | (vSyncStart - 1), UDE_VST);
-	writel(UDE_CFG_GDEN_ENABLE | UDE_CFG_TIMEUP_ENABLE
-			| format | 0xC0000001, UDE_CFG);
-
-	return 0;
-}
-
-/*
- *  Set a single color register. The values supplied are already
- *  rounded down to the hardware's capabilities (according to the
- *  entries in the var structure). Return != 0 for invalid regno.
- */
-static int unifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-			 u_int transp, struct fb_info *info)
-{
-	if (regno >= 256)	/* no. of hw registers */
-		return 1;
-
-	/* grayscale works only partially under directcolor */
-	if (info->var.grayscale) {
-		/* grayscale = 0.30*R + 0.59*G + 0.11*B */
-		red = green = blue =
-		    (red * 77 + green * 151 + blue * 28) >> 8;
-	}
-
-#define CNVT_TOHW(val, width) ((((val)<<(width))+0x7FFF-(val))>>16)
-	switch (info->fix.visual) {
-	case FB_VISUAL_TRUECOLOR:
-	case FB_VISUAL_PSEUDOCOLOR:
-		red = CNVT_TOHW(red, info->var.red.length);
-		green = CNVT_TOHW(green, info->var.green.length);
-		blue = CNVT_TOHW(blue, info->var.blue.length);
-		transp = CNVT_TOHW(transp, info->var.transp.length);
-		break;
-	case FB_VISUAL_DIRECTCOLOR:
-		red = CNVT_TOHW(red, 8);	/* expect 8 bit DAC */
-		green = CNVT_TOHW(green, 8);
-		blue = CNVT_TOHW(blue, 8);
-		/* hey, there is bug in transp handling... */
-		transp = CNVT_TOHW(transp, 8);
-		break;
-	}
-#undef CNVT_TOHW
-	/* Truecolor has hardware independent palette */
-	if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
-		u32 v;
-
-		if (regno >= 16)
-			return 1;
-
-		v = (red << info->var.red.offset) |
-		    (green << info->var.green.offset) |
-		    (blue << info->var.blue.offset) |
-		    (transp << info->var.transp.offset);
-		switch (info->var.bits_per_pixel) {
-		case 8:
-			break;
-		case 16:
-		case 24:
-		case 32:
-			((u32 *) (info->pseudo_palette))[regno] = v;
-			break;
-		default:
-			return 1;
-		}
-		return 0;
-	}
-	return 0;
-}
-
-/*
- *  Pan or Wrap the Display
- *
- *  This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
- */
-static int unifb_pan_display(struct fb_var_screeninfo *var,
-			   struct fb_info *info)
-{
-	if (var->vmode & FB_VMODE_YWRAP) {
-		if (var->yoffset < 0
-		    || var->yoffset >= info->var.yres_virtual
-		    || var->xoffset)
-			return -EINVAL;
-	} else {
-		if (var->xoffset + info->var.xres > info->var.xres_virtual ||
-		    var->yoffset + info->var.yres > info->var.yres_virtual)
-			return -EINVAL;
-	}
-	info->var.xoffset = var->xoffset;
-	info->var.yoffset = var->yoffset;
-	if (var->vmode & FB_VMODE_YWRAP)
-		info->var.vmode |= FB_VMODE_YWRAP;
-	else
-		info->var.vmode &= ~FB_VMODE_YWRAP;
-	return 0;
-}
-
-int unifb_mmap(struct fb_info *info,
-		    struct vm_area_struct *vma)
-{
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
-	return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
-}
-
-static const struct fb_ops unifb_ops = {
-	.fb_read        = fb_sys_read,
-	.fb_write       = fb_sys_write,
-	.fb_check_var	= unifb_check_var,
-	.fb_set_par	= unifb_set_par,
-	.fb_setcolreg	= unifb_setcolreg,
-	.fb_pan_display	= unifb_pan_display,
-	.fb_fillrect	= unifb_fillrect,
-	.fb_copyarea	= unifb_copyarea,
-	.fb_imageblit   = unifb_imageblit,
-	.fb_mmap	= unifb_mmap,
-};
-
-/*
- *  Initialisation
- */
-static int unifb_probe(struct platform_device *dev)
-{
-	struct fb_info *info;
-	u32 unifb_regs[UNIFB_REGS_NUM];
-	int retval = -ENOMEM;
-	struct resource *iomem;
-	void *videomemory;
-
-	videomemory = (void *)__get_free_pages(GFP_KERNEL | __GFP_COMP,
-				get_order(UNIFB_MEMSIZE));
-	if (!videomemory)
-		goto err;
-
-	memset(videomemory, 0, UNIFB_MEMSIZE);
-
-	unifb_fix.smem_start = virt_to_phys(videomemory);
-	unifb_fix.smem_len = UNIFB_MEMSIZE;
-
-	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	unifb_fix.mmio_start = iomem->start;
-
-	info = framebuffer_alloc(sizeof(u32)*256, &dev->dev);
-	if (!info)
-		goto err;
-
-	info->screen_base = (char __iomem *)videomemory;
-	info->fbops = &unifb_ops;
-
-	retval = fb_find_mode(&info->var, info, NULL,
-			      unifb_modes, 10, &unifb_modes[0], 16);
-
-	if (!retval || (retval == 4))
-		info->var = unifb_default;
-
-	info->fix = unifb_fix;
-	info->pseudo_palette = info->par;
-	info->par = NULL;
-	info->flags = FBINFO_FLAG_DEFAULT;
-#ifdef FB_ACCEL_PUV3_UNIGFX
-	info->fix.accel = FB_ACCEL_PUV3_UNIGFX;
-#endif
-
-	retval = fb_alloc_cmap(&info->cmap, 256, 0);
-	if (retval < 0)
-		goto err1;
-
-	retval = register_framebuffer(info);
-	if (retval < 0)
-		goto err2;
-	platform_set_drvdata(dev, info);
-	platform_device_add_data(dev, unifb_regs, sizeof(u32) * UNIFB_REGS_NUM);
-
-	fb_info(info, "Virtual frame buffer device, using %dM of video memory\n",
-		UNIFB_MEMSIZE >> 20);
-	return 0;
-err2:
-	fb_dealloc_cmap(&info->cmap);
-err1:
-	framebuffer_release(info);
-err:
-	return retval;
-}
-
-static int unifb_remove(struct platform_device *dev)
-{
-	struct fb_info *info = platform_get_drvdata(dev);
-
-	if (info) {
-		unregister_framebuffer(info);
-		fb_dealloc_cmap(&info->cmap);
-		framebuffer_release(info);
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int unifb_resume(struct platform_device *dev)
-{
-	int rc = 0;
-	u32 *unifb_regs = dev->dev.platform_data;
-
-	if (dev->dev.power.power_state.event == PM_EVENT_ON)
-		return 0;
-
-	console_lock();
-
-	if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-		writel(unifb_regs[0], UDE_FSA);
-		writel(unifb_regs[1], UDE_LS);
-		writel(unifb_regs[2], UDE_PS);
-		writel(unifb_regs[3], UDE_HAT);
-		writel(unifb_regs[4], UDE_HBT);
-		writel(unifb_regs[5], UDE_HST);
-		writel(unifb_regs[6], UDE_VAT);
-		writel(unifb_regs[7], UDE_VBT);
-		writel(unifb_regs[8], UDE_VST);
-		writel(unifb_regs[9], UDE_CFG);
-	}
-	dev->dev.power.power_state = PMSG_ON;
-
-	console_unlock();
-
-	return rc;
-}
-
-static int unifb_suspend(struct platform_device *dev, pm_message_t mesg)
-{
-	u32 *unifb_regs = dev->dev.platform_data;
-
-	unifb_regs[0] = readl(UDE_FSA);
-	unifb_regs[1] = readl(UDE_LS);
-	unifb_regs[2] = readl(UDE_PS);
-	unifb_regs[3] = readl(UDE_HAT);
-	unifb_regs[4] = readl(UDE_HBT);
-	unifb_regs[5] = readl(UDE_HST);
-	unifb_regs[6] = readl(UDE_VAT);
-	unifb_regs[7] = readl(UDE_VBT);
-	unifb_regs[8] = readl(UDE_VST);
-	unifb_regs[9] = readl(UDE_CFG);
-
-	if (mesg.event == dev->dev.power.power_state.event)
-		return 0;
-
-	switch (mesg.event) {
-	case PM_EVENT_FREEZE:		/* about to take snapshot */
-	case PM_EVENT_PRETHAW:		/* before restoring snapshot */
-		goto done;
-	}
-
-	console_lock();
-
-	/* do nothing... */
-
-	console_unlock();
-
-done:
-	dev->dev.power.power_state = mesg;
-
-	return 0;
-}
-#else
-#define	unifb_resume	NULL
-#define unifb_suspend	NULL
-#endif
-
-static struct platform_driver unifb_driver = {
-	.probe	 = unifb_probe,
-	.remove  = unifb_remove,
-	.resume  = unifb_resume,
-	.suspend = unifb_suspend,
-	.driver  = {
-		.name	= "PKUnity-v3-UNIGFX",
-	},
-};
-
-static int __init unifb_init(void)
-{
-#ifndef MODULE
-	if (fb_get_options("unifb", NULL))
-		return -ENODEV;
-#endif
-
-	return platform_driver_register(&unifb_driver);
-}
-
-module_init(unifb_init);
-
-static void __exit unifb_exit(void)
-{
-	platform_driver_unregister(&unifb_driver);
-}
-
-module_exit(unifb_exit);
-
-MODULE_LICENSE("GPL v2");
-- 
2.26.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ