linux-kernel - [PATCH] ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1592904672-12781-1-git-send-email-alain.volmat@st.com>
Date:   Tue, 23 Jun 2020 11:31:12 +0200
From:   Alain Volmat <alain.volmat@...com>
To:     <wsa@...nel.org>, <robh+dt@...nel.org>
CC:     <mark.rutland@....com>, <pierre-yves.mordret@...com>,
        <mcoquelin.stm32@...il.com>, <alexandre.torgue@...com>,
        <linux-i2c@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <fabrice.gasnier@...com>,
        <alain.volmat@...com>
Subject: [PATCH] ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx

From: Fabrice Gasnier <fabrice.gasnier@...com>

Configure I2C5 on stm32mp15 DK boards. It's available and can be used on:
- Arduino connector
- GPIO expansion connector
Keep it disabled by default, so the pins are kept in their initial state to
lower power consumption. This way they can also be used as GPIO.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
Signed-off-by: Alain Volmat <alain.volmat@...com>
---
 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index fcf50131e5fe..e69aba9830b3 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -361,6 +361,19 @@
 	};
 };
 
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
 &i2s2 {
 	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
 	clock-names = "pclk", "i2sclk", "x8k", "x11k";
-- 
2.17.1