| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <50a1abf6-ecb0-b130-67be-20364965a514@ti.com>
Date: Wed, 24 Jun 2020 16:08:07 -0500
From: Suman Anna <s-anna@...com>
To: Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>
CC: Lokesh Vutla <lokeshvutla@...com>,
Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>,
<linux-remoteproc@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 4/6] dt-bindings: remoteproc: Add bindings for C66x
DSPs on TI K3 SoCs
Hi Rob,
On 6/12/20 5:49 PM, Suman Anna wrote:
> Some Texas Instruments K3 family of SoCs have one of more Digital Signal
> Processor (DSP) subsystems that are comprised of either a TMS320C66x
> CorePac and/or a next-generation TMS320C71x CorePac processor subsystem.
> Add the device tree bindings document for the C66x DSP devices on these
> SoCs. The added example illustrates the DT nodes for the first C66x DSP
> device present on the K3 J721E family of SoCs.
>
> Signed-off-by: Suman Anna <s-anna@...com>
> ---
> v3:
> - Refactored the common ti-sci properties "ti,sci", "ti,sci-dev-id" and
> "ti,sci-proc-ids" into a separate binding ti,k3-sci-proc.yaml.
> - Dropped the general description and maxItems against reg and reg-names
> - Added items list under reg
> - Removed the other binding references from the description for resets
> and mboxes
> - Revised the memory-region description and listed the mandatory items
> - Updated example to drop reserved-memory nodes, unused node labels
Thanks for acking the corresponding C71x binding update [1] that is on
top of this patch.
Can you provide your Ack for this updated patch and the refactored
ti,k3-sci-proc.yaml binding if you don't have any comments?
regards
Suman
[1] https://patchwork.kernel.org/comment/23421509/
> v2: https://patchwork.kernel.org/patch/11561781/
>
> .../bindings/remoteproc/ti,k3-dsp-rproc.yaml | 139 ++++++++++++++++++
> 1 file changed, 139 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
> new file mode 100644
> index 000000000000..f03e88c42a6e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
> @@ -0,0 +1,139 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI K3 DSP devices
> +
> +maintainers:
> + - Suman Anna <s-anna@...com>
> +
> +description: |
> + The TI K3 family of SoCs usually have one or more TI DSP Core sub-systems
> + that are used to offload some of the processor-intensive tasks or algorithms,
> + for achieving various system level goals.
> +
> + These processor sub-systems usually contain additional sub-modules like
> + L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory
> + controller, a dedicated local power/sleep controller etc. The DSP processor
> + cores in the K3 SoCs are usually either a TMS320C66x CorePac processor or a
> + TMS320C71x CorePac processor.
> +
> + Each DSP Core sub-system is represented as a single DT node. Each node has a
> + number of required or optional properties that enable the OS running on the
> + host processor (Arm CorePac) to perform the device management of the remote
> + processor and to communicate with the remote processor.
> +
> +allOf:
> + - $ref: "ti,k3-sci-proc.yaml#"
> +
> +properties:
> + compatible:
> + const: ti,j721e-c66-dsp
> + description:
> + Use "ti,j721e-c66-dsp" for C66x DSPs on K3 J721E SoCs
> +
> + reg:
> + items:
> + - description: Address and Size of the L2 SRAM internal memory region
> + - description: Address and Size of the L1 PRAM internal memory region
> + - description: Address and Size of the L1 DRAM internal memory region
> +
> + reg-names:
> + items:
> + - const: l2sram
> + - const: l1pram
> + - const: l1dram
> +
> + resets:
> + description: |
> + Should contain the phandle to the reset controller node managing the
> + local resets for this device, and a reset specifier.
> + maxItems: 1
> +
> + firmware-name:
> + description: |
> + Should contain the name of the default firmware image
> + file located on the firmware search path
> +
> + mboxes:
> + description: |
> + OMAP Mailbox specifier denoting the sub-mailbox, to be used for
> + communication with the remote processor. This property should match
> + with the sub-mailbox node used in the firmware image.
> + maxItems: 1
> +
> + memory-region:
> + minItems: 2
> + maxItems: 8
> + description: |
> + phandle to the reserved memory nodes to be associated with the remoteproc
> + device. There should be at least two reserved memory nodes defined. The
> + reserved memory nodes should be carveout nodes, and should be defined as
> + per the bindings in
> + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
> + items:
> + - description: region used for dynamic DMA allocations like vrings and
> + vring buffers
> + - description: region reserved for firmware image sections
> + additionalItems: true
> +
> +# Optional properties:
> +# --------------------
> +
> + sram:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + minItems: 1
> + maxItems: 4
> + description: |
> + phandles to one or more reserved on-chip SRAM regions. The regions
> + should be defined as child nodes of the respective SRAM node, and
> + should be defined as per the generic bindings in,
> + Documentation/devicetree/bindings/sram/sram.yaml
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - resets
> + - firmware-name
> + - mboxes
> + - memory-region
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + / {
> + model = "Texas Instruments K3 J721E SoC";
> + compatible = "ti,j721e";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + bus@...000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
> + <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
> + <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>; /* C66_1 */
> +
> + /* J721E C66_0 DSP node */
> + dsp@...0800000 {
> + compatible = "ti,j721e-c66-dsp";
> + reg = <0x4d 0x80800000 0x00 0x00048000>,
> + <0x4d 0x80e00000 0x00 0x00008000>,
> + <0x4d 0x80f00000 0x00 0x00008000>;
> + reg-names = "l2sram", "l1pram", "l1dram";
> + ti,sci = <&dmsc>;
> + ti,sci-dev-id = <142>;
> + ti,sci-proc-ids = <0x03 0xFF>;
> + resets = <&k3_reset 142 1>;
> + firmware-name = "j7-c66_0-fw";
> + memory-region = <&c66_0_dma_memory_region>,
> + <&c66_0_memory_region>;
> + mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
> + };
> + };
> + };
>
Powered by blists - more mailing lists