linux-kernel - Re: [PATCH 5/7] iommu/vt-d: Fix devTLB flush for vSVA

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200623173813.6a02353c@jacob-builder>
Date:   Tue, 23 Jun 2020 17:38:13 -0700
From:   Jacob Pan <jacob.jun.pan@...ux.intel.com>
To:     iommu@...ts.linux-foundation.org,
        LKML <linux-kernel@...r.kernel.org>,
        "Lu Baolu" <baolu.lu@...ux.intel.com>,
        Joerg Roedel <joro@...tes.org>,
        David Woodhouse <dwmw2@...radead.org>
Cc:     Yi Liu <yi.l.liu@...el.com>, "Tian, Kevin" <kevin.tian@...el.com>,
        Raj Ashok <ashok.raj@...el.com>,
        Eric Auger <eric.auger@...hat.com>,
        jacob.jun.pan@...ux.intel.com
Subject: Re: [PATCH 5/7] iommu/vt-d: Fix devTLB flush for vSVA

On Tue, 23 Jun 2020 08:43:14 -0700
Jacob Pan <jacob.jun.pan@...ux.intel.com> wrote:

> From: Liu Yi L <yi.l.liu@...el.com>
> 
> For guest SVA usage, in order to optimize for less VMEXIT, guest
> request of IOTLB flush also includes device TLB.
> 
> On the host side, IOMMU driver performs IOTLB and implicit devTLB
> invalidation. When PASID-selective granularity is requested by the
> guest we need to derive the equivalent address range for devTLB
> instead of using the address information in the UAPI data. The reason
> for that is, unlike IOTLB flush, devTLB flush does not support
> PASID-selective granularity. This is to say, we need to set the
> following in the PASID based devTLB invalidation descriptor:
> - entire 64 bit range in address ~(0x1 << 63)
> - S bit = 1 (VT-d CH 6.5.2.6).
> 
> Without this fix, device TLB flush range is not set properly for PASID
> selective granularity. This patch also merged devTLB flush code for
> both implicit and explicit cases.
> 
> Fixes: 6ee1b77ba3ac ("iommu/vt-d: Add svm/sva invalidate function")
> Signed-off-by: Liu Yi L <yi.l.liu@...el.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> ---
>  drivers/iommu/intel/iommu.c | 25 +++++++++++++++++--------
>  1 file changed, 17 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index 96340da57075..5ea5732d5ec4 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -5408,7 +5408,7 @@ intel_iommu_sva_invalidate(struct iommu_domain
> *domain, struct device *dev, sid = PCI_DEVID(bus, devfn);
>  
>  	/* Size is only valid in address selective invalidation */
> -	if (inv_info->granularity != IOMMU_INV_GRANU_PASID)
> +	if (inv_info->granularity == IOMMU_INV_GRANU_ADDR)
>  		size = to_vtd_size(inv_info->addr_info.granule_size,
>  				   inv_info->addr_info.nb_granules);
>  
> @@ -5417,6 +5417,7 @@ intel_iommu_sva_invalidate(struct iommu_domain
> *domain, struct device *dev, IOMMU_CACHE_INV_TYPE_NR) {
>  		int granu = 0;
>  		u64 pasid = 0;
> +		u64 addr = 0;
>  
>  		granu = to_vtd_granularity(cache_type,
> inv_info->granularity); if (granu == -EINVAL) {
> @@ -5456,19 +5457,27 @@ intel_iommu_sva_invalidate(struct
> iommu_domain *domain, struct device *dev, (granu ==
> QI_GRAN_NONG_PASID) ? -1 : 1 << size, inv_info->addr_info.flags &
> IOMMU_INV_ADDR_FLAGS_LEAF); 
> +			if (!info->ats_enabled)
> +				break;
>  			/*
>  			 * Always flush device IOTLB if ATS is
> enabled. vIOMMU
>  			 * in the guest may assume IOTLB flush is
> inclusive,
>  			 * which is more efficient.
>  			 */
> -			if (info->ats_enabled)
> -				qi_flush_dev_iotlb_pasid(iommu, sid,
> -						info->pfsid, pasid,
> -						info->ats_qdep,
> -
> inv_info->addr_info.addr,
> -						size);
> -			break;
> +			fallthrough;
>  		case IOMMU_CACHE_INV_TYPE_DEV_IOTLB:
> +			/*
> +			 * There is no PASID selective flush for
> device TLB, so
> +			 * the equivalent of that is we set the size
> to be the
> +			 * entire range of 64 bit. User only
> provides PASID info
> +			 * without address info. So we set addr to 0.
> +			 */
> +			if (inv_info->granularity ==
> IOMMU_INV_GRANU_PASID) {
> +				size = 64 - VTD_PAGE_SHIFT;
> +				addr = 0;
> +			} else if (inv_info->granularity ==
> IOMMU_INV_GRANU_ADDR)
> +				addr = inv_info->addr_info.addr;
> +
>  			if (info->ats_enabled)
>  				qi_flush_dev_iotlb_pasid(iommu, sid,
>  						info->pfsid, pasid,
addr should be used here. will fix in the next version. Baolu has
pointed out this before but missed it here.

Jacob