linux-kernel - [PATCH v4 2/3] hwmon: add Documentation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200624072154.22486-3-mail@mariuszachmann.de>
Date:   Wed, 24 Jun 2020 09:21:53 +0200
From:   Marius Zachmann <mail@...iuszachmann.de>
To:     Guenter Roeck <linux@...ck-us.net>,
        Jean Delvare <jdelvare@...e.com>,
        Jiri Kosina <jikos@...nel.org>,
        Benjamin Tissoires <benjamin.tissoires@...hat.com>
Cc:     Marius Zachmann <mail@...iuszachmann.de>,
        linux-hwmon@...r.kernel.org, linux-doc@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-input@...r.kernel.org
Subject: [PATCH v4 2/3] hwmon: add Documentation

Signed-off-by: Marius Zachmann <mail@...iuszachmann.de>
---
 Documentation/hwmon/corsair-cpro.rst | 40 ++++++++++++++++++++++++++++
 Documentation/hwmon/index.rst        |  1 +
 2 files changed, 41 insertions(+)
 create mode 100644 Documentation/hwmon/corsair-cpro.rst

diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst
new file mode 100644
index 000000000000..2383c6f72115
--- /dev/null
+++ b/Documentation/hwmon/corsair-cpro.rst
@@ -0,0 +1,40 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver corsair-cpro
+==========================
+
+Supported devices:
+
+  * Corsair Commander Pro
+  * Corsair Commander Pro (1000D)
+
+Author: Marius Zachmann
+
+Description
+-----------
+
+This driver implements the sysfs interface for the Corsair Commander Pro.
+The Corsair Commander Pro is a USB device with 6 fan connectors,
+4 temperature sensor connectors and 2 Corsair LED connectors.
+It can read the voltage levels on the SATA power connector.
+
+Usage Notes
+-----------
+
+Since it is a USB device, hotswapping is possible. The device is autodetected.
+
+Sysfs entries
+-------------
+
+======================= =====================================================================
+in0_input		Voltage on SATA 12v
+in1_input		Voltage on SATA 5v
+in2_input		Voltage on SATA 3.3v
+temp[1-4]_input		Temperature on connected temperature sensors
+temp[1-4] label		Shows "nc" after name, when not connected
+fan[1-6]_input		Connected fan rpm.
+fan[1-6]_label		Shows connection status of the fan as detected by the device.
+pwm[1-6]		Sets the fan speed. Values from 0-255.
+			When reading, it reports the last value if it was set by the driver.
+			Otherwise returns 0.
+======================= =====================================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 55ff4b7c5349..750d3a975d82 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -47,6 +47,7 @@ Hardware Monitoring Kernel Drivers
    bel-pfe
    bt1-pvt
    coretemp
+   corsair-cpro
    da9052
    da9055
    dell-smm-hwmon
-- 
2.27.0