linux-kernel - [PATCH] habanalabs: increase h/w timer when checking idle

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <20200624094534.3549-1-oded.gabbay@gmail.com>
Date:   Wed, 24 Jun 2020 12:45:34 +0300
From:   Oded Gabbay <oded.gabbay@...il.com>
To:     linux-kernel@...r.kernel.org, SW_Drivers@...ana.ai
Cc:     gregkh@...uxfoundation.org, Omer Shpigelman <oshpigelman@...ana.ai>
Subject: [PATCH] habanalabs: increase h/w timer when checking idle

From: Omer Shpigelman <oshpigelman@...ana.ai>

In GAUDI the current timer value for the hardware to check if it is
in IDLE state is too low. As a result, there are occasions where the H/W
wrongly reports it is not IDLE. The driver checks that before submitting
work on behalf of the driver during initialization, so a false report might
cause the driver to fail during device initialization.

Signed-off-by: Omer Shpigelman <oshpigelman@...ana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@...il.com>
---
 drivers/misc/habanalabs/gaudi/gaudi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 69317d2ebdfa..834470d10b46 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -1893,6 +1893,8 @@ static void gaudi_init_pci_dma_qman(struct hl_device *hdev, int dma_id,
 	WREG32(mmDMA0_QM_CP_MSG_BASE3_ADDR_LO_0 + q_off, so_base_ws_lo);
 	WREG32(mmDMA0_QM_CP_MSG_BASE3_ADDR_HI_0 + q_off, so_base_ws_hi);
 
+	WREG32(mmDMA0_QM_CP_BARRIER_CFG_0 + q_off, 0x100);
+
 	/* The following configuration is needed only once per QMAN */
 	if (qman_id == 0) {
 		/* Configure RAZWI IRQ */
-- 
2.17.1