| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1592963601.3278.1.camel@mtkswgap22>
Date: Wed, 24 Jun 2020 09:53:21 +0800
From: Stanley Chu <stanley.chu@...iatek.com>
To: Steev Klimaszewski <steev@...i.org>
CC: Kyuho Choi <chlrbgh0@...il.com>, Avri Altman <Avri.Altman@....com>,
"Rob Clark" <robdclark@...il.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Asutosh Das <asutoshd@...eaurora.org>,
"cang@...eaurora.org" <cang@...eaurora.org>,
"martin.petersen@...cle.com" <martin.petersen@...cle.com>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Subhash Jadavani <subhashj@...eaurora.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
Bean Huo <beanhuo@...ron.com>,
"Tomas Winkler" <tomas.winkler@...el.com>,
Colin Ian King <colin.king@...onical.com>,
Bart Van Assche <bvanassche@....org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v1 1/3] scsi: ufs: add write booster feature support
Hi Steev,
On Tue, 2020-06-23 at 20:10 -0500, Steev Klimaszewski wrote:
> On 6/23/20 1:51 AM, Kyuho Choi wrote:
> > Hi Avri,
> >
> > On 6/23/20, Avri Altman <Avri.Altman@....com> wrote:
> >>> AFAIK, this device are ufs 2.1. It's not support writebooster.
> >>>
> >>> I'd check latest linux scsi branch and ufshcd_wb_config function's
> >>> called without device capability check.
> >> Please grep ufshcd_wb_probe.
> >>
> > I got your point, but as I mentioned, this device not support wb, this
> > is old products.
> >
> > I'm not sure ufshcd_wb_probe are called or not in Rob and Steev's platform.
> > If it's called, hba->caps are setted with wb diable and this error not occured.
> > But (it looks) not called, same query error will be occured in
> > ufshcd_wb_config/ctrl.
> >
> > BR,
> > Kyuho Choi
>
> I do show ufshcd_wb_probe in my sources - I'm based on 5.8-rc2 with a
> few extra patches for the c630, and the inline encryption patches.
>
> I this is the output that I see -
>
> 1.
> [ 0.702501] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg:
> Unable to find vdd-hba-supply regulator, assuming enabled
> 2.
> [ 0.702506] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg:
> Unable to find vccq-supply regulator, assuming enabled
> 3.
> [ 0.702508] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg:
> Unable to find vccq2-supply regulator, assuming enabled
> 4.
> [ 0.703296] ufshcd-qcom 1d84000.ufshc: Found QC Inline Crypto
> Engine (ICE) v3.1.75
> 5.
> [ 0.705121] scsi host0: ufshcd
> 6.
> [ 0.720163] ALSA device list:
> 7.
> [ 0.720171] No soundcards found.
> 8.
> [ 0.731393] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
> TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE],
> rate = 0
> 9.
> [ 0.893738] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
> TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
> 10.
> [ 0.894703] ufshcd-qcom 1d84000.ufshc:
> ufshcd_find_max_sup_active_icc_level: Regulator capability was not
> set, actvIccLevel=0
> 11.
> [ 0.896032] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
> flag query for idn 14 failed, err = 253
> 12.
> [ 0.896919] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
> flag query for idn 14 failed, err = 253
> 13.
> [ 0.897798] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
> flag query for idn 14 failed, err = 253
> 14.
> [ 0.898227] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag_retry:
> query attribute, opcode 6, idn 14, failed with error 253 after 3 retires
> 15.
> [ 0.898798] ufshcd-qcom 1d84000.ufshc: ufshcd_wb_ctrl write
> booster enable failed 253
> 16.
> [ 0.899150] ufshcd-qcom 1d84000.ufshc: ufshcd_wb_config: Enable
> WB failed: 253
> 17.
> [ 0.899918] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
> flag query for idn 16 failed, err = 253
> 18.
> [ 0.900448] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
> flag query for idn 16 failed, err = 253
> 19.
> [ 0.901290] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
> flag query for idn 16 failed, err = 253
> 20.
> [ 0.901749] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag_retry:
> query attribute, opcode 6, idn 16, failed with error 253 after 3 retires
> 21.
> [ 0.902285] ufshcd-qcom 1d84000.ufshc: ufshcd_wb_config: En WB
> flush during H8: failed: 253
> 22.
> [ 0.903105] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
> flag query for idn 15 failed, err = 253
> 23.
> [ 0.903988] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
> flag query for idn 15 failed, err = 253
> 24.
> [ 0.904866] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
> flag query for idn 15 failed, err = 253
> 25.
> [ 0.905294] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag_retry:
> query attribute, opcode 6, idn 15, failed with error 253 after 3 retires
> 26.
> [ 0.905859] ufshcd-qcom 1d84000.ufshc: ufshcd_wb_buf_flush_enable
> WB - buf flush enable failed 253
Please help try below simple patch to see if above WriteBooster messages
can be eliminated.
---
drivers/scsi/ufs/ufshcd.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index f173ad1bd79f..089c0785f0b3 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6985,6 +6985,8 @@ static int ufs_get_device_desc(struct ufs_hba
*hba)
dev_info->wspecversion == 0x220 ||
(hba->dev_quirks & UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES))
ufshcd_wb_probe(hba, desc_buf);
+ else
+ hba->caps &= ~UFSHCD_CAP_WB_EN;
/*
* ufshcd_read_string_desc returns size of the string
--
> 27.
> [ 0.907659] scsi 0:0:0:49488: Well-known LUN SAMSUNG
> KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
> 28.
> [ 0.911082] scsi 0:0:0:49476: Well-known LUN SAMSUNG
> KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
> 29.
> [ 0.913268] scsi 0:0:0:49456: Well-known LUN SAMSUNG
> KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
> 30.
> [ 0.914580] scsi 0:0:0:0: Direct-Access SAMSUNG
> KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
> 31.
> [ 0.915156] sd 0:0:0:0: Power-on or device reset occurred
> 32.
> [ 0.915311] scsi 0:0:0:1: Direct-Access SAMSUNG
> KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
> 33.
> [ 0.916104] scsi 0:0:0:2: Direct-Access SAMSUNG
> KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
> 34.
> [ 0.916318] sd 0:0:0:0: [sda] 29765632 4096-byte logical blocks:
> (122 GB/114 GiB)
> 35.
> [ 0.916417] sd 0:0:0:0: [sda] Write Protect is off
> 36.
> [ 0.916424] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
> 37.
> [ 0.916589] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, supports DPO and FUA
> 38.
> [ 0.916667] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
> 39.
> [ 0.916897] sd 0:0:0:1: Power-on or device reset occurred
> 40.
> [ 0.917131] scsi 0:0:0:3: Direct-Access SAMSUNG
> KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
> 41.
> [ 0.917498] sd 0:0:0:2: Power-on or device reset occurred
> 42.
> [ 0.917994] sd 0:0:0:3: Power-on or device reset occurred
> 43.
> [ 0.919301] scsi 0:0:0:4: Direct-Access SAMSUNG
> KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
> 44.
> [ 0.920207] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks:
> (4.19 MB/4.00 MiB)
> 45.
> [ 0.920310] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks:
> (134 MB/128 MiB)
> 46.
> [ 0.920312] sd 0:0:0:2: [sdc] Write Protect is off
> 47.
> [ 0.920317] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
> 48.
> [ 0.920405] sd 0:0:0:3: [sdd] Write Protect is off
> 49.
> [ 0.920410] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
> 50.
> [ 0.920642] sd 0:0:0:2: [sdc] Write cache: enabled, read cache:
> enabled, supports DPO and FUA
> 51.
> [ 0.921151] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
> 52.
> [ 0.921212] sd 0:0:0:3: [sdd] Write cache: enabled, read cache:
> enabled, supports DPO and FUA
> 53.
> [ 0.921526] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
> 54.
> [ 0.922585] sd 0:0:0:4: Power-on or device reset occurred
> 55.
> [ 0.922983] scsi 0:0:0:5: Direct-Access SAMSUNG
> KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
> 56.
> [ 0.923490] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks:
> (4.19 MB/4.00 MiB)
> 57.
> [ 0.928867] sd 0:0:0:1: [sdb] Write Protect is off
> 58.
> [ 0.928870] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
> 59.
> [ 0.930887] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks:
> (4.29 GB/4.00 GiB)
> 60.
> [ 0.931179] sd 0:0:0:1: [sdb] Write cache: enabled, read cache:
> enabled, supports DPO and FUA
> 61.
> [ 0.932015] random: fast init done
> 62.
> [ 0.932022] sd 0:0:0:5: Power-on or device reset occurred
> 63.
> [ 0.935289] sd 0:0:0:4: [sde] Write Protect is off
> 64.
> [ 0.935293] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
> 65.
> [ 0.935396] sda: sda1 sda2 sda3 sda4 sda5
> 66.
> [ 0.936047] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
> 67.
> [ 0.936358] sd 0:0:0:4: [sde] Write cache: enabled, read cache:
> enabled, supports DPO and FUA
> 68.
> [ 0.936865] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes
> 69.
> [ 0.938448] sdc: sdc1 sdc2
> 70.
> [ 0.939470] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks:
> (1.61 GB/1.50 GiB)
> 71.
> [ 0.939743] sd 0:0:0:5: [sdf] Write Protect is off
> 72.
> [ 0.939747] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
> 73.
> [ 0.940609] sd 0:0:0:5: [sdf] Write cache: enabled, read cache:
> enabled, supports DPO and FUA
> 74.
> [ 0.940837] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes
> 75.
> [ 0.940984] sd 0:0:0:0: [sda] Attached SCSI disk
> 76.
> [ 0.941150] sd 0:0:0:2: [sdc] Attached SCSI disk
> 77.
> [ 0.945814] sdd: sdd2 sdd3
> 78.
> [ 0.945983] sdf: sdf2 sdf3 sdf4 sdf5
> 79.
> [ 0.946701] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9
> sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20
> sde21 sde22 sde23 sde24 sde25 sde26 sde27
> 80.
> [ 0.953610] sdb: sdb1 sdb2
> 81.
> [ 0.954035] sd 0:0:0:5: [sdf] Attached SCSI disk
> 82.
> [ 0.954131] sd 0:0:0:4: [sde] Attached SCSI disk
> 83.
> [ 0.954177] sd 0:0:0:3: [sdd] Attached SCSI disk
> 84.
> [ 0.955316] sd 0:0:0:1: [sdb] Attached SCSI disk
>
> Full dmesg output at https://pastebin.com/azWahunu
>
>
> -- Steev
>
Powered by blists - more mailing lists