| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 24 Jun 2020 08:36:11 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: alexandru.tachici@...log.com, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Cc: robh+dt@...nel.org
Subject: Re: [PATCH v5 4/7] hwmon: pmbus: adm1266: Add ioctl commands
On 6/24/20 8:17 AM, alexandru.tachici@...log.com wrote:
> From: Alexandru Tachici <alexandru.tachici@...log.com>
>
> Add two ioctl commands for reading the current state
> of the adm1266 sequencer and sending commands.
>
Please note that I am not going to a accept any ioctls for hwmon drivers,
much less unprivileged commands like this.
Guenter
> Signed-off-by: Alexandru Tachici <alexandru.tachici@...log.com>
> ---
> Documentation/hwmon/adm1266.rst | 15 +++
> .../userspace-api/ioctl/ioctl-number.rst | 1 +
> drivers/hwmon/pmbus/adm1266.c | 97 +++++++++++++++++++
> include/uapi/linux/adm1266.h | 16 +++
> 4 files changed, 129 insertions(+)
> create mode 100644 include/uapi/linux/adm1266.h
>
> diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst
> index 65662115750c..5dc05808db60 100644
> --- a/Documentation/hwmon/adm1266.rst
> +++ b/Documentation/hwmon/adm1266.rst
> @@ -33,3 +33,18 @@ inX_min Minimum Voltage.
> inX_max Maximum voltage.
> inX_min_alarm Voltage low alarm.
> inX_max_alarm Voltage high alarm.
> +
> +
> +User API
> +========
> +
> +ioctls
> +------
> +
> +ADM1266_SET_GO_COMMAND:
> +
> + Issue a GO_COMMAND to the device.
> +
> +ADM1266_GET_STATUS:
> +
> + Returns state of the sequencer.
> diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
> index 59472cd6a11d..df92ca274622 100644
> --- a/Documentation/userspace-api/ioctl/ioctl-number.rst
> +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
> @@ -348,6 +348,7 @@ Code Seq# Include File Comments
> 0xCC 00-0F drivers/misc/ibmvmc.h pseries VMC driver
> 0xCD 01 linux/reiserfs_fs.h
> 0xCF 02 fs/cifs/ioctl.c
> +0xD1 00-0F linux/adm1266.h
> 0xDB 00-0F drivers/char/mwave/mwavepub.h
> 0xDD 00-3F ZFCP device driver see drivers/s390/scsi/
> <mailto:aherrman@...ibm.com>
> diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
> index 76bf2c78e737..0960ead8d96a 100644
> --- a/drivers/hwmon/pmbus/adm1266.c
> +++ b/drivers/hwmon/pmbus/adm1266.c
> @@ -15,11 +15,16 @@
> #include <linux/init.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> +#include <linux/proc_fs.h>
> #include <linux/slab.h>
> +#include <linux/uaccess.h>
>
> +#include <linux/adm1266.h>
> #include "pmbus.h"
>
> #define ADM1266_PDIO_CONFIG 0xD4
> +#define ADM1266_GO_COMMAND 0xD8
> +#define ADM1266_READ_STATE 0xD9
> #define ADM1266_GPIO_CONFIG 0xE1
> #define ADM1266_PDIO_STATUS 0xE9
> #define ADM1266_GPIO_STATUS 0xEA
> @@ -46,6 +51,7 @@ struct adm1266_data {
> struct gpio_chip gc;
> const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
> struct i2c_client *client;
> + struct mutex ioctl_mutex; /* lock ioctl access */
> };
>
> /* Different from Block Read as it sends data and waits for the slave to
> @@ -311,6 +317,93 @@ static int adm1266_config_gpio(struct adm1266_data *data)
> }
> #endif
>
> +static int adm1266_set_go_command_op(struct adm1266_data *data, u8 val)
> +{
> + val = FIELD_GET(GENMASK(4, 0), val);
> +
> + return i2c_smbus_write_word_data(data->client, ADM1266_GO_COMMAND, val);
> +}
> +
> +static int adm1266_ioctl_unlocked(struct file *fp, unsigned int cmd,
> + unsigned long arg)
> +{
> + int __user *argp = (int __user *)arg;
> + struct adm1266_data *data;
> + int val;
> + int ret;
> +
> + data = fp->private_data;
> +
> + if (!argp)
> + return -EINVAL;
> +
> + switch (cmd) {
> + case ADM1266_SET_GO_COMMAND:
> + if (copy_from_user(&val, argp, sizeof(int)))
> + return -EFAULT;
> +
> + return adm1266_set_go_command_op(data, val);
> + case ADM1266_GET_STATUS:
> + ret = i2c_smbus_read_word_data(data->client,
> + ADM1266_READ_STATE);
> +
> + if (ret < 0)
> + return ret;
> +
> + if (copy_to_user(argp, &ret, sizeof(int)))
> + return -EFAULT;
> +
> + break;
> + default:
> + return -ENOTTY;
> + }
> +
> + return 0;
> +}
> +
> +static long adm1266_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
> +{
> + struct adm1266_data *data;
> + long ret;
> +
> + data = fp->private_data;
> +
> + mutex_lock(&data->ioctl_mutex);
> + ret = adm1266_ioctl_unlocked(fp, cmd, arg);
> + mutex_unlock(&data->ioctl_mutex);
> +
> + return ret;
> +}
> +
> +static int adm1266_open(struct inode *inode, struct file *filp)
> +{
> + filp->private_data = PDE_DATA(inode);
> +
> + return 0;
> +}
> +
> +static const struct proc_ops adm1266_proc_ops = {
> + .proc_open = adm1266_open,
> + .proc_ioctl = adm1266_ioctl,
> +};
> +
> +static int adm1266_init_procfs(struct adm1266_data *data)
> +{
> + struct proc_dir_entry *proc_dir;
> + u8 proc_fs_name[32];
> +
> + mutex_init(&data->ioctl_mutex);
> +
> + snprintf(proc_fs_name, 32, "adm1266-%x", data->client->addr);
> + proc_dir = proc_create_data(proc_fs_name, 0, NULL, &adm1266_proc_ops,
> + data);
> +
> + if (!proc_dir)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> static int adm1266_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -333,6 +426,10 @@ static int adm1266_probe(struct i2c_client *client,
>
> crc8_populate_msb(pmbus_crc_table, 0x7);
>
> + ret = adm1266_init_procfs(data);
> + if (ret < 0)
> + return ret;
> +
> info = &data->info;
> info->pages = 17;
> info->format[PSC_VOLTAGE_OUT] = linear;
> diff --git a/include/uapi/linux/adm1266.h b/include/uapi/linux/adm1266.h
> new file mode 100644
> index 000000000000..535d270ee8c5
> --- /dev/null
> +++ b/include/uapi/linux/adm1266.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +/*
> + * ADM1266 - Cascadable Super Sequencer with Margin
> + * Control and Fault Recording
> + *
> + * Copyright 2020 Analog Devices Inc.
> + */
> +
> +#ifndef _LINUX_ADM1266_H
> +#define _LINUX_ADM1266_H
> +
> +/* ADM1266 ioctl commands */
> +#define ADM1266_SET_GO_COMMAND _IOW(0xD1, 0x00, int)
> +#define ADM1266_GET_STATUS _IOR(0xD1, 0x01, int)
> +
> +#endif
>
Powered by blists - more mailing lists