linux-kernel - [PATCH v5 6/9] clocksource/drivers/timer-atmel-tcb: fill tcb

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200625214312.1382063-7-alexandre.belloni@bootlin.com>
Date:   Thu, 25 Jun 2020 23:43:09 +0200
From:   Alexandre Belloni <alexandre.belloni@...tlin.com>
To:     Daniel Lezcano <daniel.lezcano@...aro.org>
Cc:     Thomas Gleixner <tglx@...utronix.de>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
        kamel.bouhara@...tlin.com, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org,
        Alexandre Belloni <alexandre.belloni@...tlin.com>
Subject: [PATCH v5 6/9] clocksource/drivers/timer-atmel-tcb: fill tcb_config

Use the tcb_config and struct atmel_tcb_config to get the timer counter
width. This is necessary because atmel_tcb_config will be extended later
on.

Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
---
 drivers/clocksource/timer-atmel-tcb.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c
index b255a4a1a36b..423af2f9835f 100644
--- a/drivers/clocksource/timer-atmel-tcb.c
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -348,9 +348,17 @@ static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_id
 
 static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128 };
 
+static struct atmel_tcb_config tcb_rm9200_config = {
+	.counter_width = 16,
+};
+
+static struct atmel_tcb_config tcb_sam9x5_config = {
+	.counter_width = 32,
+};
+
 static const struct of_device_id atmel_tcb_of_match[] = {
-	{ .compatible = "atmel,at91rm9200-tcb", .data = (void *)16, },
-	{ .compatible = "atmel,at91sam9x5-tcb", .data = (void *)32, },
+	{ .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
+	{ .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
 	{ /* sentinel */ }
 };
 
@@ -398,7 +406,11 @@ static int __init tcb_clksrc_init(struct device_node *node)
 	}
 
 	match = of_match_node(atmel_tcb_of_match, node->parent);
-	bits = (uintptr_t)match->data;
+	if (!match)
+		return -ENODEV;
+
+	tc.tcb_config = match->data;
+	bits = tc.tcb_config->counter_width;
 
 	for (i = 0; i < ARRAY_SIZE(tc.irq); i++)
 		writel(ATMEL_TC_ALL_IRQ, tc.regs + ATMEL_TC_REG(i, IDR));
-- 
2.26.2