linux-kernel - [PATCH] tty: serial: fsl_lpuart: minimum baud rate support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1593078545-11272-1-git-send-email-vabhav.sharma@oss.nxp.com>
Date:   Thu, 25 Jun 2020 15:19:05 +0530
From:   Vabhav Sharma <vabhav.sharma@....nxp.com>
To:     gregkh@...uxfoundation.org, jslaby@...e.com,
        linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     v.sethi@....com, Vabhav Sharma <vabhav.sharma@....com>
Subject: [PATCH] tty: serial: fsl_lpuart: minimum baud rate support

From: Vabhav Sharma <vabhav.sharma@....com>

The formula for the baud rate is
baud rate = "baud clock / ((OSR+1) × SBR)

Algorithm used in function lpuart32_serial_setbrg() only changes
the SBR. Even with maxmum value put in, OSR stays at 0x7 and the
lowest baud rate would be ~ 2600 bps

Update the algorithm to allow driver operation at 1200,2400 or
600 bps

Signed-off-by: Vabhav Sharma <vabhav.sharma@....com>
---
 drivers/tty/serial/fsl_lpuart.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 90298c4..0fd0fa5f 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1925,6 +1925,10 @@ static void __lpuart32_serial_setbrg(struct uart_port *port,
 			tmp_sbr++;
 		}
 
+		if (tmp_sbr > UARTBAUD_SBR_MASK) {
+			continue;
+		}
+
 		if (tmp_diff <= baud_diff) {
 			baud_diff = tmp_diff;
 			osr = tmp_osr;
-- 
2.7.4