[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200626224344.GA1992137@bjorn-Precision-5520>
Date: Fri, 26 Jun 2020 17:43:44 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Mika Westerberg <mika.westerberg@...ux.intel.com>
Cc: Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H . Peter Anvin" <hpa@...or.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Borislav Petkov <bp@...en8.de>, x86@...nel.org,
Benoit Grégoire <benoitg@...us.ca>,
juhapekka.heikkila@...il.com, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] x86/resource: Do not exclude regions that are marked as
MMIO in EFI memmap
On Mon, Mar 02, 2020 at 05:14:51PM +0300, Mika Westerberg wrote:
> Commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address
> space") made the resource allocation code to avoid all regions that are
> in E820 table. This prevents the kernel to assign MMIO resources to
> regions that may be real RAM for example.
>
> However, at least with Lenovo Yoca C940 and S740 this causes problems
> when allocating resources for PCIe devices behind Thunderbolt port(s).
>
> On Yoga S740 the E820 table contains an entry like this:
>
> BIOS-e820: [mem 0x000000002bc50000-0x00000000cfffffff] reserved
>
> and ACPI _CRS method for the host bridge returns these windows:
>
> pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
> pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
> pci_bus 0000:00: root bus resource [mem 0x45400000-0xbfffffff window]
> pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
>
> Note that the 0x45400000-0xbfffffff entry is also included in the E820
> table and marked as "reserved".
>
> When Thunderbolt device is connected and the PCIe gets tunneled PCI core
> tries to allocate memory for the new devices but it fails because all
> the resources are inside this reserved region so arch_remove_reservations()
> clips them which makes the resource assignment fail as in below log:
>
> pci 0000:00:07.0: PCI bridge to [bus 01-2a]
> pci 0000:00:07.0: bridge window [mem 0x46000000-0x521fffff]
> pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
> ...
> pci 0000:02:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 07-2a] add_size 100000 add_align 100000
> pci 0000:02:04.0: bridge window [mem 0x00100000-0x001fffff] to [bus 07-2a] add_size 100000 add_align 100000
> pci 0000:01:00.0: bridge window [mem 0x00100000-0x005fffff 64bit pref] to [bus 02-2a] add_size 100000 add_align 100000
> pci 0000:01:00.0: bridge window [mem 0x00100000-0x005fffff] to [bus 02-2a] add_size 100000 add_align 100000
> pci 0000:01:00.0: bridge window [io 0x1000-0x5fff] shrunken by 0x0000000000004000
> pci 0000:01:00.0: bridge window [mem 0x00100000-0x005fffff] extended by 0x000000000bd00000
> pci 0000:01:00.0: bridge window [mem 0x00100000-0x005fffff 64bit pref] extended by 0x000000001bb00000
> pci 0000:02:04.0: bridge window [mem 0x00100000-0x001fffff] extended by 0x000000000bd00000
> pci 0000:02:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] extended by 0x000000001bb00000
> pci 0000:01:00.0: BAR 8: no space for [mem size 0x0c200000]
> pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x0c200000]
> pci 0000:01:00.0: BAR 9: assigned [mem 0x6000000000-0x601bffffff 64bit pref]
> pci 0000:01:00.0: BAR 7: assigned [io 0x4000-0x4fff]
>
> The 01:00.0 is the upstream port of the PCIe switch that is connected to
> the PCIe root port (00:07.1) over Thunderbolt link.
>
> If I add "efi=debug" to the command line I can see that the EFI memory
> map actually contains several entries:
>
> [Reserved | | | | | | | | | |WB|WT|WC|UC] range=[0x000000002bc50000-0x000000003fffffff] (323MB)
> [Reserved | | | | | | | | | |WB| | |UC] range=[0x0000000040000000-0x0000000040ffffff] (16MB)
> [Reserved | | | | | | | | | | | | | ] range=[0x0000000041000000-0x00000000453fffff] (68MB)
> [Memory Mapped I/O |RUN| | | | | | | | | | | |UC] range=[0x0000000045400000-0x00000000cfffffff] (2220MB)
>
> I think the EFI stub merges these consecutive entries into that single
> E820 entry showed above. The last region marked as EFI_MEMORY_MAPPED_IO
> actually covers the PCI host bridge window entirely. However, since
> there is corresponding E820 type for this it is simply marked as
> E820_TYPE_RESERVED.
Is this supposed to say "since there is *no* corresponding E820 type"?
I guess this refers to setup_e820()? I see the switch case there that
sets e820_type to E820_TYPE_RESERVED for EFI_MEMORY_MAPPED_IO.
I'm really not familiar with the EFI stub, but I guess that when
booting with EFI, we basically build our own E820 table based on the
EFI memory map, then use that constructed E820 table to initialize
iomem_resource via e820__reserve_resources()?
I wonder why we don't just use the EFI memory map to initialize
iomem_resource directly. It seems like the EFI map -> E820 table ->
iomem_resource path adds complication that makes issues like this more
likely.
IIUC, this patch allows Linux to use EFI_MEMORY_MAPPED_IO for PCI MMIO
space, i.e., if "avail" is in a EFI_MEMORY_MAPPED_IO region, we don't
need to consider it "reserved" and we can put PCI resources there.
UEFI v2.8, Table 30 (doc p 160, PDF p 233) says about
EfiMemoryMappedIO that
before ExitBootServices():
Used by system firmware to request that a memory-mapped IO region
be mapped by the OS to a virtual address so it can be accessed by
EFI runtime services.
after ExitBootServices():
This memory is not used by the OS. All system memory-mapped IO
information should come from ACPI tables.
I would read that as basically saying that the OS must virtually map
EfiMemoryMappedIO for use by EFI runtime services (I don't know if
Linux uses any of those).
The "after ExitBootServices()" part doesn't seem very clear to me.
"This memory is not used by the OS" isn't quite stated as a
requirement for the OS. And "All .. MMIO information should come from
ACPI tables" sounds like the OS should *ignore* this EFI map in favor
of ACPI.
So I don't know how to fix this. I just feel like this patch adds
complication to an already very messy flow. We may have to do that,
but it always makes me sad ;)
> All in all, I think we can fix this by modifying arch_remove_reservations()
> to check the EFI type as well and if it is EFI_MEMORY_MAPPED_IO skip the
> clipping in that case.
>
> Reported-by: Benoit Grégoire <benoitg@...us.ca>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=206459
> Signed-off-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
> ---
> arch/x86/kernel/resource.c | 34 +++++++++++++++++++++++++++++++++-
> 1 file changed, 33 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
> index 9b9fb7882c20..c0bc9117dd7d 100644
> --- a/arch/x86/kernel/resource.c
> +++ b/arch/x86/kernel/resource.c
> @@ -1,4 +1,5 @@
> // SPDX-License-Identifier: GPL-2.0
> +#include <linux/efi.h>
> #include <linux/ioport.h>
> #include <asm/e820/api.h>
>
> @@ -36,6 +37,36 @@ static void remove_e820_regions(struct resource *avail)
> }
> }
>
> +#ifdef CONFIG_EFI
> +static bool efi_mmio_mem(const struct resource *avail)
> +{
> + resource_size_t start, end;
> + efi_memory_desc_t desc;
> +
> + if (!efi_enabled(EFI_MEMMAP) ||
> + efi_mem_desc_lookup(avail->start, &desc))
> + return false;
> +
> + start = desc.phys_addr;
> + end = desc.phys_addr + (desc.num_pages << EFI_PAGE_SHIFT) - 1;
> +
> + /*
> + * No need to clip the resource if it is fully contained in an
> + * EFI memory mapped region.
> + */
> + if (avail->start >= start && avail->end <= end &&
> + desc.type == EFI_MEMORY_MAPPED_IO)
> + return true;
> +
> + return false;
> +}
> +#else
> +static inline bool efi_mmio_mem(const struct resource *avail)
> +{
> + return false;
> +}
> +#endif
> +
> void arch_remove_reservations(struct resource *avail)
> {
> /*
> @@ -46,6 +77,7 @@ void arch_remove_reservations(struct resource *avail)
> if (avail->flags & IORESOURCE_MEM) {
> resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
>
> - remove_e820_regions(avail);
> + if (!efi_mmio_mem(avail))
> + remove_e820_regions(avail);
> }
> }
> --
> 2.25.0
>
Powered by blists - more mailing lists