| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 26 Jun 2020 16:04:59 +0200
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To: unlisted-recipients:; (no To-header on input)
Cc: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
linux-media@...r.kernel.org, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 7/7] media: atomisp: place all gpio parsing together
Instead of parsing GPIO for two exceptions inside the logic
which would be trying to use the GPIO, move the init code
to the routine which adds a new gmin device.
Move the notes to it too, as this helps to identify where
those two GPIO settings are used, explaining why they're
defaulting to -1 when not found.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
---
.../media/atomisp/pci/atomisp_gmin_platform.c | 86 +++++++++----------
1 file changed, 40 insertions(+), 46 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
index 3136759bf96f..1a1a6a9ee8a3 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
@@ -83,6 +83,9 @@ struct gmin_subdev {
bool v1p2_on;
bool v2p8_vcm_on;
+ int v1p8_gpio;
+ int v2p8_gpio;
+
u8 pwm_i2c_addr;
/* For PMIC AXP */
@@ -122,24 +125,6 @@ static const struct atomisp_platform_data pdata = {
.subdevs = pdata_subdevs,
};
-/*
- * Something of a hack. The ECS E7 board drives camera 2.8v from an
- * external regulator instead of the PMIC. There's a gmin_CamV2P8
- * config variable that specifies the GPIO to handle this particular
- * case, but this needs a broader architecture for handling camera
- * power.
- */
-enum { V2P8_GPIO_UNSET = -2, V2P8_GPIO_NONE = -1 };
-static int v2p8_gpio = V2P8_GPIO_UNSET;
-
-/*
- * Something of a hack. The CHT RVP board drives camera 1.8v from an
- * external regulator instead of the PMIC just like ECS E7 board, see the
- * comments above.
- */
-enum { V1P8_GPIO_UNSET = -2, V1P8_GPIO_NONE = -1 };
-static int v1p8_gpio = V1P8_GPIO_UNSET;
-
static LIST_HEAD(vcm_devices);
static DEFINE_MUTEX(vcm_lock);
@@ -561,6 +546,23 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev)
else
dev_info(dev, "will handle gpio1 via ACPI\n");
+ /*
+ * Those are used only when there is an external regulator apart
+ * from the PMIC that would be providing power supply, like on the
+ * two cases below:
+ *
+ * The ECS E7 board drives camera 2.8v from an external regulator
+ * instead of the PMIC. There's a gmin_CamV2P8 config variable
+ * that specifies the GPIO to handle this particular case,
+ * but this needs a broader architecture for handling camera power.
+ *
+ * The CHT RVP board drives camera 1.8v from an* external regulator
+ * instead of the PMIC just like ECS E7 board.
+ */
+
+ gs->v1p8_gpio = gmin_get_var_int(dev, true, "V1P8GPIO", -1);
+ gs->v2p8_gpio = gmin_get_var_int(dev, true, "V2P8GPIO", -1);
+
/*
* FIXME:
*
@@ -843,26 +845,22 @@ static int gmin_v1p8_ctrl(struct v4l2_subdev *subdev, int on)
dev = &client->dev;
- if (v1p8_gpio == V1P8_GPIO_UNSET) {
- v1p8_gpio = gmin_get_var_int(dev, true,
- "V1P8GPIO", V1P8_GPIO_NONE);
- if (v1p8_gpio != V1P8_GPIO_NONE) {
- pr_info("atomisp_gmin_platform: 1.8v power on GPIO %d\n",
- v1p8_gpio);
- ret = gpio_request(v1p8_gpio, "camera_v1p8_en");
- if (!ret)
- ret = gpio_direction_output(v1p8_gpio, 0);
- if (ret)
- pr_err("V1P8 GPIO initialization failed\n");
- }
+ if (gs->v1p8_gpio >= 0) {
+ pr_info("atomisp_gmin_platform: 1.8v power on GPIO %d\n",
+ gs->v1p8_gpio);
+ ret = gpio_request(gs->v1p8_gpio, "camera_v1p8_en");
+ if (!ret)
+ ret = gpio_direction_output(gs->v1p8_gpio, 0);
+ if (ret)
+ pr_err("V1P8 GPIO initialization failed\n");
}
if (!gs || gs->v1p8_on == on)
return 0;
gs->v1p8_on = on;
- if (v1p8_gpio >= 0)
- gpio_set_value(v1p8_gpio, on);
+ if (gs->v1p8_gpio >= 0)
+ gpio_set_value(gs->v1p8_gpio, on);
if (gs->v1p8_reg) {
regulator_set_voltage(gs->v1p8_reg, 1800000, 1800000);
@@ -905,26 +903,22 @@ static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int on)
dev = &client->dev;
- if (v2p8_gpio == V2P8_GPIO_UNSET) {
- v2p8_gpio = gmin_get_var_int(dev, true,
- "V2P8GPIO", V2P8_GPIO_NONE);
- if (v2p8_gpio != V2P8_GPIO_NONE) {
- pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n",
- v2p8_gpio);
- ret = gpio_request(v2p8_gpio, "camera_v2p8");
- if (!ret)
- ret = gpio_direction_output(v2p8_gpio, 0);
- if (ret)
- pr_err("V2P8 GPIO initialization failed\n");
- }
+ if (gs->v2p8_gpio >= 0) {
+ pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n",
+ gs->v2p8_gpio);
+ ret = gpio_request(gs->v2p8_gpio, "camera_v2p8");
+ if (!ret)
+ ret = gpio_direction_output(gs->v2p8_gpio, 0);
+ if (ret)
+ pr_err("V2P8 GPIO initialization failed\n");
}
if (!gs || gs->v2p8_on == on)
return 0;
gs->v2p8_on = on;
- if (v2p8_gpio >= 0)
- gpio_set_value(v2p8_gpio, on);
+ if (gs->v2p8_gpio >= 0)
+ gpio_set_value(gs->v2p8_gpio, on);
if (gs->v2p8_reg) {
regulator_set_voltage(gs->v2p8_reg, 2900000, 2900000);
--
2.26.2
Powered by blists - more mailing lists