| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200628073908.GA8343@dragon>
Date: Sun, 28 Jun 2020 15:39:10 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: Konrad Dybcio <konradybcio@...il.com>
Cc: skrzynka@...radybcio.pl, Amit Kucheria <amit.kucheria@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Rob Herring <robh+dt@...nel.org>, linux-pm@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] thermal: qcom: tsens-v0_1: Add support for MSM8939
On Fri, May 01, 2020 at 10:33:10PM +0200, Konrad Dybcio wrote:
> Signed-off-by: Konrad Dybcio <konradybcio@...il.com>
For the record, I'm working my version of msm8939 tsens driver support,
and I would highlight the things that differ from this patch.
> ---
> drivers/thermal/qcom/tsens-v0_1.c | 142 +++++++++++++++++++++++++++++-
> drivers/thermal/qcom/tsens.c | 3 +
> drivers/thermal/qcom/tsens.h | 2 +-
> 3 files changed, 145 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
> index 959a9371d205c..29b95886273b7 100644
> --- a/drivers/thermal/qcom/tsens-v0_1.c
> +++ b/drivers/thermal/qcom/tsens-v0_1.c
> @@ -48,6 +48,64 @@
> #define MSM8916_CAL_SEL_MASK 0xe0000000
> #define MSM8916_CAL_SEL_SHIFT 29
>
> +/* eeprom layout data for 8939 */
> +#define MSM8939_BASE0_MASK 0x000000ff
Tabs rather than spaces are used for indentation.
> +#define MSM8939_BASE1_MASK 0xff000000
> +#define MSM8939_BASE0_SHIFT
This shift is 0.
> +#define MSM8939_BASE1_SHIFT 24
> +
> +#define MSM8939_S0_P1_MASK 0x000001f8
> +#define MSM8939_S1_P1_MASK 0x001f8000
> +#define MSM8939_S2_P1_MASK_0_4 0xf8000000
> +#define MSM8939_S2_P1_MASK_5 0x00000001
This mask define is contradicting to MSM8939_S2_P1_SHIFT_5, and needs to
be confirmed.
> +#define MSM8939_S3_P1_MASK 0x00001f80
> +#define MSM8939_S4_P1_MASK 0x01f80000
> +#define MSM8939_S5_P1_MASK 0x00003f00
> +#define MSM8939_S6_P1_MASK 0x03f00000
> +#define MSM8939_S7_P1_MASK 0x0000003f
> +#define MSM8939_S8_P1_MASK 0x0003f000
> +#define MSM8939_S9_P1_MASK 0x07e00000
> +
> +#define MSM8939_S0_P2_MASK 0x00007e00
> +#define MSM8939_S1_P2_MASK 0x07e00000
> +#define MSM8939_S2_P2_MASK 0x0000007e
> +#define MSM8939_S3_P2_MASK 0x0007e000
> +#define MSM8939_S4_P2_MASK 0x7e000000
> +#define MSM8939_S5_P2_MASK 0x000fc000
> +#define MSM8939_S6_P2_MASK 0xfc000000
> +#define MSM8939_S7_P2_MASK 0x00000fc0
> +#define MSM8939_S8_P2_MASK 0x00fc0000
> +#define MSM8939_S9_P2_MASK_0_4 0xf8000000
> +#define MSM8939_S9_P2_MASK_5 0x00002000
It's contradicting to MSM8939_S9_P2_SHIFT_5, and needs to be confirmed.
> +
> +#define MSM8939_CAL_SEL_MASK 0xc0000000
Per downstream kernel, this mask is 0x7.
https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/thermal/msm8974-tsens.c?h=LA.BR.1.2.9.1_rb1.5#n370
> +#define MSM8939_CAL_SEL_SHIFT 0
> +
> +
> +#define MSM8939_S0_P1_SHIFT 3
> +#define MSM8939_S1_P1_SHIFT 15
> +#define MSM8939_S2_P1_SHIFT_0_4 27
> +#define MSM8939_S2_P1_SHIFT_5 5
> +#define MSM8939_S3_P1_SHIFT 7
> +#define MSM8939_S4_P1_SHIFT 19
> +#define MSM8939_S5_P1_SHIFT 8
> +#define MSM8939_S6_P1_SHIFT 20
> +//yes, 7 is missing in downstream
The shift is not missing but just 0.
> +#define MSM8939_S8_P1_SHIFT 12
> +#define MSM8939_S9_P1_SHIFT 21
> +
> +#define MSM8939_S0_P2_SHIFT 9
> +#define MSM8939_S1_P2_SHIFT 21
> +#define MSM8939_S2_P2_SHIFT 1
> +#define MSM8939_S3_P2_SHIFT 13
> +#define MSM8939_S4_P2_SHIFT 25
> +#define MSM8939_S5_P2_SHIFT 14
> +#define MSM8939_S6_P2_SHIFT 26
> +#define MSM8939_S7_P2_SHIFT 6
> +#define MSM8939_S8_P2_SHIFT 18
> +#define MSM8939_S9_P2_SHIFT_0_4 27
> +#define MSM8939_S9_P2_SHIFT_5 8
> +
> /* eeprom layout data for 8974 */
> #define BASE1_MASK 0xff
> #define S0_P1_MASK 0x3f00
> @@ -189,6 +247,73 @@ static int calibrate_8916(struct tsens_priv *priv)
> return 0;
> }
>
> +static int calibrate_8939(struct tsens_priv *priv)
> +{
> + int base0 = 0, base1 = 0, i;
> + u32 p1[11], p2[11];
MSM8939 gets 10 sensors, so the arrays should be [10].
> + int mode = 0;
> + u32 *qfprom_cdata, *qfprom_csel;
> +
> + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
> + if (IS_ERR(qfprom_cdata))
> + return PTR_ERR(qfprom_cdata);
> +
> + qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
> + if (IS_ERR(qfprom_csel)) {
> + kfree(qfprom_cdata);
> + return PTR_ERR(qfprom_csel);
> + }
'calib_sel' is not separate from 'calib' bits on MSM8939. I chose to
read nvmem out as one go and map them to calibration data as below, per
downstream kernel.
/* Mapping between qfprom nvmem and calibration data */
cdata[0] = qfprom_cdata[12];
cdata[1] = qfprom_cdata[13];
cdata[2] = qfprom_cdata[0];
cdata[3] = qfprom_cdata[1];
cdata[4] = qfprom_cdata[22];
cdata[5] = qfprom_cdata[21];
mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/thermal/msm8974-tsens.c?h=LA.BR.1.2.9.1_rb1.5#n1286
We should support MSM8939 v3, as that's the mass production revision.
> +
> + mode = (qfprom_csel[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
> + dev_dbg(priv->dev, "calibration mode is %d\n", mode);
> + switch (mode) {
> + case TWO_PT_CALIB:
> + base1 = (qfprom_cdata[1] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
> + p2[0] = (qfprom_cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
> + p2[1] = (qfprom_cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
> + p2[2] = (qfprom_cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
> + p2[3] = (qfprom_cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
> + p2[4] = (qfprom_cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
> + p2[5] = (qfprom_cdata[1] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
> + p2[6] = (qfprom_cdata[1] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
> + p2[7] = (qfprom_cdata[1] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
> + p2[8] = (qfprom_cdata[1] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
> + p2[9] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
> + p2[10] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5;
These do not really match downstream kernel. My version look like:
base1 = (cdata[3] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
p2[0] = (cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
p2[1] = (cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
p2[2] = (cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
p2[3] = (cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
p2[4] = (cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
p2[5] = (cdata[2] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
p2[9] |= (cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5;
> + for (i = 0; i < priv->num_sensors; i++)
> + p2[i] = ((base1 + p2[i]) << 3);
The left shift should be 2 per downstream kernel.
https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/thermal/msm8974-tsens.c?h=LA.BR.1.2.9.1_rb1.5#n1407
> + /* Fall through */
> + case ONE_PT_CALIB2:
> + base0 = (qfprom_cdata[0] & MSM8939_BASE0_MASK);
> + p1[0] = (qfprom_cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
> + p1[1] = (qfprom_cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
> + p1[2] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
> + p1[3] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5;
> + p1[4] = (qfprom_cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
> + p1[5] = (qfprom_cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
> + p1[6] = (qfprom_cdata[1] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
> + p1[7] = (qfprom_cdata[1] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
> + //yes, 7 is missing in downstream
Not really.
https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/thermal/msm8974-tsens.c?h=LA.BR.1.2.9.1_rb1.5#n1331
> + p1[8] = (qfprom_cdata[1] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
> + p1[9] = (qfprom_cdata[1] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
> + for (i = 0; i < priv->num_sensors; i++)
> + p1[i] = (((base0) + p1[i]) << 3);
> + break;
> + default:
> + for (i = 0; i < priv->num_sensors; i++) {
> + p1[i] = 500;
> + p2[i] = 780;
> + }
> + break;
> + }
> +
> + compute_intercept_slope(priv, p1, p2, mode);
> + kfree(qfprom_cdata);
> + kfree(qfprom_csel);
> +
> + return 0;
> +}
> +
> static int calibrate_8974(struct tsens_priv *priv)
> {
> int base1 = 0, base2 = 0, i;
> @@ -325,7 +450,7 @@ static int calibrate_8974(struct tsens_priv *priv)
> return 0;
> }
>
> -/* v0.1: 8916, 8974 */
> +/* v0.1: 8916, 8939, 8974 */
>
> static struct tsens_features tsens_v0_1_feat = {
> .ver_major = VER_0_1,
> @@ -386,6 +511,21 @@ struct tsens_plat_data data_8916 = {
> .fields = tsens_v0_1_regfields,
> };
>
> +static const struct tsens_ops ops_8939 = {
> + .init = init_common,
> + .calibrate = calibrate_8939,
> + .get_temp = get_temp_common,
> +};
> +
> +struct tsens_plat_data data_8939 = {
> + .num_sensors = 10,
> + .ops = &ops_8939,
> + .hw_ids = (unsigned int []){0, 1, 2, 4, 5, 6, 7, 8, 9 },
Should be { 0, 1, 2, 4, 5, 6, 7, 8, 9, 10 }.
https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/arch/arm/boot/dts/qcom/msm8939-v3.0.dtsi?h=LA.BR.1.2.9.1_rb1.5#n670
Shawn
> +
> + .feat = &tsens_v0_1_feat,
> + .fields = tsens_v0_1_regfields,
> +};
> +
> static const struct tsens_ops ops_8974 = {
> .init = init_common,
> .calibrate = calibrate_8974,
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 2f77d235cf735..f654057e96ae1 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -59,6 +59,9 @@ static const struct of_device_id tsens_table[] = {
> {
> .compatible = "qcom,msm8916-tsens",
> .data = &data_8916,
> + }, {
> + .compatible = "qcom,msm8939-tsens",
> + .data = &data_8939,
> }, {
> .compatible = "qcom,msm8974-tsens",
> .data = &data_8974,
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index 502acf0e68285..403b15546f648 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -590,7 +590,7 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data);
> extern struct tsens_plat_data data_8960;
>
> /* TSENS v0.1 targets */
> -extern struct tsens_plat_data data_8916, data_8974;
> +extern struct tsens_plat_data data_8916, data_8939, data_8974;
>
> /* TSENS v1 targets */
> extern struct tsens_plat_data data_tsens_v1, data_8976;
> --
> 2.26.1
>
Powered by blists - more mailing lists