linux-kernel - [PATCH (v2)] scsi: sd: add parameter to stop disks before reboot

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <e726ffd8-8897-4a79-c3d6-6271eda8aebb@0882a8b5-c6c3-11e9-b005-00805fc181fe>
Date:   Sun, 28 Jun 2020 19:32:51 +0100
From:   Simon Arlott <simon@...iron.net>
To:     "James E.J. Bottomley" <jejb@...ux.ibm.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        Jonathan Corbet <corbet@....net>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-scsi@...r.kernel.org, linux-doc@...r.kernel.org
Cc:     Bart Van Assche <bvanassche@....org>,
        Christoph Hellwig <hch@...radead.org>,
        Damien Le Moal <Damien.LeMoal@....com>,
        Pavel Machek <pavel@....cz>,
        Henrique de Moraes Holschuh <hmh@....eng.br>
Subject: [PATCH (v2)] scsi: sd: add parameter to stop disks before reboot

I need to use "reboot=p" on my desktop because one of the PCIe devices
does not appear after a warm boot. This results in a very cold boot
because the BIOS turns the PSU off and on.

The scsi sd shutdown process does not send a stop command to disks
before the reboot happens (stop commands are only sent for a shutdown).

The result is that all of my SSDs experience a sudden power loss on
every reboot, which is undesirable behaviour because it could cause data
to be corrupted. These events are recorded in the SMART attributes.

Add a "stop_before_reboot" module parameter that can be used to control
the shutdown behaviour of disks before a reboot. The default will be
the existing behaviour (disks are not stopped).

  sd_mod.stop_before_reboot=<integer>
    0 = disabled (default)
    1 = enabled

The behaviour on shutdown is unchanged: all disks are unconditionally
stopped.

Signed-off-by: Simon Arlott <simon@...iron.net>
---
 Documentation/scsi/scsi-parameters.rst |  5 +++++
 drivers/scsi/sd.c                      | 14 +++++++++++---
 2 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/Documentation/scsi/scsi-parameters.rst b/Documentation/scsi/scsi-parameters.rst
index 9aba897c97ac..324610870de5 100644
--- a/Documentation/scsi/scsi-parameters.rst
+++ b/Documentation/scsi/scsi-parameters.rst
@@ -101,6 +101,11 @@ parameters may be changed at runtime by the command
 			allowing boot to proceed.  none ignores them, expecting
 			user space to do the scan.
 
+	sd_mod.stop_before_reboot=
+			[SCSI] configure stop action for disks before a reboot
+			Format: <integer>
+			0 = disabled (default), 1 = enabled
+
 	sim710=		[SCSI,HW]
 			See header of drivers/scsi/sim710.c.
 
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index d90fefffe31b..506904bf15da 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -98,6 +98,12 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
 MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
 MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC);
 
+static unsigned int stop_before_reboot = 0;
+
+module_param(stop_before_reboot, uint, 0644);
+MODULE_PARM_DESC(stop_before_reboot,
+		 "stop disks before reboot");
+
 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
 #define SD_MINORS	16
 #else
@@ -3576,9 +3582,11 @@ static void sd_shutdown(struct device *dev)
 		sd_sync_cache(sdkp, NULL);
 	}
 
-	if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
-		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
-		sd_start_stop_device(sdkp, 0);
+	if (sdkp->device->manage_start_stop) {
+		if (system_state != SYSTEM_RESTART || stop_before_reboot) {
+			sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
+			sd_start_stop_device(sdkp, 0);
+		}
 	}
 }
 
-- 
2.17.1

-- 
Simon Arlott