linux-kernel - [PATCH 4.19 046/131] xhci: Poll for U0 after disabling USB2 LPM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200629153502.2494656-47-sashal@kernel.org>
Date:   Mon, 29 Jun 2020 11:33:37 -0400
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Kai-Heng Feng <kai.heng.feng@...onical.com>,
        Mathias Nyman <mathias.nyman@...ux.intel.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: [PATCH 4.19 046/131] xhci: Poll for U0 after disabling USB2 LPM

From: Kai-Heng Feng <kai.heng.feng@...onical.com>

commit b3d71abd135e6919ca0b6cab463738472653ddfb upstream.

USB2 devices with LPM enabled may interrupt the system suspend:
[  932.510475] usb 1-7: usb suspend, wakeup 0
[  932.510549] hub 1-0:1.0: hub_suspend
[  932.510581] usb usb1: bus suspend, wakeup 0
[  932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended
[  932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended
..
[  932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03
..
[  932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16
[  932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16
[  932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16

During system suspend, USB core will let HC suspends the device if it
doesn't have remote wakeup enabled and doesn't have any children.
However, from the log above we can see that the usb 1-7 doesn't get bus
suspended due to not in U0. After a while the port finished U2 -> U0
transition, interrupts the suspend process.

The observation is that after disabling LPM, port doesn't transit to U0
immediately and can linger in U2. xHCI spec 4.23.5.2 states that the
maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for
the affected device is advertised as 400us, which is still not enough
based on my testing result.

So let's use the maximum permitted latency, 10000, to poll for U0
status to solve the issue.

Cc: stable@...r.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/usb/host/xhci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b4177287d7d0f..b02b83a38dca1 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4385,6 +4385,9 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 			mutex_lock(hcd->bandwidth_mutex);
 			xhci_change_max_exit_latency(xhci, udev, 0);
 			mutex_unlock(hcd->bandwidth_mutex);
+			readl_poll_timeout(ports[port_num]->addr, pm_val,
+					   (pm_val & PORT_PLS_MASK) == XDEV_U0,
+					   100, 10000);
 			return 0;
 		}
 	}
-- 
2.25.1