lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 29 Jun 2020 15:45:19 +0800 From: andy.tang@....com To: shawnguo@...nel.org Cc: leoyang.li@....com, robh+dt@...nel.org, linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, Yuantian Tang <andy.tang@....com> Subject: [PATCH 2/2] arm64: dts: ls1043a: add more thermal zone support From: Yuantian Tang <andy.tang@....com> There are 5 thermal zones in ls1043a soc. Add the rest thermal zone nodes to enable them. Signed-off-by: Yuantian Tang <andy.tang@....com> --- .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 88 ++++++++++++++++++- 1 file changed, 84 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 3b641bd43229..17497b0d3542 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -149,19 +149,79 @@ }; thermal-zones { - cpu_thermal: cpu-thermal { + ddr-controller { polling-delay-passive = <1000>; polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + trips { + ddr-ctrler-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr-ctrler-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + serdes { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { + serdes-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + serdes-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + fman { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 2>; + + trips { + fman-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + fman-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; thermal-sensors = <&tmu 3>; trips { - cpu_alert: cpu-alert { + core_cluster_alert: core-cluster-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu-crit { + + core_cluster_crit: core-cluster-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -170,7 +230,7 @@ cooling-maps { map0 { - trip = <&cpu_alert>; + trip = <&core_cluster_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -179,6 +239,26 @@ }; }; }; + + sec { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 4>; + + trips { + sec-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + sec-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; }; timer { -- 2.17.1
Powered by blists - more mailing lists