Message-Id: <OW7RCQ.MFWU5QXTLAOD2@crapouillou.net>
Date:   Tue, 30 Jun 2020 21:38:48 +0200
From:   Paul Cercueil <paul@...pouillou.net>
To:     周琰杰 <zhouyanjie@...yeetech.com>
Cc:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        daniel.lezcano@...aro.org, tglx@...utronix.de, robh+dt@...nel.org,
        dongsheng.qiu@...enic.com, aric.pzqi@...enic.com,
        rick.tyliu@...enic.com, yanfei.li@...enic.com,
        sernia.zhou@...mail.com, zhenwenjin@...il.com
Subject: Re: [PATCH v3 2/2] clocksource: Ingenic: Add support for the Ingenic
 X1000 OST.

Hi Zhou,

Le mer. 1 juil. 2020 à 1:15, 周琰杰 (Zhou Yanjie) 
<zhouyanjie@...yeetech.com> a écrit :
> X1000 and SoCs after X1000 (such as X1500 and X1830) had a separate
> OST, it no longer belongs to TCU. This driver will register both a
> clocksource and a sched_clock to the system.
> 
> Tested-by: 周正 (Zhou Zheng) <sernia.zhou@...mail.com>
> Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@...enic.com>
> Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@...enic.com>
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@...yeetech.com>
> ---
> 
> Notes:
>     v1->v2:
>     Fix compile warnings.
>     Reported-by: kernel test robot <lkp@...el.com>
> 
>     v2->v3:
>     No change.
> 
>  drivers/clocksource/Kconfig          |  19 +-
>  drivers/clocksource/Makefile         |   1 +
>  drivers/clocksource/ingenic-sysost.c | 509 
> +++++++++++++++++++++++++++++++++++
>  3 files changed, 525 insertions(+), 4 deletions(-)
>  create mode 100644 drivers/clocksource/ingenic-sysost.c
> 
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 91418381fcd4..172397a00f3e 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -686,7 +686,7 @@ config MILBEAUT_TIMER
>  	  Enables the support for Milbeaut timer driver.
> 
>  config INGENIC_TIMER
> -	bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
> +	bool "Clocksource/timer using the TCU in Ingenic SoCs"

This cosmetic change is unrelated to the patch, please drop it.

>  	default MACH_INGENIC
>  	depends on MIPS || COMPILE_TEST
>  	depends on COMMON_CLK
> @@ -694,15 +694,26 @@ config INGENIC_TIMER
>  	select TIMER_OF
>  	select IRQ_DOMAIN
>  	help
> -	  Support for the timer/counter unit of the Ingenic JZ SoCs.
> +	  Support for the timer/counter unit of the Ingenic SoCs.

Same here.

> +
> +config INGENIC_SYSOST
> +	bool "Clocksource/timer using the SYSOST in Ingenic SoCs"
> +	default MACH_INGENIC
> +	depends on MIPS || COMPILE_TEST
> +	depends on COMMON_CLK
> +	select MFD_SYSCON
> +	select TIMER_OF
> +	select IRQ_DOMAIN
> +	help
> +	  This option enables support for SYSOST in Ingenic SoCs .
> 
>  config INGENIC_OST
> -	bool "Clocksource for Ingenic OS Timer"
> +	bool "Clocksource for Ingenic OST"

Same here.

>  	depends on MIPS || COMPILE_TEST
>  	depends on COMMON_CLK
>  	select MFD_SYSCON
>  	help
> -	  Support for the Operating System Timer of the Ingenic JZ SoCs.
> +	  Support for the Operating System Timer of the Ingenic SoCs.

Same here.

> 
>  config MICROCHIP_PIT64B
>  	bool "Microchip PIT64B support"
> diff --git a/drivers/clocksource/Makefile 
> b/drivers/clocksource/Makefile
> index bdda1a2e4097..3994e221e262 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -82,6 +82,7 @@ obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
>  obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
>  obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
>  obj-$(CONFIG_INGENIC_OST)		+= ingenic-ost.o
> +obj-$(CONFIG_INGENIC_SYSOST)	+= ingenic-sysost.o
>  obj-$(CONFIG_INGENIC_TIMER)		+= ingenic-timer.o
>  obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
>  obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
> diff --git a/drivers/clocksource/ingenic-sysost.c 
> b/drivers/clocksource/ingenic-sysost.c
> new file mode 100644
> index 000000000000..d3e1b7582221
> --- /dev/null
> +++ b/drivers/clocksource/ingenic-sysost.c
> @@ -0,0 +1,509 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Ingenic XBurst SoCs SYSOST clocks driver
> + * Copyright (c) 2020 周琰杰 (Zhou Yanjie) 
> <zhouyanjie@...yeetech.com>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clockchips.h>
> +#include <linux/clocksource.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/sched_clock.h>
> +#include <linux/slab.h>
> +#include <linux/syscore_ops.h>
> +
> +#include <dt-bindings/clock/ingenic,ost.h>
> +
> +/* OST register offsets */
> +#define OST_REG_OSTCCR			0x00
> +#define OST_REG_OSTCR			0x08
> +#define OST_REG_OSTFR			0x0c
> +#define OST_REG_OSTMR			0x10
> +#define OST_REG_OST1DFR			0x14
> +#define OST_REG_OST1CNT			0x18
> +#define OST_REG_OST2CNTL		0x20
> +#define OST_REG_OSTCNT2HBUF		0x24
> +#define OST_REG_OSTESR			0x34
> +#define OST_REG_OSTECR			0x38
> +
> +/* bits within the OSTCCR register */
> +#define OSTCCR_PRESCALE1_MASK	0x3
> +#define OSTCCR_PRESCALE2_MASK	0xc
> +#define OSTCCR_PRESCALE1_LSB	0
> +#define OSTCCR_PRESCALE2_LSB	2
> +
> +/* bits within the OSTCR register */
> +#define OSTCR_OST1CLR			BIT(0)
> +#define OSTCR_OST2CLR			BIT(1)
> +
> +/* bits within the OSTFR register */
> +#define OSTFR_FFLAG				BIT(0)
> +
> +/* bits within the OSTMR register */
> +#define OSTMR_FMASK				BIT(0)
> +
> +/* bits within the OSTESR register */
> +#define OSTESR_OST1ENS			BIT(0)
> +#define OSTESR_OST2ENS			BIT(1)
> +
> +/* bits within the OSTECR register */
> +#define OSTECR_OST1ENC			BIT(0)
> +#define OSTECR_OST2ENC			BIT(1)
> +
> +enum ost_clk_parent {
> +	OST_PARENT_EXT,
> +};
> +
> +struct ingenic_soc_info {
> +	unsigned int num_channels;
> +};

Unless you plan to add support for other SoCs which have more than 2 
channels, I think you can drop this - just add a OST_NUM_CHANNELS macro.

> +
> +struct ingenic_ost_clk_info {
> +	struct clk_init_data init_data;
> +	u8 ostccr_reg;
> +};
> +
> +struct ingenic_ost_clk {
> +	struct clk_hw hw;
> +	unsigned int idx;
> +	struct ingenic_ost *ost;
> +	const struct ingenic_ost_clk_info *info;
> +};
> +
> +struct ingenic_ost {
> +	void __iomem *base;
> +	const struct ingenic_soc_info *soc_info;
> +	struct clk *clk, *percpu_timer_clk, *global_timer_clk;
> +	unsigned int percpu_timer_channel, global_timer_channel;
> +	struct clock_event_device cevt;
> +	struct clocksource cs;
> +	char name[20];
> +
> +	struct clk_hw_onecell_data *clocks;
> +};
> +
> +static struct ingenic_ost *ingenic_ost;
> +
> +static inline struct ingenic_ost_clk *to_ost_clk(struct clk_hw *hw)
> +{
> +	return container_of(hw, struct ingenic_ost_clk, hw);
> +}
> +
> +static unsigned long ingenic_ost_recalc_rate(struct clk_hw *hw,
> +		unsigned long parent_rate)
> +{
> +	struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
> +	const struct ingenic_ost_clk_info *info = ost_clk->info;
> +	unsigned int prescale;
> +
> +	prescale = readl(ost_clk->ost->base + info->ostccr_reg);
> +
> +	if (ost_clk->idx == OST_CLK_PERCPU_TIMER)
> +		prescale = (prescale & OSTCCR_PRESCALE1_MASK) >> 
> OSTCCR_PRESCALE1_LSB;
> +	else if (ost_clk->idx == OST_CLK_GLOBAL_TIMER)
> +		prescale = (prescale & OSTCCR_PRESCALE2_MASK) >> 
> OSTCCR_PRESCALE2_LSB;

Instead of checking which clock you're manipulating here, just set a 
different .recalc_rate to the two clocks.

> +
> +	return parent_rate >> (prescale * 2);
> +}
> +
> +static u8 ingenic_ost_get_prescale(unsigned long rate, unsigned long 
> req_rate)
> +{
> +	u8 prescale;
> +
> +	for (prescale = 0; prescale < 2; prescale++)
> +		if ((rate >> (prescale * 2)) <= req_rate)
> +			return prescale;
> +
> +	return 2; /* /16 divider */
> +}
> +
> +static long ingenic_ost_round_rate(struct clk_hw *hw, unsigned long 
> req_rate,
> +		unsigned long *parent_rate)
> +{
> +	unsigned long rate = *parent_rate;
> +	u8 prescale;
> +
> +	if (req_rate > rate)
> +		return rate;
> +
> +	prescale = ingenic_ost_get_prescale(rate, req_rate);
> +
> +	return rate >> (prescale * 2);
> +}
> +
> +static int ingenic_ost_set_rate(struct clk_hw *hw, unsigned long 
> req_rate,
> +		unsigned long parent_rate)
> +{
> +	struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
> +	const struct ingenic_ost_clk_info *info = ost_clk->info;
> +	u8 prescale = ingenic_ost_get_prescale(parent_rate, req_rate);
> +	int val;
> +
> +	if (ost_clk->idx == OST_CLK_PERCPU_TIMER) {
> +		val = readl(ost_clk->ost->base + info->ostccr_reg);
> +		val = (val & ~OSTCCR_PRESCALE1_MASK) | (prescale << 
> OSTCCR_PRESCALE1_LSB);
> +		writel(val, ost_clk->ost->base + info->ostccr_reg);
> +	} else if (ost_clk->idx == OST_CLK_GLOBAL_TIMER) {
> +		val = readl(ost_clk->ost->base + info->ostccr_reg);
> +		val = (val & ~OSTCCR_PRESCALE2_MASK) | (prescale << 
> OSTCCR_PRESCALE2_LSB);
> +		writel(val, ost_clk->ost->base + info->ostccr_reg);
> +	}

Same here - set a different .set_rate() callback to the two clocks.

> +
> +	return 0;
> +}
> +
> +static const struct clk_ops ingenic_ost_clk_ops = {
> +	.recalc_rate	= ingenic_ost_recalc_rate,
> +	.round_rate	= ingenic_ost_round_rate,
> +	.set_rate	= ingenic_ost_set_rate,
> +};
> +
> +static const char * const ingenic_ost_clk_parents[] = {
> +	[OST_PARENT_EXT]  = "ext",
> +};

just { "ext" } will be fine, no need to specify the index, which is 
zero anyway. Then you can drop the ost_clock_parent enum.

> +
> +#define DEF_TIMER(_name, _ostccr) { \
> +	.init_data = { \
> +		.name = _name, \
> +		.parent_names = ingenic_ost_clk_parents, \
> +		.num_parents = ARRAY_SIZE(ingenic_ost_clk_parents), \
> +		.ops = &ingenic_ost_clk_ops, \
> +		.flags = CLK_SET_RATE_UNGATE, \
> +	}, \
> +	.ostccr_reg = _ostccr, \
> +}
> +
> +static const struct ingenic_ost_clk_info ingenic_ost_clk_info[] = {
> +	[OST_CLK_PERCPU_TIMER] = DEF_TIMER("percpu timer", OST_REG_OSTCCR),
> +	[OST_CLK_GLOBAL_TIMER] = DEF_TIMER("global timer", OST_REG_OSTCCR),
> +};
> +
> +#undef DEF_TIMER
> +
> +static u64 notrace ingenic_ost_global_timer_read_cntl(void)
> +{
> +	struct ingenic_ost *ost = ingenic_ost;
> +	unsigned int count;
> +
> +	count = readl(ost->base + OST_REG_OST2CNTL);
> +
> +	return count;
> +}
> +
> +static u64 notrace ingenic_ost_clocksource_read(struct clocksource 
> *cs)
> +{
> +	return ingenic_ost_global_timer_read_cntl();
> +}
> +
> +static inline struct ingenic_ost *to_ingenic_ost(struct 
> clock_event_device *evt)
> +{
> +	return container_of(evt, struct ingenic_ost, cevt);
> +}
> +
> +static int ingenic_ost_cevt_set_state_shutdown(struct 
> clock_event_device *evt)
> +{
> +	struct ingenic_ost *ost = to_ingenic_ost(evt);
> +
> +	writel(OSTECR_OST1ENC, ost->base + OST_REG_OSTECR);
> +
> +	return 0;
> +}
> +
> +static int ingenic_ost_cevt_set_next(unsigned long next,
> +				     struct clock_event_device *evt)
> +{
> +	struct ingenic_ost *ost = to_ingenic_ost(evt);
> +
> +	writel((u32)~OSTFR_FFLAG, ost->base + OST_REG_OSTFR);
> +	writel(next, ost->base + OST_REG_OST1DFR);
> +	writel(OSTCR_OST1CLR, ost->base + OST_REG_OSTCR);
> +	writel(OSTESR_OST1ENS, ost->base + OST_REG_OSTESR);
> +	writel((u32)~OSTMR_FMASK, ost->base + OST_REG_OSTMR);
> +
> +	return 0;
> +}
> +
> +static irqreturn_t ingenic_ost_cevt_cb(int irq, void *dev_id)
> +{
> +	struct clock_event_device *evt = dev_id;
> +	struct ingenic_ost *ost = to_ingenic_ost(evt);
> +
> +	writel(OSTECR_OST1ENC, ost->base + OST_REG_OSTECR);
> +
> +	if (evt->event_handler)
> +		evt->event_handler(evt);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int __init ingenic_ost_register_clock(struct ingenic_ost *ost,
> +			unsigned int idx, const struct ingenic_ost_clk_info *info,
> +			struct clk_hw_onecell_data *clocks)
> +{
> +	struct ingenic_ost_clk *ost_clk;
> +	int val, err;
> +
> +	ost_clk = kzalloc(sizeof(*ost_clk), GFP_KERNEL);
> +	if (!ost_clk)
> +		return -ENOMEM;
> +
> +	ost_clk->hw.init = &info->init_data;
> +	ost_clk->idx = idx;
> +	ost_clk->info = info;
> +	ost_clk->ost = ost;
> +
> +	/* Reset clock divider */
> +	val = readl(ost->base + info->ostccr_reg);
> +	val &= ~(OSTCCR_PRESCALE1_MASK | OSTCCR_PRESCALE2_MASK);
> +	writel(val, ost->base + info->ostccr_reg);
> +
> +	err = clk_hw_register(NULL, &ost_clk->hw);
> +	if (err) {
> +		kfree(ost_clk);
> +		return err;
> +	}
> +
> +	clocks->hws[idx] = &ost_clk->hw;
> +
> +	return 0;
> +}
> +
> +static struct clk * __init ingenic_ost_get_clock(struct device_node 
> *np, int id)
> +{
> +	struct of_phandle_args args;
> +
> +	args.np = np;
> +	args.args_count = 1;
> +	args.args[0] = id;
> +
> +	return of_clk_get_from_provider(&args);
> +}
> +
> +static int __init ingenic_ost_percpu_timer_init(struct device_node 
> *np,
> +					 struct ingenic_ost *ost)
> +{
> +	unsigned int timer_virq, channel = ost->percpu_timer_channel;
> +	unsigned long rate;
> +	int err;
> +
> +	ost->percpu_timer_clk = ingenic_ost_get_clock(np, channel);
> +	if (IS_ERR(ost->percpu_timer_clk))
> +		return PTR_ERR(ost->percpu_timer_clk);
> +
> +	err = clk_prepare_enable(ost->percpu_timer_clk);
> +	if (err)
> +		goto err_clk_put;
> +
> +	rate = clk_get_rate(ost->percpu_timer_clk);
> +	if (!rate) {
> +		err = -EINVAL;
> +		goto err_clk_disable;
> +	}
> +
> +	timer_virq = of_irq_get(np, 0);
> +	if (!timer_virq) {
> +		err = -EINVAL;
> +		goto err_clk_disable;
> +	}
> +
> +	snprintf(ost->name, sizeof(ost->name), "OST percpu timer");
> +
> +	err = request_irq(timer_virq, ingenic_ost_cevt_cb, IRQF_TIMER,
> +			  ost->name, &ost->cevt);
> +	if (err)
> +		goto err_irq_dispose_mapping;
> +
> +	ost->cevt.cpumask = cpumask_of(smp_processor_id());
> +	ost->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
> +	ost->cevt.name = ost->name;
> +	ost->cevt.rating = 400;
> +	ost->cevt.set_state_shutdown = ingenic_ost_cevt_set_state_shutdown;
> +	ost->cevt.set_next_event = ingenic_ost_cevt_set_next;
> +
> +	clockevents_config_and_register(&ost->cevt, rate, 4, 0xffffffff);
> +
> +	return 0;
> +
> +err_irq_dispose_mapping:
> +	irq_dispose_mapping(timer_virq);
> +err_clk_disable:
> +	clk_disable_unprepare(ost->percpu_timer_clk);
> +err_clk_put:
> +	clk_put(ost->percpu_timer_clk);
> +	return err;
> +}
> +
> +static int __init ingenic_ost_global_timer_init(struct device_node 
> *np,
> +					       struct ingenic_ost *ost)
> +{
> +	unsigned int channel = ost->global_timer_channel;
> +	struct clocksource *cs = &ost->cs;
> +	unsigned long rate;
> +	int err;
> +
> +	ost->global_timer_clk = ingenic_ost_get_clock(np, channel);
> +	if (IS_ERR(ost->global_timer_clk))
> +		return PTR_ERR(ost->global_timer_clk);
> +
> +	err = clk_prepare_enable(ost->global_timer_clk);
> +	if (err)
> +		goto err_clk_put;
> +
> +	rate = clk_get_rate(ost->global_timer_clk);
> +	if (!rate) {
> +		err = -EINVAL;
> +		goto err_clk_disable;
> +	}
> +
> +	/* Clear counter CNT registers */
> +	writel(OSTCR_OST2CLR, ost->base + OST_REG_OSTCR);
> +
> +	/* Enable OST channel */
> +	writel(OSTESR_OST2ENS, ost->base + OST_REG_OSTESR);
> +
> +	cs->name = "ingenic-ost";
> +	cs->rating = 400;
> +	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
> +	cs->mask = CLOCKSOURCE_MASK(32);
> +	cs->read = ingenic_ost_clocksource_read;
> +
> +	err = clocksource_register_hz(cs, rate);
> +	if (err)
> +		goto err_clk_disable;
> +
> +	return 0;
> +
> +err_clk_disable:
> +	clk_disable_unprepare(ost->global_timer_clk);
> +err_clk_put:
> +	clk_put(ost->global_timer_clk);
> +	return err;
> +}
> +
> +static const struct ingenic_soc_info x1000_soc_info = {
> +	.num_channels = 2,
> +};
> +
> +static const struct of_device_id __maybe_unused 
> ingenic_ost_of_match[] __initconst = {
> +	{ .compatible = "ingenic,x1000-ost", .data = &x1000_soc_info, },
> +	{ /* sentinel */ }
> +};
> +
> +static int __init ingenic_ost_probe(struct device_node *np)
> +{
> +	const struct of_device_id *id = of_match_node(ingenic_ost_of_match, 
> np);
> +	struct ingenic_ost *ost;
> +	unsigned int i;
> +	int ret;
> +
> +	ost = kzalloc(sizeof(*ost), GFP_KERNEL);
> +	if (!ost)
> +		return -ENOMEM;
> +
> +	ost->base = of_iomap(np, 0);
> +	if (IS_ERR(ost->base)) {
> +		pr_err("%s: Failed to map OST registers\n", __func__);
> +		ret = PTR_ERR(ost->base);
> +		goto err_free_ost;
> +	}
> +
> +	ost->clk = of_clk_get_by_name(np, "ost");
> +	if (IS_ERR(ost->clk)) {
> +		ret = PTR_ERR(ost->clk);
> +		pr_crit("%s: Cannot get OST clock\n", __func__);
> +		goto err_free_ost;
> +	}
> +
> +	ret = clk_prepare_enable(ost->clk);
> +	if (ret) {
> +		pr_crit("%s: Unable to enable OST clock\n", __func__);
> +		goto err_put_clk;
> +	}
> +
> +	ost->soc_info = id->data;
> +
> +	ost->clocks = kzalloc(struct_size(ost->clocks, hws, 
> ost->soc_info->num_channels),
> +			      GFP_KERNEL);
> +	if (!ost->clocks) {
> +		ret = -ENOMEM;
> +		goto err_clk_disable;
> +	}
> +
> +	ost->clocks->num = ost->soc_info->num_channels;
> +
> +	for (i = 0; i < ost->clocks->num; i++) {
> +		ret = ingenic_ost_register_clock(ost, i, &ingenic_ost_clk_info[i], 
> ost->clocks);
> +		if (ret) {
> +			pr_crit("%s: Cannot register clock %d\n", __func__, i);
> +			goto err_unregister_ost_clocks;
> +		}
> +	}
> +
> +	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, 
> ost->clocks);
> +	if (ret) {
> +		pr_crit("%s: Cannot add OF clock provider\n", __func__);
> +		goto err_unregister_ost_clocks;
> +	}
> +
> +	ost->percpu_timer_channel = OST_CLK_PERCPU_TIMER;
> +	ost->global_timer_channel = OST_CLK_GLOBAL_TIMER;

If that's a constant, just use the constant where 
'ost->percpu_timer_channel' and 'ost->global_timer_channel' are used, I 
think.

> +
> +	ingenic_ost = ost;
> +
> +	return 0;
> +
> +err_unregister_ost_clocks:
> +	for (i = 0; i < ost->clocks->num; i++)
> +		if (ost->clocks->hws[i])
> +			clk_hw_unregister(ost->clocks->hws[i]);
> +	kfree(ost->clocks);
> +err_clk_disable:
> +	clk_disable_unprepare(ost->clk);
> +err_put_clk:
> +	clk_put(ost->clk);
> +err_free_ost:
> +	kfree(ost);
> +	return ret;
> +}
> +
> +static int __init ingenic_ost_init(struct device_node *np)
> +{
> +	unsigned long rate;
> +	int ret = ingenic_ost_probe(np);

Don't call functions in variable declarations - they can be overlooked 
easily.

> +
> +	if (ret)
> +		pr_crit("%s: Failed to initialize OST clocks: %d\n", __func__, 
> ret);

return ret?

> +
> +	of_node_clear_flag(np, OF_POPULATED);
> +
> +	ret = ingenic_ost_global_timer_init(np, ingenic_ost);

The 'ingenic_ost' variable is just a dirty workaround for the 
sched_clock callback, which does not take any parameter. Avoid using it 
here. Make ingenic_ost_probe() return a pointer to your ingenic_ost 
instance (and a PTR_ERR() on error), and use that pointer for the rest.

Cheers,
-Paul

> +	if (ret) {
> +		pr_crit("%s: Unable to init global timer: %x\n", __func__, ret);
> +		goto err_free_ingenic_ost;
> +	}
> +
> +	ret = ingenic_ost_percpu_timer_init(np, ingenic_ost);
> +	if (ret)
> +		goto err_ost_global_timer_cleanup;
> +
> +	/* Register the sched_clock at the end as there's no way to undo it 
> */
> +	rate = clk_get_rate(ingenic_ost->global_timer_clk);
> +	sched_clock_register(ingenic_ost_global_timer_read_cntl, 32, rate);
> +
> +	return 0;
> +
> +err_ost_global_timer_cleanup:
> +	clocksource_unregister(&ingenic_ost->cs);
> +	clk_disable_unprepare(ingenic_ost->global_timer_clk);
> +	clk_put(ingenic_ost->global_timer_clk);
> +err_free_ingenic_ost:
> +	kfree(ingenic_ost);
> +	return ret;
> +}
> +
> +TIMER_OF_DECLARE(x1000_ost,  "ingenic,x1000-ost",  ingenic_ost_init);
> --
> 2.11.0
> 

Powered by blists - more mailing lists