| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 30 Jun 2020 15:02:38 -0700
From: Siddharth Gupta <sidgup@...eaurora.org>
To: Arnaud POULIQUEN <arnaud.pouliquen@...com>,
"rishabhb@...eaurora.org" <rishabhb@...eaurora.org>
Cc: "linux-remoteproc@...r.kernel.org" <linux-remoteproc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"bjorn.andersson@...aro.org" <bjorn.andersson@...aro.org>,
"mathieu.poirier@...aro.org" <mathieu.poirier@...aro.org>,
"ohad@...ery.com" <ohad@...ery.com>,
"tsoni@...eaurora.org" <tsoni@...eaurora.org>,
"psodagud@...eaurora.org" <psodagud@...eaurora.org>,
"linux-remoteproc-owner@...r.kernel.org"
<linux-remoteproc-owner@...r.kernel.org>
Subject: Re: [PATCH v3 1/2] remoteproc: Add remoteproc character device
interface
On 6/30/2020 12:43 AM, Arnaud POULIQUEN wrote:
>
> On 6/30/20 7:38 AM, Siddharth Gupta wrote:
>> On 6/17/2020 1:44 AM, Arnaud POULIQUEN wrote:
>>> On 6/16/20 9:56 PM, rishabhb@...eaurora.org wrote:
>>>> On 2020-04-30 01:30, Arnaud POULIQUEN wrote:
>>>>> Hi Rishabh,
>>>>>
>>>>>
>>>>> On 4/21/20 8:10 PM, Rishabh Bhatnagar wrote:
>>>>>> Add the character device interface into remoteproc framework.
>>>>>> This interface can be used in order to boot/shutdown remote
>>>>>> subsystems and provides a basic ioctl based interface to implement
>>>>>> supplementary functionality. An ioctl call is implemented to enable
>>>>>> the shutdown on release feature which will allow remote processors to
>>>>>> be shutdown when the controlling userpsace application crashes or
>>>>>> hangs.
>>>>>>
>>>>> Thanks for intruducing Ioctl, this will help for future evolutions.
>>>>>
>>>>>> Signed-off-by: Rishabh Bhatnagar <rishabhb@...eaurora.org>
>>>>>> ---
>>>>>> Documentation/userspace-api/ioctl/ioctl-number.rst | 1 +
>>>>>> drivers/remoteproc/Kconfig | 9 ++
>>>>>> drivers/remoteproc/Makefile | 1 +
>>>>>> drivers/remoteproc/remoteproc_cdev.c | 143
>>>>>> +++++++++++++++++++++
>>>>>> drivers/remoteproc/remoteproc_internal.h | 21 +++
>>>>>> include/linux/remoteproc.h | 3 +
>>>>>> include/uapi/linux/remoteproc_cdev.h | 20 +++
>>>>>> 7 files changed, 198 insertions(+)
>>>>>> create mode 100644 drivers/remoteproc/remoteproc_cdev.c
>>>>>> create mode 100644 include/uapi/linux/remoteproc_cdev.h
>>>>>>
>>>>>> diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst
>>>>>> b/Documentation/userspace-api/ioctl/ioctl-number.rst
>>>>>> index 2e91370..412b2a0 100644
>>>>>> --- a/Documentation/userspace-api/ioctl/ioctl-number.rst
>>>>>> +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
>>>>>> @@ -337,6 +337,7 @@ Code Seq# Include File
>>>>>> Comments
>>>>>> 0xB4 00-0F linux/gpio.h
>>>>>> <mailto:linux-gpio@...r.kernel.org>
>>>>>> 0xB5 00-0F uapi/linux/rpmsg.h
>>>>>> <mailto:linux-remoteproc@...r.kernel.org>
>>>>>> 0xB6 all linux/fpga-dfl.h
>>>>>> +0xB7 all uapi/linux/remoteproc_cdev.h
>>>>>> <mailto:linux-remoteproc@...r.kernel.org>
>>>>>> 0xC0 00-0F linux/usb/iowarrior.h
>>>>>> 0xCA 00-0F uapi/misc/cxl.h
>>>>>> 0xCA 10-2F uapi/misc/ocxl.h
>>>>>> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
>>>>>> index de3862c..6374b79 100644
>>>>>> --- a/drivers/remoteproc/Kconfig
>>>>>> +++ b/drivers/remoteproc/Kconfig
>>>>>> @@ -14,6 +14,15 @@ config REMOTEPROC
>>>>>>
>>>>>> if REMOTEPROC
>>>>>>
>>>>>> +config REMOTEPROC_CDEV
>>>>>> + bool "Remoteproc character device interface"
>>>>>> + help
>>>>>> + Say y here to have a character device interface for Remoteproc
>>>>>> + framework. Userspace can boot/shutdown remote processors through
>>>>>> + this interface.
>>>>>> +
>>>>>> + It's safe to say N if you don't want to use this interface.
>>>>>> +
>>>>>> config IMX_REMOTEPROC
>>>>>> tristate "IMX6/7 remoteproc support"
>>>>>> depends on ARCH_MXC
>>>>>> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
>>>>>> index e30a1b1..b7d4f77 100644
>>>>>> --- a/drivers/remoteproc/Makefile
>>>>>> +++ b/drivers/remoteproc/Makefile
>>>>>> @@ -9,6 +9,7 @@ remoteproc-y += remoteproc_debugfs.o
>>>>>> remoteproc-y += remoteproc_sysfs.o
>>>>>> remoteproc-y += remoteproc_virtio.o
>>>>>> remoteproc-y += remoteproc_elf_loader.o
>>>>>> +obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o
>>>>>> obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
>>>>>> obj-$(CONFIG_MTK_SCP) += mtk_scp.o mtk_scp_ipi.o
>>>>>> obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
>>>>>> diff --git a/drivers/remoteproc/remoteproc_cdev.c
>>>>>> b/drivers/remoteproc/remoteproc_cdev.c
>>>>>> new file mode 100644
>>>>>> index 0000000..65142ec
>>>>>> --- /dev/null
>>>>>> +++ b/drivers/remoteproc/remoteproc_cdev.c
>>>>>> @@ -0,0 +1,143 @@
>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>> +/*
>>>>>> + * Character device interface driver for Remoteproc framework.
>>>>>> + *
>>>>>> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
>>>>>> + */
>>>>>> +
>>>>>> +#include <linux/cdev.h>
>>>>>> +#include <linux/fs.h>
>>>>>> +#include <linux/module.h>
>>>>>> +#include <linux/mutex.h>
>>>>>> +#include <linux/remoteproc.h>
>>>>>> +#include <uapi/linux/remoteproc_cdev.h>
>>>>>> +#include <linux/uaccess.h>
>>>>>> +
>>>>>> +#include "remoteproc_internal.h"
>>>>>> +
>>>>>> +#define NUM_RPROC_DEVICES 64
>>>>>> +static dev_t rproc_major;
>>>>>> +
>>>>>> +static ssize_t rproc_cdev_write(struct file *filp, const char __user
>>>>>> *buf,
>>>>>> + size_t len, loff_t *pos)
>>>>>> +{
>>>>>> + struct rproc *rproc = container_of(filp->f_inode->i_cdev,
>>>>>> + struct rproc, char_dev);
>>>>>> + int ret = 0;
>>>>>> + char cmd[10];
>>>>>> +
>>>>>> + if (!len || len > sizeof(cmd))
>>>>>> + return -EINVAL;
>>>>>> +
>>>>>> + ret = copy_from_user(cmd, buf, sizeof(cmd));
>>>>>> + if (ret)
>>>>>> + return -EFAULT;
>>>>>> +
>>>>>> + if (sysfs_streq(cmd, "start")) {
>>>>>> + if (rproc->state == RPROC_RUNNING)
>>>>>> + return -EBUSY;
>>>>>> +
>>>>>> + ret = rproc_boot(rproc);
>>>>>> + if (ret)
>>>>>> + dev_err(&rproc->dev, "Boot failed:%d\n", ret);
>>>>>> + } else if (sysfs_streq(cmd, "stop")) {
>>>>>> + if (rproc->state == RPROC_OFFLINE)
>>>>>> + return -ENXIO;
>>>>> returning ENXIO in this case seems to me no appropriate , what about
>>>>> EPERM or
>>>>> EINVAL (rproc_sysfs) ?
>> I think EPERM would indicate the operation is not permitted on the
>> device, and
>> EINVAL would indicate that the command/string they wrote to the char device
>> is not a valid command/string. I guess even ENXIO may not be appropriate?
>>
>> In that case we could use EHOSTDOWN or ESHUTDOWN, thoughts?
> Regarding remoteproc_sysfs.c[1], seems that the -EINVAL return would be coherent.
Okay sure.
> It would probably also be better to replace your condition with
> if (rproc->state != RPROC_RUNNING)
Will do.
>
>
> [1] https://elixir.bootlin.com/linux/latest/source/drivers/remoteproc/remoteproc_sysfs.c#L104
>
> Regards,
> Arnaud
>
>> Thanks,
>> Sid
>>
>>>>>> +
>>>>>> + rproc_shutdown(rproc);
>>>>>> + } else {
>>>>>> + dev_err(&rproc->dev, "Unrecognized option\n");
>>>>>> + ret = -EINVAL;
>>>>>> + }
>>>>>> +
>>>>>> + return ret ? ret : len;
>>>>>> +}
>>>>>> +
>>>>>> +static long rproc_device_ioctl(struct file *filp, unsigned int ioctl,
>>>>>> + unsigned long arg)
>>>>>> +{
>>>>>> + struct rproc *rproc = container_of(filp->f_inode->i_cdev,
>>>>>> + struct rproc, char_dev);
>>>>>> + void __user *argp = (void __user *)arg;
>>>>>> + int ret;
>>>>>> + bool param;
>>>>>> +
>>>>>> + switch (ioctl) {
>>>>>> + case RPROC_SET_SHUTDOWN_ON_RELEASE:
>>>>>> + ret = copy_from_user(¶m, argp, sizeof(bool));
>>>>>> + if (ret) {
>>>>>> + dev_err(&rproc->dev, "Data copy from userspace failed\n");
>>>>>> + return -EINVAL;
>>>>>> + }
>>>>>> + rproc->cdev_put_on_release = param;
>>>>> argp is an void value, where cdev_put_on_release is a bool a check or
>>>>> a conversion seems
>>>>> missing
>>>>>
>>>>>> + break;
>>>>>> + case RPROC_GET_SHUTDOWN_ON_RELEASE:
>>>>>> + ret = copy_to_user(argp, &rproc->cdev_put_on_release,
>>>>>> + sizeof(bool));
>>>>>> + if (ret) {
>>>>>> + dev_err(&rproc->dev, "Data copy to userspace failed\n");
>>>>>> + return -EINVAL;
>>>>>> + }
>>>>>> + break;
>>>>>> + default:
>>>>>> + dev_err(&rproc->dev, "Unsupported ioctl\n");
>>>>>> + return -EINVAL;
>>>>>> + }
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static int rproc_cdev_release(struct inode *inode, struct file *filp)
>>>>>> +{
>>>>>> + struct rproc *rproc = container_of(inode->i_cdev, struct rproc,
>>>>>> + char_dev);
>>>>>> +
>>>>>> + if (rproc->cdev_put_on_release && rproc->state != RPROC_OFFLINE)
>>>>>> + rproc_shutdown(rproc);
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +
>>>>>> +static const struct file_operations rproc_fops = {
>>>>>> + .write = rproc_cdev_write,
>>>>>> + .unlocked_ioctl = rproc_device_ioctl,
>>>>>> + .release = rproc_cdev_release,
>>>>>> +};
>>>>>> +
>>>>>> +int rproc_char_device_add(struct rproc *rproc)
>>>>>> +{
>>>>>> + int ret;
>>>>>> + dev_t cdevt;
>>>>>> +
>>>>>> + cdev_init(&rproc->char_dev, &rproc_fops);
>>>>>> + rproc->char_dev.owner = THIS_MODULE;
>>>>>> +
>>>>>> + cdevt = MKDEV(MAJOR(rproc_major), rproc->index);
>>>>>> + ret = cdev_add(&rproc->char_dev, cdevt, 1);
>>>>>> + if (ret < 0)
>>>>>> + goto out;
>>>>>> +
>>>>>> + rproc->dev.devt = cdevt;
>>>>>> +out:
>>>>>> + return ret;
>>>>>> +}
>>>>>> +
>>>>>> +void rproc_char_device_remove(struct rproc *rproc)
>>>>>> +{
>>>>>> + __unregister_chrdev(MAJOR(rproc->dev.devt), rproc->index, 1,
>>>>>> "rproc");
>>>>>> +}
>>>>>> +
>>>>>> +void __init rproc_init_cdev(void)
>>>>>> +{
>>>>>> + int ret;
>>>>>> +
>>>>>> + ret = alloc_chrdev_region(&rproc_major, 0, NUM_RPROC_DEVICES,
>>>>>> "rproc");
>>>>> "remoteproc"instead of "rproc" (in line with sysfs and debugfs naming)
>>>>> .
>>>>>
>>>>>> + if (ret < 0)
>>>>>> + pr_err("Failed to alloc rproc_cdev region, err %d\n", ret);
>>>>>> +}
>>>>>> +
>>>>>> +void __exit rproc_exit_cdev(void)
>>>>>> +{
>>>>>> + unregister_chrdev_region(MKDEV(MAJOR(rproc_major), 0),
>>>>>> + NUM_RPROC_DEVICES);
>>>>>> +}
>>>>>> diff --git a/drivers/remoteproc/remoteproc_internal.h
>>>>>> b/drivers/remoteproc/remoteproc_internal.h
>>>>>> index 493ef92..fb9d891 100644
>>>>>> --- a/drivers/remoteproc/remoteproc_internal.h
>>>>>> +++ b/drivers/remoteproc/remoteproc_internal.h
>>>>>> @@ -47,6 +47,27 @@ struct dentry *rproc_create_trace_file(const char
>>>>>> *name, struct rproc *rproc,
>>>>>> int rproc_init_sysfs(void);
>>>>>> void rproc_exit_sysfs(void);
>>>>>>
>>>>>> +#ifdef CONFIG_REMOTEPROC_CDEV
>>>>>> +void rproc_init_cdev(void);
>>>>>> +void rproc_exit_cdev(void);
>>>>>> +int rproc_char_device_add(struct rproc *rproc);
>>>>>> +void rproc_char_device_remove(struct rproc *rproc);
>>>>>> +#else
>>>>>> +static inline void rproc_init_cdev(void)
>>>>>> +{
>>>>>> +}
>>>>>> +static inline void rproc_exit_cdev(void)
>>>>>> +{
>>>>>> +}
>>>>>> +static inline int rproc_char_device_add(struct rproc *rproc)
>>>>>> +{
>>>>>> + return 0;
>>>>>> +}
>>>>>> +static inline void rproc_char_device_remove(struct rproc *rproc)
>>>>>> +{
>>>>>> +}
>>>>>> +#endif
>>>>>> +
>>>>>> void rproc_free_vring(struct rproc_vring *rvring);
>>>>>> int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
>>>>>>
>>>>>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>>>>>> index 16ad666..9bd2ff5 100644
>>>>>> --- a/include/linux/remoteproc.h
>>>>>> +++ b/include/linux/remoteproc.h
>>>>>> @@ -40,6 +40,7 @@
>>>>>> #include <linux/virtio.h>
>>>>>> #include <linux/completion.h>
>>>>>> #include <linux/idr.h>
>>>>>> +#include <linux/cdev.h>
>>>>>> #include <linux/of.h>
>>>>>>
>>>>>> /**
>>>>>> @@ -514,6 +515,8 @@ struct rproc {
>>>>>> bool auto_boot;
>>>>>> struct list_head dump_segments;
>>>>>> int nb_vdev;
>>>>>> + struct cdev char_dev;
>>>>>> + bool cdev_put_on_release;
>>>>>> };
>>>>> These parameters are local variables of rproc_cdev. Could be defined
>>>>> in a separate structure.
>>>>> with a pointer in rproc to this structure.
>>>>>
>>>>>> /**
>>>>>> diff --git a/include/uapi/linux/remoteproc_cdev.h
>>>>>> b/include/uapi/linux/remoteproc_cdev.h
>>>>>> new file mode 100644
>>>>>> index 0000000..3975120
>>>>>> --- /dev/null
>>>>>> +++ b/include/uapi/linux/remoteproc_cdev.h
>>>>>> @@ -0,0 +1,20 @@
>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
>>>>>> +/*
>>>>>> + * IOCTLs for Remoteproc's character device interface.
>>>>>> + *
>>>>>> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
>>>>>> + */
>>>>>> +
>>>>>> +
>>>>>> +#ifndef _UAPI_REMOTEPROC_CDEV_H_
>>>>>> +#define _UAPI_REMOTEPROC_CDEV_H_
>>>>>> +
>>>>>> +#include <linux/ioctl.h>
>>>>>> +#include <linux/types.h>
>>>>>> +
>>>>>> +#define RPROC_MAGIC 0xB7
>>>>>> +
>>>>>> +#define RPROC_SET_SHUTDOWN_ON_RELEASE _IOW(RPROC_MAGIC, 1, int)
>>>>>> +#define RPROC_GET_SHUTDOWN_ON_RELEASE _IOR(RPROC_MAGIC, 2, int)
>>>>>> +
>>>>>> +#endif
>>>>>>
>>>>> IOCTLs should probaly be documented.
>>>> I have added documentation to
>>>> Documentation/userspace-api/ioctl/ioctl-number.rst
>>>> Is there another place where I need to add documentation for this?
>>> Could you add in this file comments that describe
>>> the IOCTL usage and associated parameter?
>>>
>>> Regards,
>>> Arnaud
I don't see any for of comments that describe in detail the IOCTL usage,
i.e.,
input parameters, etc. Could you provide an example so I can follow it?
If not, should I instead put them in Documentation/remoteproc.txt?
Thanks,
Sid
>>>
>>>>> Thanks,
>>>>> Arnaud
Powered by blists - more mailing lists