| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200630221710.GM2365286@oden.dyn.berto.se>
Date: Wed, 1 Jul 2020 00:17:10 +0200
From: Niklas Söderlund
<niklas.soderlund@...natech.se>
To: Michael Rodin <mrodin@...adit-jv.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, michael@...in.online,
efriedrich@...adit-jv.com, erosca@...adit-jv.com
Subject: Re: [PATCH 1/2] [RFC] media: rcar-vin: send a V4L2 event to vdev if
no frame captured after a timeout
Hi Michael,
Thanks for your RFC.
On 2020-06-19 19:46:10 +0200, Michael Rodin wrote:
> Data flow from an upstream subdevice can stop permanently due to:
> - CSI2 transmission errors
> - silent failure of the source subdevice
> - disconnection of the source subdevice
> In those cases userspace waits for new buffers for an infinitely long time.
> In order to address this issue, use a timer to monitor, that rvin_irq() is
> capturing at least one frame within a IRQ_TIMEOUT_MS period. Otherwise send
> a new private v4l2 event to userspace. This event is exported to userspace
> via a new uapi header.
I think there is value for user-space to detecting the error cases
above. But I think the problem could be addressed at a different lever.
Defining a VIN specific events and controls for something that applies
any video device might not be the neatest solution.
Another thing hits me when reading this series, could this not be done
in user-space? In 2/2 you add a control which sets the timeout based on
the framerate, so user-space must know about that to be able to set the
control. User-space also knows when it receives/dequeus a buffer from
the video device so the timeout logic could be implemented in the
application. Given that the application anyhow needs special care to
handle the VIN specific event and control I wonder if it's not neater to
make it handle all of it. Do you see any specific benefit of having
parts of it in the driver?
>
> Signed-off-by: Michael Rodin <mrodin@...adit-jv.com>
> ---
> drivers/media/platform/rcar-vin/rcar-dma.c | 21 +++++++++++++++++++++
> drivers/media/platform/rcar-vin/rcar-v4l2.c | 1 +
> drivers/media/platform/rcar-vin/rcar-vin.h | 6 ++++++
> include/uapi/linux/rcar-vin.h | 10 ++++++++++
> 4 files changed, 38 insertions(+)
> create mode 100644 include/uapi/linux/rcar-vin.h
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index 1a30cd0..bf8d733 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -937,6 +937,20 @@ static void rvin_capture_stop(struct rvin_dev *vin)
> #define RVIN_TIMEOUT_MS 100
> #define RVIN_RETRIES 10
>
> +static const struct v4l2_event rvin_irq_timeout = {
> + .type = V4L2_EVENT_RCAR_VIN_IRQ_TIMEOUT,
> +};
> +
> +static void rvin_irq_timer_function(struct timer_list *timer)
> +{
> + struct rvin_dev *vin = container_of(timer, struct rvin_dev,
> + irq_timer);
> +
> + vin_err(vin, "%s: frame completion timeout after %i ms!\n",
> + __func__, IRQ_TIMEOUT_MS);
> + v4l2_event_queue(&vin->vdev, &rvin_irq_timeout);
> +}
> +
> static irqreturn_t rvin_irq(int irq, void *data)
> {
> struct rvin_dev *vin = data;
> @@ -1008,6 +1022,8 @@ static irqreturn_t rvin_irq(int irq, void *data)
> vin_dbg(vin, "Dropping frame %u\n", vin->sequence);
> }
>
> + mod_timer(&vin->irq_timer, jiffies + msecs_to_jiffies(IRQ_TIMEOUT_MS));
> +
> vin->sequence++;
>
> /* Prepare for next frame */
> @@ -1252,6 +1268,8 @@ static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
> if (ret)
> dma_free_coherent(vin->dev, vin->format.sizeimage, vin->scratch,
> vin->scratch_phys);
> + else
> + mod_timer(&vin->irq_timer, jiffies + msecs_to_jiffies(IRQ_TIMEOUT_MS));
>
> return ret;
> }
> @@ -1305,6 +1323,8 @@ static void rvin_stop_streaming(struct vb2_queue *vq)
> /* Free scratch buffer. */
> dma_free_coherent(vin->dev, vin->format.sizeimage, vin->scratch,
> vin->scratch_phys);
> +
> + del_timer_sync(&vin->irq_timer);
> }
>
> static const struct vb2_ops rvin_qops = {
> @@ -1370,6 +1390,7 @@ int rvin_dma_register(struct rvin_dev *vin, int irq)
> goto error;
> }
>
> + timer_setup(&vin->irq_timer, rvin_irq_timer_function, 0);
> return 0;
> error:
> rvin_dma_unregister(vin);
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index f421e25..c644134 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -581,6 +581,7 @@ static int rvin_subscribe_event(struct v4l2_fh *fh,
> {
> switch (sub->type) {
> case V4L2_EVENT_SOURCE_CHANGE:
> + case V4L2_EVENT_RCAR_VIN_IRQ_TIMEOUT:
> return v4l2_event_subscribe(fh, sub, 4, NULL);
> }
> return v4l2_ctrl_subscribe_event(fh, sub);
> diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
> index c19d077..7408f67 100644
> --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> @@ -14,12 +14,14 @@
> #define __RCAR_VIN__
>
> #include <linux/kref.h>
> +#include <linux/rcar-vin.h>
>
> #include <media/v4l2-async.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-dev.h>
> #include <media/v4l2-device.h>
> #include <media/videobuf2-v4l2.h>
> +#include <media/v4l2-event.h>
>
> /* Number of HW buffers */
> #define HW_BUFFER_NUM 3
> @@ -30,6 +32,8 @@
> /* Max number on VIN instances that can be in a system */
> #define RCAR_VIN_NUM 8
>
> +#define IRQ_TIMEOUT_MS 1000
> +
> struct rvin_group;
>
> enum model_id {
> @@ -196,6 +200,7 @@ struct rvin_info {
> * @compose: active composing
> * @src_rect: active size of the video source
> * @std: active video standard of the video source
> + * @irq_timer: monitors regular capturing of frames in rvin_irq()
> *
> * @alpha: Alpha component to fill in for supported pixel formats
> */
> @@ -240,6 +245,7 @@ struct rvin_dev {
> struct v4l2_rect src_rect;
> v4l2_std_id std;
>
> + struct timer_list irq_timer;
> unsigned int alpha;
> };
>
> diff --git a/include/uapi/linux/rcar-vin.h b/include/uapi/linux/rcar-vin.h
> new file mode 100644
> index 00000000..4eb7f5e
> --- /dev/null
> +++ b/include/uapi/linux/rcar-vin.h
> @@ -0,0 +1,10 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +
> +#ifndef RCAR_VIN_USER_H
> +#define RCAR_VIN_USER_H
> +
> +/* class for events sent by the rcar-vin driver */
> +#define V4L2_EVENT_RCAR_VIN_CLASS V4L2_EVENT_PRIVATE_START
> +#define V4L2_EVENT_RCAR_VIN_IRQ_TIMEOUT (V4L2_EVENT_RCAR_VIN_CLASS | 0x1)
> +
> +#endif /* RCAR_VIN_USER_H */
> --
> 2.7.4
>
--
Regards,
Niklas Söderlund
Powered by blists - more mailing lists