| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 2 Jul 2020 04:29:36 +0900
From: Masahiro Yamada <masahiroy@...nel.org>
To: linux-kbuild@...r.kernel.org
Cc: Sam Ravnborg <sam@...nborg.org>, linux-kernel@...r.kernel.org,
Chris Zankel <chris@...kel.net>,
Max Filippov <jcmvbkbc@...il.com>,
linux-xtensa@...ux-xtensa.org, Guan Xuetao <gxt@....edu.cn>,
Nick Desaulniers <ndesaulniers@...gle.com>,
Masahiro Yamada <masahiroy@...nel.org>,
Michal Marek <michal.lkml@...kovi.net>
Subject: [PATCH] kbuild: do not export LDFLAGS_vmlinux
When you clean the build tree for ARCH=arm, you may see the following
error message:
$ make -j24 ARCH=arm clean
CLEAN arch/arm/crypto
CLEAN arch/arm/kernel
CLEAN arch/arm/mach-at91
CLEAN arch/arm/mach-omap2
CLEAN arch/arm/vdso
CLEAN certs
CLEAN lib
CLEAN usr
CLEAN net/wireless
CLEAN drivers/firmware/efi/libstub
nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file
/bin/sh: 1: arithmetic expression: expecting primary: " "
CLEAN arch/arm/boot/compressed
CLEAN drivers/scsi
CLEAN drivers/tty/vt
CLEAN arch/arm/boot
CLEAN vmlinux.symvers modules.builtin modules.builtin.modinfo
Even if you run the same command again, the error message is not shown
despite vmlinux is already gone.
To reproduce it, the parallel option -j is needed. Single thread
cleaning always executes 'archclean', 'vmlinuxclean' in this order,
so vmlinux still exists when arch/arm/boot/compressed/ is cleaned.
Looking at arch/arm/boot/compressed/Makefile does not help understand
the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are
assigned with '=' operator, hence, they are not expanded until they are
used. Obviously, 'make clean' does not use them.
In fact, the root cause exists in the top Makefile:
export LDFLAGS_vmlinux
Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in
arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean
has a command to execute. This is why the error message shows up only
when there exist build artifacts in arch/arm/boot/compressed/.
Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile
will fix it as far as ARCH=arm is concerned, but I believe the proper
fix is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile.
LDFLAGS_vmlinux in the top Makefile contains linker flags for the top
vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for
arch/arm/boot/compressed/vmlinux. They just happen to have the same
variable name, but are used for different purposes. Exporting the former
bothers the decompressor Makefiles.
This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a
command line parameter instead of via an environment variable. LD and
KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway,
they must be included in cmd_link-vmlinux to allow if_changed to detect
the changes in LD or KBUILD_LDFLAGS.
The following Makefiles are not affected:
arch/arm/boot/compressed/Makefile
arch/h8300/boot/compressed/Makefile
arch/nios2/boot/compressed/Makefile
arch/parisc/boot/compressed/Makefile
arch/s390/boot/compressed/Makefile
arch/sh/boot/compressed/Makefile
arch/sh/boot/romimage/Makefile
arch/x86/boot/compressed/Makefile
They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the
top Makefile.
We need to take a closer look at the impact to unicore32 and xtensa.
arch/unicore32/boot/compressed/Makefile only uses '+=' operator for
LDFLAGS_vmlinux. So, the decompressor previously inherited the linker
flags from the top Makefile.
However, commit 70fac51feaf2 ("unicore32 additional architecture files:
boot process") was merged before commit 1f2bfbd00e46 ("kbuild: link of
vmlinux moved to a script"). So, I believe this is rather a bug fix of
1f2bfbd00e46.
arch/xtensa/boot/boot-elf/Makefile is also affected, but this is a fix
for the same reason. It did not inherit LDFLAGS_vmlinux when commit
4bedea945451 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa
Part 2") was merged. I deleted $(LDFLAGS_vmlinux), which is now empty.
Signed-off-by: Masahiro Yamada <masahiroy@...nel.org>
---
Makefile | 3 +--
arch/xtensa/boot/boot-elf/Makefile | 2 +-
scripts/link-vmlinux.sh | 4 ++++
3 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile
index 5496a32dffa6..075f2f943180 100644
--- a/Makefile
+++ b/Makefile
@@ -1100,7 +1100,6 @@ KBUILD_VMLINUX_OBJS += $(patsubst %/,%/built-in.a, $(drivers-y))
export KBUILD_VMLINUX_OBJS KBUILD_VMLINUX_LIBS
export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds
-export LDFLAGS_vmlinux
# used by scripts/Makefile.package
export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) LICENSES arch include scripts tools)
@@ -1132,7 +1131,7 @@ ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
# Final link of vmlinux with optional arch pass after final link
cmd_link-vmlinux = \
- $(CONFIG_SHELL) $< $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_vmlinux) ; \
+ $(CONFIG_SHELL) $< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)"; \
$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
vmlinux: scripts/link-vmlinux.sh autoksyms_recursive $(vmlinux-deps) FORCE
diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile
index 12ae1e91cb75..c6538d3321b9 100644
--- a/arch/xtensa/boot/boot-elf/Makefile
+++ b/arch/xtensa/boot/boot-elf/Makefile
@@ -25,7 +25,7 @@ $(obj)/Image.o: vmlinux.bin $(OBJS)
$(OBJS) $@
$(obj)/../Image.elf: $(obj)/Image.o $(obj)/boot.lds
- $(Q)$(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_vmlinux) \
+ $(LD) $(KBUILD_LDFLAGS) \
-T $(obj)/boot.lds \
--build-id=none \
-o $@ $(obj)/Image.o
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 7eaf70d58488..16c7818b3e19 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -30,6 +30,10 @@
# Error out on error
set -e
+LD="$1"
+KBUILD_LDFLAGS="$2"
+LDFLAGS_vmlinux="$3"
+
# Nice output in kbuild format
# Will be supressed by "make -s"
info()
--
2.25.1
Powered by blists - more mailing lists