[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200701130129.30961-1-benjamin.gaignard@st.com>
Date: Wed, 1 Jul 2020 15:01:26 +0200
From: Benjamin Gaignard <benjamin.gaignard@...com>
To: <hugues.fruchet@...com>, <mchehab@...nel.org>,
<mcoquelin.stm32@...il.com>, <alexandre.torgue@...com>,
<robh+dt@...nel.org>
CC: <linux-media@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <vincent.guittot@...aro.org>,
<valentin.schneider@....com>, <rjw@...ysocki.net>,
<devicetree@...r.kernel.org>,
Benjamin Gaignard <benjamin.gaignard@...com>
Subject: [PATCH v7 0/3] DCMI set minimum cpufreq requirement
This series allow to STM32 camera interface (DCMI) to require a minimum
frequency to the CPUs before start streaming frames from the sensor.
The minimum frequency requirement is provided in the devide-tree node.
Setting a minimum frequency for the CPUs is needed to ensure a quick handling
of the interrupts between two sensor frames and avoid dropping half of them.
version 7:
- rebase on v5.8-rc3
- add reviewed and ack-by
- fix test condition
version 6:
- come back to version 4 and follow Valentin's suggestions about notifier
version 5:
- add a mutex to protect dcmi_irq_notifier_notify()
- register notifier a probe time
version 4:
- simplify irq affinity handling by using only dcmi_irq_notifier_notify()
version 3:
- add a cpumask field to track boosted CPUs
- add irq_affinity_notify callback
- protect cpumask field with a mutex
Benjamin Gaignard (3):
dt-bindings: media: stm32-dcmi: Add DCMI min frequency property
media: stm32-dcmi: Set minimum cpufreq requirement
ARM: dts: stm32: Set DCMI frequency requirement for stm32mp15x
.../devicetree/bindings/media/st,stm32-dcmi.yaml | 8 ++
arch/arm/boot/dts/stm32mp151.dtsi | 1 +
drivers/media/platform/stm32/stm32-dcmi.c | 138 +++++++++++++++++++--
3 files changed, 139 insertions(+), 8 deletions(-)
--
2.15.0
Powered by blists - more mailing lists