lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJMQK-iocK5eH9QTQQKNFHtBvpc1C2=U=3kFPXkXiUOiRxrucA@mail.gmail.com>
Date:   Thu, 2 Jul 2020 13:06:55 +0800
From:   Hsin-Yi Wang <hsinyi@...omium.org>
To:     Enric Balletbo i Serra <enric.balletbo@...labora.com>
Cc:     lkml <linux-kernel@...r.kernel.org>,
        Collabora Kernel ML <kernel@...labora.com>,
        erwanaliasr1@...il.com, Matthias Brugger <matthias.bgg@...il.com>,
        Nicolas Boichat <drinkcat@...omium.org>,
        Rob Herring <robh+dt@...nel.org>,
        Devicetree List <devicetree@...r.kernel.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH v2 6/7] arm64: dts: mt8183: Add USB3.0 support

On Thu, Jun 25, 2020 at 6:18 PM Enric Balletbo i Serra
<enric.balletbo@...labora.com> wrote:
>
> Add the USB3.0 phyter and controller for the MediaTek's MT8183 SoC.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
Tested-by: Hsin-Yi Wang <hsinyi@...omium.org>
> ---
>
> Changes in v2:
> - Move adding #phy-cells to this patch. (Matthias Brugger)
>
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi | 58 ++++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 6c00ffa275202..102105871db25 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -9,6 +9,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/reset-controller/mt8183-resets.h>
> +#include <dt-bindings/phy/phy.h>
>  #include "mt8183-pinfunc.h"
>
>  / {
> @@ -648,6 +649,36 @@ i2c8: i2c@...1b000 {
>                         status = "disabled";
>                 };
>
> +               ssusb: usb@...01000 {
> +                       compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
> +                       reg = <0 0x11201000 0 0x2e00>,
> +                             <0 0x11203e00 0 0x0100>;
> +                       reg-names = "mac", "ippc";
> +                       interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> +                       phys = <&u2port0 PHY_TYPE_USB2>,
> +                              <&u3port0 PHY_TYPE_USB3>;
> +                       clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
> +                                <&infracfg CLK_INFRA_USB>;
> +                       clock-names = "sys_ck", "ref_ck";
> +                       mediatek,syscon-wakeup = <&pericfg 0x400 0>;
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       status = "disabled";
> +
> +                       usb_host: xhci@...00000 {
> +                               compatible = "mediatek,mt8183-xhci",
> +                                            "mediatek,mtk-xhci";
> +                               reg = <0 0x11200000 0 0x1000>;
> +                               reg-names = "mac";
> +                               interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
> +                               clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
> +                                        <&infracfg CLK_INFRA_USB>;
> +                               clock-names = "sys_ck", "ref_ck";
> +                               status = "disabled";
> +                       };
> +               };
> +
>                 audiosys: syscon@...20000 {
>                         compatible = "mediatek,mt8183-audiosys", "syscon";
>                         reg = <0 0x11220000 0 0x1000>;
> @@ -684,6 +715,33 @@ efuse: efuse@...10000 {
>                         reg = <0 0x11f10000 0 0x1000>;
>                 };
>
> +               u3phy: usb-phy@...40000 {
> +                       compatible = "mediatek,mt8183-tphy",
> +                                    "mediatek,generic-tphy-v2";
> +                       #address-cells = <1>;
> +                       #phy-cells = <1>;
> +                       #size-cells = <1>;
> +                       ranges = <0 0 0x11f40000 0x1000>;
> +                       status = "okay";
> +
> +                       u2port0: usb-phy@0 {
> +                               reg = <0x0 0x700>;
> +                               clocks = <&clk26m>;
> +                               clock-names = "ref";
> +                               #phy-cells = <1>;
> +                               mediatek,discth = <15>;
> +                               status = "okay";
> +                       };
> +
> +                       u3port0: usb-phy@...0 {
> +                               reg = <0x0700 0x900>;
> +                               clocks = <&clk26m>;
> +                               clock-names = "ref";
> +                               #phy-cells = <1>;
> +                               status = "okay";
> +                       };
> +               };
> +
>                 mfgcfg: syscon@...00000 {
>                         compatible = "mediatek,mt8183-mfgcfg", "syscon";
>                         reg = <0 0x13000000 0 0x1000>;
> --
> 2.27.0
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ