linux-kernel - Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMuHMdVdCH-r-xMnDgUYzJfDCzUJCYt8CkSDp9E=tgfP01FrKw@mail.gmail.com>
Date:   Thu, 2 Jul 2020 11:23:42 +0200
From:   Geert Uytterhoeven <geert@...ux-m68k.org>
To:     "Lad, Prabhakar" <prabhakar.csengg@...il.com>
Cc:     Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
        "open list:SERIAL DRIVERS" <linux-serial@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console

Hi Prabhakar,

On Wed, Jul 1, 2020 at 7:28 PM Lad, Prabhakar
<prabhakar.csengg@...il.com> wrote:
> On Wed, Jul 1, 2020 at 6:17 PM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> > On Wed, Jul 1, 2020 at 5:42 PM Lad Prabhakar
> > <prabhakar.mahadev-lad.rj@...renesas.com> wrote:
> > > serial core expects the spinlock to be initialized by the controller
> > > driver for serial console, this patch makes sure the spinlock is
> > > initialized, fixing the below issue:
> > >
> > > [    0.865928] BUG: spinlock bad magic on CPU#0, swapper/0/1
> > > [    0.865945]  lock: sci_ports+0x0/0x4c80, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
> > > [    0.865955] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc1+ #112
> > > [    0.865961] Hardware name: HopeRun HiHope RZ/G2H with sub board (DT)
> > > [    0.865968] Call trace:
> > > [    0.865979]  dump_backtrace+0x0/0x1d8
> > > [    0.865985]  show_stack+0x14/0x20
> > > [    0.865996]  dump_stack+0xe8/0x130
> > > [    0.866006]  spin_dump+0x6c/0x88
> > > [    0.866012]  do_raw_spin_lock+0xb0/0xf8
> > > [    0.866023]  _raw_spin_lock_irqsave+0x80/0xa0
> > > [    0.866032]  uart_add_one_port+0x3a4/0x4e0
> > > [    0.866039]  sci_probe+0x504/0x7c8
> > > [    0.866048]  platform_drv_probe+0x50/0xa0
> > > [    0.866059]  really_probe+0xdc/0x330
> > > [    0.866066]  driver_probe_device+0x58/0xb8
> > > [    0.866072]  device_driver_attach+0x6c/0x90
> > > [    0.866078]  __driver_attach+0x88/0xd0
> > > [    0.866085]  bus_for_each_dev+0x74/0xc8
> > > [    0.866091]  driver_attach+0x20/0x28
> > > [    0.866098]  bus_add_driver+0x14c/0x1f8
> > > [    0.866104]  driver_register+0x60/0x110
> > > [    0.866109]  __platform_driver_register+0x40/0x48
> > > [    0.866119]  sci_init+0x2c/0x34
> > > [    0.866127]  do_one_initcall+0x88/0x428
> > > [    0.866137]  kernel_init_freeable+0x2c0/0x328
> > > [    0.866143]  kernel_init+0x10/0x108
> > > [    0.866150]  ret_from_fork+0x10/0x18
> >
> > Interesting...
> >
> > How can I reproduce that? I do have CONFIG_DEBUG_SPINLOCK=y.
> > I'm wondering why haven't we seen this before...
> >
> I have attached .config for your reference.

Thank you!

I gave it a try with v5.8-rc1 on Salvator-XS with R-Car H3 ES2.0.
However, I couldn't reproduce the issue.
Does it happen on that specific board only? Is this serdev-related?
Note that I had to disable CONFIG_EXTRA_FIRMWARE, as I don't have the
firmware blobs it referenced.  Do I need them to trigger the issue?
As the .config has a few non-upstream options, do you have any patches
applied that might impact the issue?

Thanks again!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds