[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200702112041.1942707-2-megous@megous.com>
Date: Thu, 2 Jul 2020 13:20:38 +0200
From: Ondrej Jirman <megous@...ous.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>
Cc: Ondrej Jirman <megous@...ous.com>, Luca Weiss <luca@...tu.xyz>,
Tomas Novotny <tomas@...otny.cz>, linux-input@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v3 1/4] dt-bindings: input: gpio-vibrator: Don't require enable-gpios
It is possible to turn the motor on/off just by enabling/disabling
the vcc-supply. Change the binding to require either enable-gpios
or vcc-supply or both.
Signed-off-by: Ondrej Jirman <megous@...ous.com>
---
Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
index 2384465eaa19..082ac06471db 100644
--- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -24,7 +24,12 @@ properties:
required:
- compatible
- - enable-gpios
+
+anyOf:
+ - required:
+ - enable-gpios
+ - required:
+ - vcc-supply
additionalProperties: false
--
2.27.0
Powered by blists - more mailing lists