linux-kernel - Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 2 Jul 2020 12:42:01 +0100
From:   "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To:     Geert Uytterhoeven <geert@...ux-m68k.org>
Cc:     Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
        "open list:SERIAL DRIVERS" <linux-serial@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [PATCH] serial: sh-sci: Initialize spinlock for uart console

Hi Geert,

On Thu, Jul 2, 2020 at 11:49 AM Lad, Prabhakar
<prabhakar.csengg@...il.com> wrote:
>
> Hi Geert,
>
> On Thu, Jul 2, 2020 at 10:23 AM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> >
> > Hi Prabhakar,
> >
> > On Wed, Jul 1, 2020 at 7:28 PM Lad, Prabhakar
> > <prabhakar.csengg@...il.com> wrote:
> > > On Wed, Jul 1, 2020 at 6:17 PM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> > > > On Wed, Jul 1, 2020 at 5:42 PM Lad Prabhakar
> > > > <prabhakar.mahadev-lad.rj@...renesas.com> wrote:
> > > > > serial core expects the spinlock to be initialized by the controller
> > > > > driver for serial console, this patch makes sure the spinlock is
> > > > > initialized, fixing the below issue:
> > > > >
> > > > > [    0.865928] BUG: spinlock bad magic on CPU#0, swapper/0/1
> > > > > [    0.865945]  lock: sci_ports+0x0/0x4c80, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
> > > > > [    0.865955] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc1+ #112
> > > > > [    0.865961] Hardware name: HopeRun HiHope RZ/G2H with sub board (DT)
> > > > > [    0.865968] Call trace:
> > > > > [    0.865979]  dump_backtrace+0x0/0x1d8
> > > > > [    0.865985]  show_stack+0x14/0x20
> > > > > [    0.865996]  dump_stack+0xe8/0x130
> > > > > [    0.866006]  spin_dump+0x6c/0x88
> > > > > [    0.866012]  do_raw_spin_lock+0xb0/0xf8
> > > > > [    0.866023]  _raw_spin_lock_irqsave+0x80/0xa0
> > > > > [    0.866032]  uart_add_one_port+0x3a4/0x4e0
> > > > > [    0.866039]  sci_probe+0x504/0x7c8
> > > > > [    0.866048]  platform_drv_probe+0x50/0xa0
> > > > > [    0.866059]  really_probe+0xdc/0x330
> > > > > [    0.866066]  driver_probe_device+0x58/0xb8
> > > > > [    0.866072]  device_driver_attach+0x6c/0x90
> > > > > [    0.866078]  __driver_attach+0x88/0xd0
> > > > > [    0.866085]  bus_for_each_dev+0x74/0xc8
> > > > > [    0.866091]  driver_attach+0x20/0x28
> > > > > [    0.866098]  bus_add_driver+0x14c/0x1f8
> > > > > [    0.866104]  driver_register+0x60/0x110
> > > > > [    0.866109]  __platform_driver_register+0x40/0x48
> > > > > [    0.866119]  sci_init+0x2c/0x34
> > > > > [    0.866127]  do_one_initcall+0x88/0x428
> > > > > [    0.866137]  kernel_init_freeable+0x2c0/0x328
> > > > > [    0.866143]  kernel_init+0x10/0x108
> > > > > [    0.866150]  ret_from_fork+0x10/0x18
> > > >
> > > > Interesting...
> > > >
> > > > How can I reproduce that? I do have CONFIG_DEBUG_SPINLOCK=y.
> > > > I'm wondering why haven't we seen this before...
> > > >
> > > I have attached .config for your reference.
> >
> > Thank you!
> >
> > I gave it a try with v5.8-rc1 on Salvator-XS with R-Car H3 ES2.0.
> > However, I couldn't reproduce the issue.
> > Does it happen on that specific board only? Is this serdev-related?
> > Note that I had to disable CONFIG_EXTRA_FIRMWARE, as I don't have the
> > firmware blobs it referenced.  Do I need them to trigger the issue?
> > As the .config has a few non-upstream options, do you have any patches
> > applied that might impact the issue?
> >
> Can't think of any patches that might cause an issue, most of it are
> just the DT's and config additions. Nor do firmware blobs should
> affect it. I'll try and reproduce it on M3N and get back to you.
>
I did manage to replicate this issue on M3N (v5.8-rc3 tag with no
modifications), I have attached the config file and also the boot log
without this patch for your reference, after applying this patch I no
more see this issue.

Cheers,
--Prabhakar

> Cheers,
> --Prabhakar
>
> > Thanks again!
> >
> > Gr{oetje,eeting}s,
> >
> >                         Geert
> >
> > --
> > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
> >
> > In personal conversations with technical people, I call myself a hacker. But
> > when I'm talking to journalists I just say "programmer" or something like that.
> >                                 -- Linus Torvalds

View attachment "m3nlog.txt" of type "text/plain" (35527 bytes)

Download attachment "serial_config" of type "application/octet-stream" (157440 bytes)