| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200703044127.27438-7-chao.hao@mediatek.com>
Date: Fri, 3 Jul 2020 12:41:23 +0800
From: Chao Hao <chao.hao@...iatek.com>
To: Joerg Roedel <joro@...tes.org>, Rob Herring <robh+dt@...nel.org>,
"Matthias Brugger" <matthias.bgg@...il.com>
CC: <iommu@...ts.linux-foundation.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>, <wsd_upstream@...iatek.com>,
Chao Hao <chao.hao@...iatek.com>,
FY Yang <fy.yang@...iatek.com>, Yong Wu <yong.wu@...iatek.com>,
TH Yang <th.yang@...iatek.com>
Subject: [PATCH v6 06/10] iommu/mediatek: Add sub_comm id in translation fault
The max larb number that a iommu HW support is 8(larb0~larb7 in the below
diagram).
If the larb's number is over 8, we use a sub_common for merging
several larbs into one larb. At this case, we will extend larb_id:
bit[11:9] means common-id;
bit[8:7] means subcommon-id;
From these two variables, we could get the real larb number when
translation fault happen.
The diagram is as below:
EMI
|
IOMMU
|
-----------------
| |
common1 common0
| |
-----------------
|
smi common
|
------------------------------------
| | | | | |
3'd0 3'd1 3'd2 3'd3 ... 3'd7 <-common_id(max is 8)
| | | | | |
Larb0 Larb1 | Larb3 ... Larb7
|
smi sub common
|
--------------------------
| | | |
2'd0 2'd1 2'd2 2'd3 <-sub_common_id(max is 4)
| | | |
Larb8 Larb9 Larb10 Larb11
In this patch we extend larb_remap[] to larb_remap[8][4] for this.
larb_remap[x][y]: x means common-id above, y means subcommon_id above.
We can also distinguish if the M4U HW has sub_common by HAS_SUB_COMM
macro.
Cc: Matthias Brugger <matthias.bgg@...il.com>
Signed-off-by: Chao Hao <chao.hao@...iatek.com>
Reviewed-by: Yong Wu <yong.wu@...iatek.com>
---
drivers/iommu/mtk_iommu.c | 21 ++++++++++++++-------
drivers/iommu/mtk_iommu.h | 5 ++++-
2 files changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 533b8f76f592..0d96dcd8612b 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -91,6 +91,8 @@
#define REG_MMU1_INVLD_PA 0x148
#define REG_MMU0_INT_ID 0x150
#define REG_MMU1_INT_ID 0x154
+#define F_MMU_INT_ID_COMM_ID(a) (((a) >> 9) & 0x7)
+#define F_MMU_INT_ID_SUB_COMM_ID(a) (((a) >> 7) & 0x3)
#define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7)
#define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f)
@@ -109,6 +111,7 @@
#define HAS_VLD_PA_RNG BIT(2)
#define RESET_AXI BIT(3)
#define OUT_ORDER_WR_EN BIT(4)
+#define HAS_SUB_COMM BIT(5)
#define MTK_IOMMU_HAS_FLAG(pdata, _x) \
((((pdata)->flags) & (_x)) == (_x))
@@ -239,7 +242,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
struct mtk_iommu_data *data = dev_id;
struct mtk_iommu_domain *dom = data->m4u_dom;
u32 int_state, regval, fault_iova, fault_pa;
- unsigned int fault_larb, fault_port;
+ unsigned int fault_larb, fault_port, sub_comm = 0;
bool layer, write;
/* Read error info from registers */
@@ -255,10 +258,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
}
layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
- fault_larb = F_MMU_INT_ID_LARB_ID(regval);
fault_port = F_MMU_INT_ID_PORT_ID(regval);
-
- fault_larb = data->plat_data->larbid_remap[fault_larb];
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) {
+ fault_larb = F_MMU_INT_ID_COMM_ID(regval);
+ sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
+ } else {
+ fault_larb = F_MMU_INT_ID_LARB_ID(regval);
+ }
+ fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm];
if (report_iommu_fault(&dom->domain, data->dev, fault_iova,
write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
@@ -785,21 +792,21 @@ static const struct mtk_iommu_plat_data mt2712_data = {
.m4u_plat = M4U_MT2712,
.flags = HAS_4GB_MODE | HAS_BCLK | HAS_VLD_PA_RNG,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
- .larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
+ .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
};
static const struct mtk_iommu_plat_data mt8173_data = {
.m4u_plat = M4U_MT8173,
.flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
- .larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
+ .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
};
static const struct mtk_iommu_plat_data mt8183_data = {
.m4u_plat = M4U_MT8183,
.flags = RESET_AXI,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
- .larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
+ .larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
};
static const struct of_device_id mtk_iommu_of_ids[] = {
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index cf53f5e80d22..46d0d47b22e1 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -17,6 +17,9 @@
#include <linux/spinlock.h>
#include <soc/mediatek/smi.h>
+#define MTK_LARB_COM_MAX 8
+#define MTK_LARB_SUBCOM_MAX 4
+
struct mtk_iommu_suspend_reg {
union {
u32 standard_axi_mode;/* v1 */
@@ -41,7 +44,7 @@ struct mtk_iommu_plat_data {
enum mtk_iommu_plat m4u_plat;
u32 flags;
u32 inv_sel_reg;
- unsigned char larbid_remap[MTK_LARB_NR_MAX];
+ unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
};
struct mtk_iommu_domain;
--
2.18.0
Powered by blists - more mailing lists