| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200703062622.11773-2-cw00.choi@samsung.com>
Date: Fri, 3 Jul 2020 15:26:21 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: lukasz.luba@....com, k.konieczny@...sung.com, krzk@...nel.org,
kgene@...nel.org
Cc: s.nawrocki@...sung.com, willy.mh.wolff.ml@...il.com,
b.zolnierkie@...sung.com, cw00.choi@...sung.com,
chanwoo@...nel.org, myungjoo.ham@...sung.com,
kyungmin.park@...sung.com, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [RFC PATCH 1/2] PM / devfreq: Add support delayed timer for polling
mode
Until now, the devfreq driver using polling mode like simple_ondemand
governor have used only deferrable timer for reduing the redundant
power consumption. It reduces the CPU wake-up from idle due to polling mode
which check the status of Non-CPU device.
But, it has a problem for Non-CPU device like DMC device with DMA operation.
Some Non-CPU device need to do monitor continously regardless of CPU state
in order to decide the proper next status of Non-CPU device.
So, add support the dealyed timer for polling mode to support
the periodical monitoring. The devfreq driver and user can select
the kind of timer on either deferrable and delayed timer.
For example, change the timer type of DMC device
based on Exynos5422-based Odroid-XU3 as following:
- If want to use deferrable timer as following:
echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer
- If want to use delayed timer as following:
echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer
Suggested-by: Lukasz Luba <lukasz.luba@....com>
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
---
Documentation/ABI/testing/sysfs-class-devfreq | 12 +++
drivers/devfreq/devfreq.c | 83 ++++++++++++++++++-
include/linux/devfreq.h | 9 ++
3 files changed, 103 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq
index 9758eb85ade3..b10aa3aa230d 100644
--- a/Documentation/ABI/testing/sysfs-class-devfreq
+++ b/Documentation/ABI/testing/sysfs-class-devfreq
@@ -65,6 +65,18 @@ Description:
as following:
echo 0 > /sys/class/devfreq/.../trans_stat
+What: /sys/class/devfreq/.../timer
+Date: July 2020
+Contact: Chanwoo Choi <cw00.choi@...sung.com>
+Description:
+ This ABI shows and stores the kind of work timer by users.
+ This work timer is used by devfreq workqueue in order to
+ monitor the device status such as utilization. The user
+ can change the work timer on runtime according to their demand
+ as following:
+ echo deferrable > /sys/class/devfreq/.../timer
+ echo delayed > /sys/class/devfreq/.../timer
+
What: /sys/class/devfreq/.../userspace/set_freq
Date: September 2011
Contact: MyungJoo Ham <myungjoo.ham@...sung.com>
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 52b9c3e141f3..2a4aa8742520 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -49,6 +49,11 @@ static LIST_HEAD(devfreq_governor_list);
static LIST_HEAD(devfreq_list);
static DEFINE_MUTEX(devfreq_list_lock);
+static const char timer_name[][DEVFREQ_NAME_LEN] = {
+ [DEVFREQ_TIMER_DEFERRABLE] = { "deferrable" },
+ [DEVFREQ_TIMER_DELAYED] = { "delayed" },
+};
+
/**
* find_device_devfreq() - find devfreq struct using device pointer
* @dev: device pointer used to lookup device devfreq.
@@ -454,7 +459,17 @@ void devfreq_monitor_start(struct devfreq *devfreq)
if (devfreq->governor->interrupt_driven)
return;
- INIT_DEFERRABLE_WORK(&devfreq->work, devfreq_monitor);
+ switch (devfreq->profile->timer) {
+ case DEVFREQ_TIMER_DEFERRABLE:
+ INIT_DEFERRABLE_WORK(&devfreq->work, devfreq_monitor);
+ break;
+ case DEVFREQ_TIMER_DELAYED:
+ INIT_DELAYED_WORK(&devfreq->work, devfreq_monitor);
+ break;
+ default:
+ return;
+ }
+
if (devfreq->profile->polling_ms)
queue_delayed_work(devfreq_wq, &devfreq->work,
msecs_to_jiffies(devfreq->profile->polling_ms));
@@ -771,6 +786,11 @@ struct devfreq *devfreq_add_device(struct device *dev,
devfreq->data = data;
devfreq->nb.notifier_call = devfreq_notifier_call;
+ if (devfreq->profile->timer < 0
+ || devfreq->profile->timer >= DEVFREQ_TIMER_NUM) {
+ goto err_out;
+ }
+
if (!devfreq->profile->max_state && !devfreq->profile->freq_table) {
mutex_unlock(&devfreq->lock);
err = set_freq_table(devfreq);
@@ -1625,6 +1645,66 @@ static ssize_t trans_stat_store(struct device *dev,
}
static DEVICE_ATTR_RW(trans_stat);
+static ssize_t timer_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct devfreq *df = to_devfreq(dev);
+
+ if (!df->governor)
+ return -EINVAL;
+
+ return sprintf(buf, "%s\n", timer_name[df->profile->timer]);
+}
+
+static ssize_t timer_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct devfreq *df = to_devfreq(dev);
+ char str_timer[DEVFREQ_NAME_LEN + 1];
+ int timer = -1;
+ int ret = 0, i;
+
+ ret = sscanf(buf, "%16s", str_timer);
+ if (ret != 1)
+ return -EINVAL;
+
+ for (i = 0; i < DEVFREQ_TIMER_NUM; i++) {
+ if (!strncmp(timer_name[i], str_timer, DEVFREQ_NAME_LEN)) {
+ timer = i;
+ break;
+ }
+ }
+
+ if (timer < 0) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (df->profile->timer == timer) {
+ ret = 0;
+ goto out;
+ }
+
+ mutex_lock(&df->lock);
+ df->profile->timer = timer;
+ mutex_unlock(&df->lock);
+
+ ret = df->governor->event_handler(df, DEVFREQ_GOV_STOP, NULL);
+ if (ret) {
+ dev_warn(dev, "%s: Governor %s not stopped(%d)\n",
+ __func__, df->governor->name, ret);
+ goto out;
+ }
+
+ ret = df->governor->event_handler(df, DEVFREQ_GOV_START, NULL);
+ if (ret)
+ dev_warn(dev, "%s: Governor %s not started(%d)\n",
+ __func__, df->governor->name, ret);
+out:
+ return ret ? ret : count;
+}
+static DEVICE_ATTR_RW(timer);
+
static struct attribute *devfreq_attrs[] = {
&dev_attr_name.attr,
&dev_attr_governor.attr,
@@ -1636,6 +1716,7 @@ static struct attribute *devfreq_attrs[] = {
&dev_attr_min_freq.attr,
&dev_attr_max_freq.attr,
&dev_attr_trans_stat.attr,
+ &dev_attr_timer.attr,
NULL,
};
ATTRIBUTE_GROUPS(devfreq);
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 57e871a559a9..12782fbb4c25 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -31,6 +31,13 @@
#define DEVFREQ_PRECHANGE (0)
#define DEVFREQ_POSTCHANGE (1)
+/* DEVFREQ work timers */
+enum devfreq_timer {
+ DEVFREQ_TIMER_DEFERRABLE = 0,
+ DEVFREQ_TIMER_DELAYED,
+ DEVFREQ_TIMER_NUM,
+};
+
struct devfreq;
struct devfreq_governor;
@@ -70,6 +77,7 @@ struct devfreq_dev_status {
* @initial_freq: The operating frequency when devfreq_add_device() is
* called.
* @polling_ms: The polling interval in ms. 0 disables polling.
+ * @timer: Timer type is either deferrable or delayed timer.
* @target: The device should set its operating frequency at
* freq or lowest-upper-than-freq value. If freq is
* higher than any operable frequency, set maximum.
@@ -96,6 +104,7 @@ struct devfreq_dev_status {
struct devfreq_dev_profile {
unsigned long initial_freq;
unsigned int polling_ms;
+ enum devfreq_timer timer;
int (*target)(struct device *dev, unsigned long *freq, u32 flags);
int (*get_dev_status)(struct device *dev,
--
2.17.1
Powered by blists - more mailing lists