| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200703015102.27295-5-wcheng@codeaurora.org>
Date: Thu, 2 Jul 2020 18:51:00 -0700
From: Wesley Cheng <wcheng@...eaurora.org>
To: lgirdwood@...il.com, mark.rutland@....com, agross@...nel.org,
broonie@...nel.org, heikki.krogerus@...ux.intel.com,
robh+dt@...nel.org, gregkh@...uxfoundation.org,
bjorn.andersson@...aro.org
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
jackp@...eaurora.org, rdunlap@...radead.org,
bryan.odonoghue@...aro.org, Wesley Cheng <wcheng@...eaurora.org>
Subject: [PATCH v5 4/6] regulator: Add support for QCOM PMIC VBUS booster
Some Qualcomm PMICs have the capability to source the VBUS output to
connected peripherals. This driver will register a regulator to the
regulator list to enable or disable this source by an external driver.
Signed-off-by: Wesley Cheng <wcheng@...eaurora.org>
---
drivers/regulator/Kconfig | 10 +++
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_usb_vbus-regulator.c | 97 +++++++++++++++++++++
3 files changed, 108 insertions(+)
create mode 100644 drivers/regulator/qcom_usb_vbus-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 074a2ef55943..273d85a45263 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -797,6 +797,16 @@ config REGULATOR_QCOM_SPMI
Qualcomm SPMI PMICs as a module. The module will be named
"qcom_spmi-regulator".
+config REGULATOR_QCOM_USB_VBUS
+ tristate "Qualcomm USB Vbus regulator driver"
+ depends on SPMI || COMPILE_TEST
+ help
+ If you say yes to this option, support will be included for the
+ regulator used to enable the VBUS output.
+
+ Say M here if you want to include support for enabling the VBUS output
+ as a module. The module will be named "qcom_usb_vbus_regulator".
+
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index c0d6b96ebd78..cbab28aa7b56 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -89,6 +89,7 @@ obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
diff --git a/drivers/regulator/qcom_usb_vbus-regulator.c b/drivers/regulator/qcom_usb_vbus-regulator.c
new file mode 100644
index 000000000000..342d92373598
--- /dev/null
+++ b/drivers/regulator/qcom_usb_vbus-regulator.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Qualcomm PMIC VBUS output regulator driver
+//
+// Copyright (c) 2020, The Linux Foundation. All rights reserved.
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+
+#define CMD_OTG 0x40
+#define OTG_EN BIT(0)
+#define OTG_CFG 0x53
+#define OTG_EN_SRC_CFG BIT(1)
+
+static const struct regulator_ops qcom_usb_vbus_reg_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static struct regulator_desc qcom_usb_vbus_rdesc = {
+ .name = "usb_vbus",
+ .ops = &qcom_usb_vbus_reg_ops,
+ .owner = THIS_MODULE,
+ .type = REGULATOR_VOLTAGE,
+};
+
+static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regulator_dev *rdev;
+ struct regmap *regmap;
+ struct regulator_config config = { };
+ struct regulator_init_data *init_data;
+ int ret;
+ u32 base;
+
+ ret = of_property_read_u32(dev->of_node, "reg", &base);
+ if (ret < 0) {
+ dev_err(dev, "no base address found\n");
+ return ret;
+ }
+
+ regmap = dev_get_regmap(dev->parent, NULL);
+ if (regmap) {
+ dev_err(dev, "Failed to get regmap\n");
+ return -ENOENT;
+ }
+
+ init_data = of_get_regulator_init_data(dev, dev->of_node,
+ &qcom_usb_vbus_rdesc);
+ if (!init_data)
+ return -ENOMEM;
+
+ qcom_usb_vbus_rdesc.enable_reg = base + CMD_OTG;
+ qcom_usb_vbus_rdesc.enable_mask = OTG_EN;
+ config.dev = dev;
+ config.init_data = init_data;
+ config.regmap = regmap;
+
+ rdev = devm_regulator_register(dev, &qcom_usb_vbus_rdesc, &config);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(dev, "not able to register vbus reg %d\n", ret);
+ return ret;
+ }
+
+ /* Disable HW logic for VBUS enable */
+ regmap_update_bits(regmap, base + OTG_CFG, OTG_EN_SRC_CFG, 0);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_usb_vbus_regulator_match[] = {
+ { .compatible = "qcom,pm8150b-vbus-reg" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_usb_vbus_regulator_match);
+
+static struct platform_driver qcom_usb_vbus_regulator_driver = {
+ .driver = {
+ .name = "qcom-usb-vbus-regulator",
+ .of_match_table = qcom_usb_vbus_regulator_match,
+ },
+ .probe = qcom_usb_vbus_regulator_probe,
+};
+module_platform_driver(qcom_usb_vbus_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm USB vbus regulator driver");
+MODULE_LICENSE("GPL v2");
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists