| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200704092511.20856-1-simhavcs@gmail.com>
Date: Sat, 4 Jul 2020 14:54:39 +0530
From: Vinay Simha BN <simhavcs@...il.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Vinay Simha BN <simhavcs@...il.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
dri-devel@...ts.freedesktop.org (open list:DRM DRIVERS),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v7 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings
- converted from .txt to .yaml
- dual-link lvds port added and implemented
- dsi data-lanes property removed, it will be picked
from dsi0 ports
- VESA/JEIDA formats picked from panel-lvds dts
- proper indentation
- single-link and dual-link lvds description and
examples are added
- license modified to (GPL-2.0-only OR BSD-2-Clause)
Signed-off-by: Vinay Simha BN <simhavcs@...il.com>
---
v1:
Initial version wast .txt file
v2:
From txt to yaml file format
v3:
* Andrzej Hajda review comments incorporated
dual port lvds implemented
* Laurent Pinchart review comments incorporated
dsi lanes property removed and it is dynamically
picked from the dsi ports
VESA/JEIDA format picked from panel-lvds dts
v4:
* Sam Ravnborg review comments incorporated
}' is indented properly in examples data-lanes
description for single-link and dual-link lvds
v5:
* Sam Ravnborg review comments incorporated
license modified to (GPL-2.0-only OR BSD-2-Clause)
changelog added
---
.../display/bridge/toshiba,tc358775.yaml | 215 ++++++++++++++++++
1 file changed, 215 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
new file mode 100644
index 000000000000..31f085d8ab13
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358775 DSI to LVDS bridge bindings
+
+maintainers:
+ - Vinay Simha BN <simhavcs@...il.com>
+
+description: |
+ This binding supports DSI to LVDS bridge TC358775
+
+ MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
+ Video frame size:
+ Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
+ limited by 135 MHz LVDS speed
+ Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
+ panel, limited by 270 MHz LVDS speed.
+
+properties:
+ compatible:
+ const: toshiba,tc358775
+
+ reg:
+ maxItems: 1
+ description: i2c address of the bridge, 0x0f
+
+ vdd-supply:
+ maxItems: 1
+ description: 1.2V LVDS Power Supply
+
+ vddio-supply:
+ maxItems: 1
+ description: 1.8V IO Power Supply
+
+ stby-gpios:
+ maxItems: 1
+ description: Standby pin, Low active
+
+ reset-gpios:
+ maxItems: 1
+ description: Hardware reset, Low active
+
+ ports:
+ type: object
+ description:
+ A node containing input and output port nodes with endpoint definitions
+ as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ port@0:
+ type: object
+ description: |
+ DSI Input. The remote endpoint phandle should be a
+ reference to a valid mipi_dsi_host device node.
+
+ port@1:
+ type: object
+ description: |
+ Video port for LVDS output (panel or connector).
+
+ port@2:
+ type: object
+ description: |
+ Video port for Dual link LVDS output (panel or connector).
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vddio-supply
+ - stby-gpios
+ - reset-gpios
+ - ports
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ /* For single-link LVDS display panel */
+
+ i2c@...8000 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ reg = <0x078b8000 0x500>;
+ clock-frequency = <400000>; /* fastmode operation */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tc_bridge: bridge@f {
+ compatible = "toshiba,tc358775";
+ reg = <0x0f>;
+
+ vdd-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+
+ stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ d2l_in_test: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi@...8000 {
+ reg = <0x1a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ remote-endpoint = <&d2l_in_test>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+
+ - |
+ /* For dual-link LVDS display panel */
+
+ i2c@...8000 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ reg = <0x078b8000 0x500>;
+ clock-frequency = <400000>; /* fastmode operation */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tc_bridge_dual: bridge@f {
+ compatible = "toshiba,tc358775";
+ reg = <0x0f>;
+
+ vdd-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+
+ stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ d2l_in_dual: endpoint {
+ remote-endpoint = <&dsi0_out_dual>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in1>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi@...8000 {
+ reg = <0x1a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ dsi0_out_dual: endpoint {
+ remote-endpoint = <&d2l_in_dual>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+...
--
2.17.1
Powered by blists - more mailing lists