[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20200704043151.100780-1-john.stultz@linaro.org>
Date: Sat, 4 Jul 2020 04:31:51 +0000
From: John Stultz <john.stultz@...aro.org>
To: lkml <linux-kernel@...r.kernel.org>
Cc: John Stultz <john.stultz@...aro.org>,
Yu Chen <chenyu56@...wei.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Wei Xu <xuwei5@...ilicon.com>,
Binghui Wang <wangbinghui@...ilicon.com>,
YongQin Liu <yongqin.liu@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org
Subject: [PATCH] dts: hi3660: Add support for basic usb gadget on Hikey960
This patch adds basic core dwc3, usb phy and rt1711h nodes for
usb support on Hikey960.
This does not enable the mux/hub functionality on the board, so
the USB-A host ports will not function, but does allow the USB-C
port to function in gadget mode (unfortunately not in host, as
the hub/mux functionality is needed to enable vbus output to
power devices in host mode).
This is based on an old patch originally by Yu Chen.
Cc: Yu Chen <chenyu56@...wei.com>
Cc: Chunfeng Yun <chunfeng.yun@...iatek.com>
Cc: Wei Xu <xuwei5@...ilicon.com>
Cc: Binghui Wang <wangbinghui@...ilicon.com>
Cc: YongQin Liu <yongqin.liu@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Matthias Brugger <matthias.bgg@...il.com>
Cc: Mark Rutland <mark.rutland@....com>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: devicetree@...r.kernel.org
Signed-off-by: John Stultz <john.stultz@...aro.org>
---
.../boot/dts/hisilicon/hi3660-hikey960.dts | 72 +++++++++++++++++++
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 34 +++++++++
2 files changed, 106 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index e035cf195b19..ff392a47562c 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -13,6 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
/ {
model = "HiKey960";
@@ -526,6 +527,48 @@
&i2c1 {
status = "okay";
+ rt1711h: rt1711h@4e {
+ compatible = "richtek,rt1711h";
+ reg = <0x4e>;
+ status = "ok";
+ interrupt-parent = <&gpio27>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_cfg_func>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 5000, 1000)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&dwc3_ss>;
+ };
+ };
+ };
+ };
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rt1711h_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dwc3_role_switch>;
+ };
+ };
+ };
+
adv7533: adv7533@39 {
status = "ok";
compatible = "adi,adv7533";
@@ -612,3 +655,32 @@
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
};
};
+
+&dwc3 { /* USB */
+ dr_mode = "otg";
+ maximum-speed = "super-speed";
+ phy_type = "utmi";
+ snps,dis-del-phy-power-chg-quirk;
+ snps,lfps_filter_quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,tx_de_emphasis_quirk;
+ snps,tx_de_emphasis = <1>;
+ snps,dis_enblslpm_quirk;
+ snps,gctl-reset-quirk;
+ usb-role-switch;
+ role-switch-default-mode = "host";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dwc3_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&rt1711h_ep>;
+ };
+
+ dwc3_ss: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usb_con_ss>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index c39b78989ff9..d25aac5e0bf8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1152,6 +1152,40 @@
};
};
};
+
+ usb3_otg_bc: usb3_otg_bc@...00000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+
+ usb_phy: usb-phy {
+ compatible = "hisilicon,hi3660-usb-phy";
+ #phy-cells = <0>;
+ hisilicon,pericrg-syscon = <&crg_ctrl>;
+ hisilicon,pctrl-syscon = <&pctrl>;
+ hisilicon,eye-diagram-param = <0x22466e4>;
+ };
+ };
+
+ dwc3: dwc3@...00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff100000 0x0 0x100000>;
+
+ clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+ <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ clock-names = "ref", "bus_early";
+
+ assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ assigned-clock-rates = <229000000>;
+
+ resets = <&crg_rst 0x90 8>,
+ <&crg_rst 0x90 7>,
+ <&crg_rst 0x90 6>,
+ <&crg_rst 0x90 5>;
+
+ interrupts = <0 159 4>, <0 161 4>;
+ phys = <&usb_phy>;
+ phy-names = "usb3-phy";
+ };
};
};
--
2.17.1
Powered by blists - more mailing lists