lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Sun,  5 Jul 2020 14:47:51 +0530
From:   Sivaprakash Murugesan <sivaprak@...eaurora.org>
To:     agross@...nel.org, bjorn.andersson@...aro.org, bhelgaas@...gle.com,
        robh+dt@...nel.org, kishon@...com, vkoul@...nel.org,
        mturquette@...libre.com, sboyd@...nel.org, svarbanov@...sol.com,
        lorenzo.pieralisi@....com, p.zabel@...gutronix.de,
        sivaprak@...eaurora.org, mgautam@...eaurora.org,
        smuthayy@...eaurora.org, varada@...eaurora.org,
        linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-clk@...r.kernel.org
Subject: [PATCH 0/9] Add PCIe support for IPQ8074

IPQ8074 has two PCIe ports both are based on synopsis designware PCIe
controller. while it was assumed that PCIe support for IPQ8074 was already
available. PCIe was not functional until now.

This patch series adds support for PCIe ports on IPQ8074.

First PCIe port is of gen2 synposis version is 2_3_2 which has already been
enabled. But it had some problems on phy init and needed dt updates.

Second PCIe port is gen3 synopsis version is 2_9_0. This series adds
support for this PCIe port while fixing dt nodes.

Patch 1 on this series depends on qcom pcie bindings patch
https://lkml.org/lkml/2020/6/24/162

Sivaprakash Murugesan (9):
  dt-bindings: pci: Add ipq8074 gen3 pci compatible
  dt-bindings: phy: qcom,qmp: Add dt-binding for ipq8074 gen3 pcie phy
  clk: qcom: ipq8074: Add missing bindings for pcie
  clk: qcom: ipq8074: Add missing clocks for pcie
  phy: qcom-qmp: use correct values for ipq8074 gen2 pcie phy init
  phy: qcom-qmp: Add compatible for ipq8074 pcie gen3 qmp phy
  pci: dwc: qcom: do phy power on before pcie init
  pci: qcom: Add support for ipq8074 pci controller
  arm64: dts: ipq8074: Fixup pcie dts nodes

 .../devicetree/bindings/pci/qcom,pcie.yaml         |  47 ++++++
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml      |   1 +
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts          |   8 +-
 arch/arm64/boot/dts/qcom/ipq8074.dtsi              | 109 ++++++++----
 drivers/clk/qcom/gcc-ipq8074.c                     |  60 +++++++
 drivers/pci/controller/dwc/pcie-qcom.c             | 187 +++++++++++++++++++-
 drivers/phy/qualcomm/phy-qcom-pcie3-qmp.h          | 132 +++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.c                | 188 ++++++++++++++++++++-
 drivers/phy/qualcomm/phy-qcom-qmp.h                |   2 +
 include/dt-bindings/clock/qcom,gcc-ipq8074.h       |   4 +
 10 files changed, 683 insertions(+), 55 deletions(-)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-pcie3-qmp.h

-- 
2.7.4

Powered by blists - more mailing lists