| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200705181311.GA3611@kozik-lap>
Date: Sun, 5 Jul 2020 20:13:11 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Marek Szyprowski <m.szyprowski@...sung.com>
Cc: Thierry Reding <thierry.reding@...il.com>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>, Lee Jones <lee.jones@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Kukjin Kim <kgene@...nel.org>, linux-pwm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Sylwester Nawrocki <snawrocki@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Pankaj Dubey <pankaj.dubey@...sung.com>
Subject: Re: [PATCH v2 5/8] ARM: dts: exynos: Remove DMA controller bus node
name to fix dtschema warnings
On Thu, Jul 02, 2020 at 10:34:14PM +0200, Marek Szyprowski wrote:
> On 02.07.2020 17:51, Krzysztof Kozlowski wrote:
> > There is no need to keep DMA controller nodes under AMBA bus node.
> > Remove the "amba" node to fix dtschema warnings like:
> >
> > amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
> >
> > ---
> >
> > Changes since v1:
> > 1. Remove the bus, as suggested by Marek
> > ---
> > arch/arm/boot/dts/exynos3250.dtsi | 47 +++----
> > arch/arm/boot/dts/exynos4.dtsi | 70 +++++-----
> > .../boot/dts/exynos4210-universal_c210.dts | 2 +-
> > arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++-------
> > arch/arm/boot/dts/exynos5410.dtsi | 46 +++----
> > arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++----------
> > 6 files changed, 174 insertions(+), 213 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
> > index 044e5da64a76..d3fb45a56527 100644
> > --- a/arch/arm/boot/dts/exynos3250.dtsi
> > +++ b/arch/arm/boot/dts/exynos3250.dtsi
> > @@ -418,33 +418,26 @@
> > status = "disabled";
> > };
> >
> > - amba {
> > - compatible = "simple-bus";
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - ranges;
> > -
> > - pdma0: pdma@...80000 {
> > - compatible = "arm,pl330", "arm,primecell";
> > - reg = <0x12680000 0x1000>;
> > - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cmu CLK_PDMA0>;
> > - clock-names = "apb_pclk";
> > - #dma-cells = <1>;
> > - #dma-channels = <8>;
> > - #dma-requests = <32>;
> > - };
> > -
> > - pdma1: pdma@...90000 {
> > - compatible = "arm,pl330", "arm,primecell";
> > - reg = <0x12690000 0x1000>;
> > - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cmu CLK_PDMA1>;
> > - clock-names = "apb_pclk";
> > - #dma-cells = <1>;
> > - #dma-channels = <8>;
> > - #dma-requests = <32>;
> > - };
> > + pdma0: pdma@...80000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0x12680000 0x1000>;
> > + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cmu CLK_PDMA0>;
> > + clock-names = "apb_pclk";
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <32>;
> > + };
> > +
> > + pdma1: pdma@...90000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0x12690000 0x1000>;
> > + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cmu CLK_PDMA1>;
> > + clock-names = "apb_pclk";
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <32>;
> > };
> >
> > adc: adc@...c0000 {
> > diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> > index d2779a790ce3..a1e54449f33f 100644
> > --- a/arch/arm/boot/dts/exynos4.dtsi
> > +++ b/arch/arm/boot/dts/exynos4.dtsi
> > @@ -669,45 +669,37 @@
> > status = "disabled";
> > };
> >
> > - amba: amba {
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - compatible = "simple-bus";
> > - interrupt-parent = <&gic>;
> > - ranges;
> > -
> > - pdma0: pdma@...80000 {
> > - compatible = "arm,pl330", "arm,primecell";
> > - reg = <0x12680000 0x1000>;
> > - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clock CLK_PDMA0>;
> > - clock-names = "apb_pclk";
> > - #dma-cells = <1>;
> > - #dma-channels = <8>;
> > - #dma-requests = <32>;
> > - };
> > -
> > - pdma1: pdma@...90000 {
> > - compatible = "arm,pl330", "arm,primecell";
> > - reg = <0x12690000 0x1000>;
> > - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clock CLK_PDMA1>;
> > - clock-names = "apb_pclk";
> > - #dma-cells = <1>;
> > - #dma-channels = <8>;
> > - #dma-requests = <32>;
> > - };
> > -
> > - mdma1: mdma@...50000 {
> > - compatible = "arm,pl330", "arm,primecell";
> > - reg = <0x12850000 0x1000>;
> > - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clock CLK_MDMA>;
> > - clock-names = "apb_pclk";
> > - #dma-cells = <1>;
> > - #dma-channels = <8>;
> > - #dma-requests = <1>;
> > - };
> > + pdma0: pdma@...80000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0x12680000 0x1000>;
> > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clock CLK_PDMA0>;
> > + clock-names = "apb_pclk";
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <32>;
> > + };
> > +
> > + pdma1: pdma@...90000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0x12690000 0x1000>;
> > + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clock CLK_PDMA1>;
> > + clock-names = "apb_pclk";
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <32>;
> > + };
> > +
> > + mdma1: mdma@...50000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0x12850000 0x1000>;
> > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clock CLK_MDMA>;
> > + clock-names = "apb_pclk";
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <1>;
> > };
> >
> > fimd: fimd@...00000 {
> > diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> > index 02fde1a75ebd..e07aa3aa93bd 100644
> > --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
> > +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> > @@ -181,7 +181,7 @@
> > };
> > };
> >
> > -&amba {
> > +&soc {
>
>
> What about the alphabetical order of the labels here?
Yes, I'll keep them ordered. Thanks.
Best regards,
Krzysztof
Powered by blists - more mailing lists