| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <HK2PR01MB328121F60A378124D2C83698FA690@HK2PR01MB3281.apcprd01.prod.exchangelabs.com>
Date: Mon, 6 Jul 2020 05:18:39 +0000
From: Johnson CH Chen (陳昭勳)
<JohnsonCH.Chen@...a.com>
To: Guenter Roeck <linux@...ck-us.net>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-rtc@...r.kernel.org" <linux-rtc@...r.kernel.org>,
"linux-watchdog@...r.kernel.org" <linux-watchdog@...r.kernel.org>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>
Subject: RE: [PATCH v2] rtc: rtc-ds1374: wdt: Use watchdog core for watchdog
part
Hi,
Thanks for your good suggestions!
> > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index
> > b54d87d45c89..5e2444af5657 100644
> > --- a/drivers/rtc/Kconfig
> > +++ b/drivers/rtc/Kconfig
> > @@ -282,6 +282,7 @@ config RTC_DRV_DS1374 config
> RTC_DRV_DS1374_WDT
> > bool "Dallas/Maxim DS1374 watchdog timer"
> > depends on RTC_DRV_DS1374
> > + select WATCHDOG_CORE
>
> This has to be
>
> select WATCHDOG_CORE if WATCHDOG
>
> to fix the problem reported by 0-day.
>
> > help
> > If you say Y here you will get support for the
> > watchdog timer in the Dallas Semiconductor DS1374 diff --git
> > a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index
> > 9c51a12cf70f..57a4e503b34a 100644
> > --- a/drivers/rtc/rtc-ds1374.c
> > +++ b/drivers/rtc/rtc-ds1374.c
> > @@ -46,6 +46,7 @@
> > #define DS1374_REG_WDALM2 0x06
> > #define DS1374_REG_CR 0x07 /* Control */
> > #define DS1374_REG_CR_AIE 0x01 /* Alarm Int. Enable */
> > +#define DS1374_REG_CR_WDSTR 0x08 /* 1=INT, 0=RST */
> > #define DS1374_REG_CR_WDALM 0x20 /* 1=Watchdog, 0=Alarm */
> > #define DS1374_REG_CR_WACE 0x40 /* WD/Alarm counter enable */
> > #define DS1374_REG_SR 0x08 /* Status */
> > @@ -71,7 +72,9 @@ struct ds1374 {
> > struct i2c_client *client;
> > struct rtc_device *rtc;
> > struct work_struct work;
> > -
> > +#ifdef CONFIG_RTC_DRV_DS1374_WDT
> > + struct watchdog_device wdt;
> > +#endif
> > /* The mutex protects alarm operations, and prevents a race
> > * between the enable_irq() in the workqueue and the free_irq()
> > * in the remove function.
> > @@ -371,72 +374,76 @@ static const struct rtc_class_ops ds1374_rtc_ops =
> {
> > */
> > static struct i2c_client *save_client;
>
> This is no longer necessary. struct watchdog_device is part of struct ds1374, so
> it is possible to derive the pointer to struct ds1374 from it and get the client
> pointer from there.
>
> > /* Default margin */
> > -#define WD_TIMO 131762
> > +#define TIMER_MARGIN_DEFAULT 32
> > +#define TIMER_MARGIN_MIN 1
> > +#define TIMER_MARGIN_MAX 4095 /* 24-bit value */
> >
> > #define DRV_NAME "DS1374 Watchdog"
> >
> > -static int wdt_margin = WD_TIMO;
> > -static unsigned long wdt_is_open;
> > +static int wdt_margin = TIMER_MARGIN_DEFAULT;
>
> Should be 0, not TIMER_MARGIN_DEFAULT.
>
> > module_param(wdt_margin, int, 0);
> > MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds
> (default
> > 32s)");
> >
> > +static bool nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout,
> > +bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped
> once
> > +started (default ="
> > + __MODULE_STRING(WATCHDOG_NOWAYOUT)")");
> > +
> > +
> > static const struct watchdog_info ds1374_wdt_info = {
> > .identity = "DS1374 WTD",
> > .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> > WDIOF_MAGICCLOSE,
> > };
> >
> > -static int ds1374_wdt_settimeout(unsigned int timeout)
> > +static int ds1374_wdt_settimeout(struct watchdog_device *wdt,
> > +unsigned int timeout)
> > {
> > - int ret = -ENOIOCTLCMD;
> > - int cr;
> > + int ret, cr;
> >
> > - ret = cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR);
> > - if (ret < 0)
> > - goto out;
> > + wdt->timeout = timeout;
> > +
> > + cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR);
> > + if (cr < 0)
> > + return cr;
> >
> > /* Disable any existing watchdog/alarm before setting the new one */
> > cr &= ~DS1374_REG_CR_WACE;
> >
> > ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
> > if (ret < 0)
> > - goto out;
> > + return ret;
> >
> > /* Set new watchdog time */
> > + timeout = timeout * 4096;
> > ret = ds1374_write_rtc(save_client, timeout, DS1374_REG_WDALM0, 3);
> > if (ret) {
> > pr_info("couldn't set new watchdog time\n");
>
> dev_info() can now be used since we have a device. _info seems to be wrong,
> though, since this is an error.
>
> > - goto out;
> > + return ret;
> > }
> >
> > /* Enable watchdog timer */
> > cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_WDALM;
> > + cr &= ~DS1374_REG_CR_WDSTR;/* for RST PIN */
> > cr &= ~DS1374_REG_CR_AIE;
> >
> > ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
> > if (ret < 0)
> > - goto out;
> > + return ret;
> >
> > return 0;
> > -out:
> > - return ret;
> > }
> >
> > -
> > /*
> > * Reload the watchdog timer. (ie, pat the watchdog)
> > */
> > -static void ds1374_wdt_ping(void)
> > +static int ds1374_wdt_start(struct watchdog_device *wdt)
> > {
> > u32 val;
> > - int ret = 0;
> >
> > - ret = ds1374_read_rtc(save_client, &val, DS1374_REG_WDALM0, 3);
> > - if (ret)
> > - pr_info("WD TICK FAIL!!!!!!!!!! %i\n", ret);
> > + return ds1374_read_rtc(save_client, &val, DS1374_REG_WDALM0, 3);
> > }
> >
> > -static void ds1374_wdt_disable(void)
> > +static int ds1374_wdt_stop(struct watchdog_device *wdt)
> > {
> > int cr;
> >
> > @@ -444,162 +451,16 @@ static void ds1374_wdt_disable(void)
> > /* Disable watchdog timer */
> > cr &= ~DS1374_REG_CR_WACE;
> >
> > - i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
> > -}
> > -
> > -/*
> > - * Watchdog device is opened, and watchdog starts running.
> > - */
> > -static int ds1374_wdt_open(struct inode *inode, struct file *file) -{
> > - struct ds1374 *ds1374 = i2c_get_clientdata(save_client);
> > -
> > - if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
> > - mutex_lock(&ds1374->mutex);
> > - if (test_and_set_bit(0, &wdt_is_open)) {
> > - mutex_unlock(&ds1374->mutex);
> > - return -EBUSY;
> > - }
> > - /*
> > - * Activate
> > - */
> > - wdt_is_open = 1;
> > - mutex_unlock(&ds1374->mutex);
> > - return stream_open(inode, file);
> > - }
> > - return -ENODEV;
> > -}
> > -
> > -/*
> > - * Close the watchdog device.
> > - */
> > -static int ds1374_wdt_release(struct inode *inode, struct file *file)
> > -{
> > - if (MINOR(inode->i_rdev) == WATCHDOG_MINOR)
> > - clear_bit(0, &wdt_is_open);
> > -
> > - return 0;
> > + return i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
> > }
> >
> > -/*
> > - * Pat the watchdog whenever device is written to.
> > - */
> > -static ssize_t ds1374_wdt_write(struct file *file, const char __user *data,
> > - size_t len, loff_t *ppos)
> > -{
> > - if (len) {
> > - ds1374_wdt_ping();
> > - return 1;
> > - }
> > - return 0;
> > -}
> > -
> > -static ssize_t ds1374_wdt_read(struct file *file, char __user *data,
> > - size_t len, loff_t *ppos)
> > -{
> > - return 0;
> > -}
> > -
> > -/*
> > - * Handle commands from user-space.
> > - */
> > -static long ds1374_wdt_ioctl(struct file *file, unsigned int cmd,
> > - unsigned long arg)
> > -{
> > - int new_margin, options;
> > -
> > - switch (cmd) {
> > - case WDIOC_GETSUPPORT:
> > - return copy_to_user((struct watchdog_info __user *)arg,
> > - &ds1374_wdt_info, sizeof(ds1374_wdt_info)) ? -EFAULT : 0;
> > -
> > - case WDIOC_GETSTATUS:
> > - case WDIOC_GETBOOTSTATUS:
> > - return put_user(0, (int __user *)arg);
> > - case WDIOC_KEEPALIVE:
> > - ds1374_wdt_ping();
> > - return 0;
> > - case WDIOC_SETTIMEOUT:
> > - if (get_user(new_margin, (int __user *)arg))
> > - return -EFAULT;
> > -
> > - /* the hardware's tick rate is 4096 Hz, so
> > - * the counter value needs to be scaled accordingly
> > - */
> > - new_margin <<= 12;
> > - if (new_margin < 1 || new_margin > 16777216)
> > - return -EINVAL;
> > -
> > - wdt_margin = new_margin;
> > - ds1374_wdt_settimeout(new_margin);
> > - ds1374_wdt_ping();
> > - /* fallthrough */
> > - case WDIOC_GETTIMEOUT:
> > - /* when returning ... inverse is true */
> > - return put_user((wdt_margin >> 12), (int __user *)arg);
> > - case WDIOC_SETOPTIONS:
> > - if (copy_from_user(&options, (int __user *)arg, sizeof(int)))
> > - return -EFAULT;
> > -
> > - if (options & WDIOS_DISABLECARD) {
> > - pr_info("disable watchdog\n");
> > - ds1374_wdt_disable();
> > - return 0;
> > - }
> > -
> > - if (options & WDIOS_ENABLECARD) {
> > - pr_info("enable watchdog\n");
> > - ds1374_wdt_settimeout(wdt_margin);
> > - ds1374_wdt_ping();
> > - return 0;
> > - }
> > - return -EINVAL;
> > - }
> > - return -ENOTTY;
> > -}
> > -
> > -static long ds1374_wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
> > - unsigned long arg)
> > -{
> > - int ret;
> > - struct ds1374 *ds1374 = i2c_get_clientdata(save_client);
> > -
> > - mutex_lock(&ds1374->mutex);
> > - ret = ds1374_wdt_ioctl(file, cmd, arg);
> > - mutex_unlock(&ds1374->mutex);
> > -
> > - return ret;
> > -}
> > -
> > -static int ds1374_wdt_notify_sys(struct notifier_block *this,
> > - unsigned long code, void *unused)
> > -{
> > - if (code == SYS_DOWN || code == SYS_HALT)
> > - /* Disable Watchdog */
> > - ds1374_wdt_disable();
> > - return NOTIFY_DONE;
> > -}
> > -
> > -static const struct file_operations ds1374_wdt_fops = {
> > - .owner = THIS_MODULE,
> > - .read = ds1374_wdt_read,
> > - .unlocked_ioctl = ds1374_wdt_unlocked_ioctl,
> > - .compat_ioctl = compat_ptr_ioctl,
> > - .write = ds1374_wdt_write,
> > - .open = ds1374_wdt_open,
> > - .release = ds1374_wdt_release,
> > - .llseek = no_llseek,
> > +static const struct watchdog_ops ds1374_wdt_ops = {
> > + .owner = THIS_MODULE,
> > + .start = ds1374_wdt_start,
> > + .stop = ds1374_wdt_stop,
> > + .set_timeout = ds1374_wdt_settimeout,
> > };
> >
> > -static struct miscdevice ds1374_miscdev = {
> > - .minor = WATCHDOG_MINOR,
> > - .name = "watchdog",
> > - .fops = &ds1374_wdt_fops,
> > -};
> > -
> > -static struct notifier_block ds1374_wdt_notifier = {
> > - .notifier_call = ds1374_wdt_notify_sys,
> > -};
> >
> > #endif /*CONFIG_RTC_DRV_DS1374_WDT*/
> > /*
> > @@ -653,15 +514,25 @@ static int ds1374_probe(struct i2c_client
> > *client,
> >
> > #ifdef CONFIG_RTC_DRV_DS1374_WDT
> > save_client = client;
> > - ret = misc_register(&ds1374_miscdev);
> > - if (ret)
> > - return ret;
> > - ret = register_reboot_notifier(&ds1374_wdt_notifier);
> > + ds1374->wdt.info = &ds1374_wdt_info;
> > + ds1374->wdt.ops = &ds1374_wdt_ops;
> > + ds1374->wdt.timeout = TIMER_MARGIN_DEFAULT;
> > + ds1374->wdt.min_timeout = TIMER_MARGIN_MIN;
> > + ds1374->wdt.max_timeout = TIMER_MARGIN_MAX;
> > +
> > + watchdog_init_timeout(&ds1374->wdt, wdt_margin, &client->dev);
> > + watchdog_set_nowayout(&ds1374->wdt, nowayout);
> > + watchdog_stop_on_reboot(&ds1374->wdt);
> > + watchdog_stop_on_unregister(&ds1374->wdt);
> > + ds1374_wdt_settimeout(&ds1374->wdt, wdt_margin);
> > +
> > + ret = devm_watchdog_register_device(&client->dev, &ds1374->wdt);
> > if (ret) {
> > - misc_deregister(&ds1374_miscdev);
> > + dev_err(&client->dev, "failed to register DS1374 watchdog
> > +device\n");
> > return ret;
> > }
> > - ds1374_wdt_settimeout(131072);
> > +
> > + dev_info(&client->dev, "DS1374 watchdog device enabled\n");
>
> Is that necessary ?
>
I think it's good to show watchdog initial timeout. I'll include above suggestions in v3, thanks!
Best regards,
Johnson
> > #endif
> >
> > return 0;
> > @@ -670,11 +541,6 @@ static int ds1374_probe(struct i2c_client
> > *client, static int ds1374_remove(struct i2c_client *client) {
> > struct ds1374 *ds1374 = i2c_get_clientdata(client); -#ifdef
> > CONFIG_RTC_DRV_DS1374_WDT
> > - misc_deregister(&ds1374_miscdev);
> > - ds1374_miscdev.parent = NULL;
> > - unregister_reboot_notifier(&ds1374_wdt_notifier);
> > -#endif
> >
> > if (client->irq > 0) {
> > mutex_lock(&ds1374->mutex);
> > --
> > 2.20.1
Powered by blists - more mailing lists