| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 5 Jul 2020 18:02:33 -0700
From: Chris Healy <cphealy@...il.com>
To: Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Stefan Agner <stefan@...er.ch>,
Rob Herring <robh+dt@...nel.org>,
linux ARM <linux-arm-kernel@...ts.infradead.org>,
Fabio Estevam <festevam@...il.com>,
linux-kernel <linux-kernel@...r.kernel.org>,
devicetree@...r.kernel.org, Andrew Lunn <andrew@...n.ch>
Subject: [PATCH] arm: DT: vf610-zii-scu4-aib.dts: Configure fibre ports to 1000BaseX
The SFF soldered onto the board expect the ports to use 1000BaseX. It
makes no sense to have the ports set to SGMII, since they don't even
support that mode.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Chris Healy <cphealy@...il.com>
---
arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index b642520199ba..040a1f8b6130 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -186,7 +186,7 @@
port@2 {
reg = <2>;
label = "eth_fc_1000_2";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff1>;
};
@@ -194,7 +194,7 @@
port@3 {
reg = <3>;
label = "eth_fc_1000_3";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff2>;
};
@@ -202,7 +202,7 @@
port@4 {
reg = <4>;
label = "eth_fc_1000_4";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff3>;
};
@@ -210,7 +210,7 @@
port@5 {
reg = <5>;
label = "eth_fc_1000_5";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff4>;
};
@@ -218,7 +218,7 @@
port@6 {
reg = <6>;
label = "eth_fc_1000_6";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff5>;
};
@@ -226,7 +226,7 @@
port@7 {
reg = <7>;
label = "eth_fc_1000_7";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff6>;
};
@@ -234,7 +234,7 @@
port@9 {
reg = <9>;
label = "eth_fc_1000_1";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff0>;
};
@@ -269,7 +269,7 @@
port@2 {
reg = <2>;
label = "eth_fc_1000_8";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff7>;
};
@@ -277,7 +277,7 @@
port@3 {
reg = <3>;
label = "eth_fc_1000_9";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff8>;
};
@@ -285,7 +285,7 @@
port@4 {
reg = <4>;
label = "eth_fc_1000_10";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff9>;
};
--
2.21.3
Powered by blists - more mailing lists