| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9f05e20f-fec5-de3a-d069-d7835873380a@gmail.com>
Date: Mon, 6 Jul 2020 17:20:04 +0200
From: Matthias Brugger <matthias.bgg@...il.com>
To: Chao Hao <chao.hao@...iatek.com>, Joerg Roedel <joro@...tes.org>,
Rob Herring <robh+dt@...nel.org>
Cc: iommu@...ts.linux-foundation.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, wsd_upstream@...iatek.com,
FY Yang <fy.yang@...iatek.com>, Yong Wu <yong.wu@...iatek.com>,
TH Yang <th.yang@...iatek.com>
Subject: Re: [PATCH v6 06/10] iommu/mediatek: Add sub_comm id in translation
fault
On 03/07/2020 06:41, Chao Hao wrote:
> The max larb number that a iommu HW support is 8(larb0~larb7 in the below
> diagram).
> If the larb's number is over 8, we use a sub_common for merging
> several larbs into one larb. At this case, we will extend larb_id:
> bit[11:9] means common-id;
> bit[8:7] means subcommon-id;
> From these two variables, we could get the real larb number when
> translation fault happen.
> The diagram is as below:
> EMI
> |
> IOMMU
> |
> -----------------
> | |
> common1 common0
> | |
> -----------------
> |
> smi common
> |
> ------------------------------------
> | | | | | |
> 3'd0 3'd1 3'd2 3'd3 ... 3'd7 <-common_id(max is 8)
> | | | | | |
> Larb0 Larb1 | Larb3 ... Larb7
> |
> smi sub common
> |
> --------------------------
> | | | |
> 2'd0 2'd1 2'd2 2'd3 <-sub_common_id(max is 4)
> | | | |
> Larb8 Larb9 Larb10 Larb11
>
> In this patch we extend larb_remap[] to larb_remap[8][4] for this.
> larb_remap[x][y]: x means common-id above, y means subcommon_id above.
>
> We can also distinguish if the M4U HW has sub_common by HAS_SUB_COMM
> macro.
>
> Cc: Matthias Brugger <matthias.bgg@...il.com>
> Signed-off-by: Chao Hao <chao.hao@...iatek.com>
> Reviewed-by: Yong Wu <yong.wu@...iatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@...il.com>
> ---
> drivers/iommu/mtk_iommu.c | 21 ++++++++++++++-------
> drivers/iommu/mtk_iommu.h | 5 ++++-
> 2 files changed, 18 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 533b8f76f592..0d96dcd8612b 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -91,6 +91,8 @@
> #define REG_MMU1_INVLD_PA 0x148
> #define REG_MMU0_INT_ID 0x150
> #define REG_MMU1_INT_ID 0x154
> +#define F_MMU_INT_ID_COMM_ID(a) (((a) >> 9) & 0x7)
> +#define F_MMU_INT_ID_SUB_COMM_ID(a) (((a) >> 7) & 0x3)
> #define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7)
> #define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f)
>
> @@ -109,6 +111,7 @@
> #define HAS_VLD_PA_RNG BIT(2)
> #define RESET_AXI BIT(3)
> #define OUT_ORDER_WR_EN BIT(4)
> +#define HAS_SUB_COMM BIT(5)
>
> #define MTK_IOMMU_HAS_FLAG(pdata, _x) \
> ((((pdata)->flags) & (_x)) == (_x))
> @@ -239,7 +242,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
> struct mtk_iommu_data *data = dev_id;
> struct mtk_iommu_domain *dom = data->m4u_dom;
> u32 int_state, regval, fault_iova, fault_pa;
> - unsigned int fault_larb, fault_port;
> + unsigned int fault_larb, fault_port, sub_comm = 0;
> bool layer, write;
>
> /* Read error info from registers */
> @@ -255,10 +258,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
> }
> layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
> write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
> - fault_larb = F_MMU_INT_ID_LARB_ID(regval);
> fault_port = F_MMU_INT_ID_PORT_ID(regval);
> -
> - fault_larb = data->plat_data->larbid_remap[fault_larb];
> + if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) {
> + fault_larb = F_MMU_INT_ID_COMM_ID(regval);
> + sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
> + } else {
> + fault_larb = F_MMU_INT_ID_LARB_ID(regval);
> + }
> + fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm];
>
> if (report_iommu_fault(&dom->domain, data->dev, fault_iova,
> write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
> @@ -785,21 +792,21 @@ static const struct mtk_iommu_plat_data mt2712_data = {
> .m4u_plat = M4U_MT2712,
> .flags = HAS_4GB_MODE | HAS_BCLK | HAS_VLD_PA_RNG,
> .inv_sel_reg = REG_MMU_INV_SEL_GEN1,
> - .larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
> + .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
> };
>
> static const struct mtk_iommu_plat_data mt8173_data = {
> .m4u_plat = M4U_MT8173,
> .flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI,
> .inv_sel_reg = REG_MMU_INV_SEL_GEN1,
> - .larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
> + .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
> };
>
> static const struct mtk_iommu_plat_data mt8183_data = {
> .m4u_plat = M4U_MT8183,
> .flags = RESET_AXI,
> .inv_sel_reg = REG_MMU_INV_SEL_GEN1,
> - .larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
> + .larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
> };
>
> static const struct of_device_id mtk_iommu_of_ids[] = {
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index cf53f5e80d22..46d0d47b22e1 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -17,6 +17,9 @@
> #include <linux/spinlock.h>
> #include <soc/mediatek/smi.h>
>
> +#define MTK_LARB_COM_MAX 8
> +#define MTK_LARB_SUBCOM_MAX 4
> +
> struct mtk_iommu_suspend_reg {
> union {
> u32 standard_axi_mode;/* v1 */
> @@ -41,7 +44,7 @@ struct mtk_iommu_plat_data {
> enum mtk_iommu_plat m4u_plat;
> u32 flags;
> u32 inv_sel_reg;
> - unsigned char larbid_remap[MTK_LARB_NR_MAX];
> + unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
> };
>
> struct mtk_iommu_domain;
>
Powered by blists - more mailing lists