[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200706153821.786-5-alobakin@marvell.com>
Date: Mon, 6 Jul 2020 18:38:16 +0300
From: Alexander Lobakin <alobakin@...vell.com>
To: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>
CC: Alexander Lobakin <alobakin@...vell.com>,
Igor Russkikh <irusskikh@...vell.com>,
Michal Kalderon <michal.kalderon@...vell.com>,
"Ariel Elior" <aelior@...vell.com>,
Denis Bolotin <denis.bolotin@...vell.com>,
<GR-everest-linux-l2@...vell.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH net-next 4/9] net: qed: address kernel-doc warnings
Get rid of the kernel-doc warnings when building with W=1+ by
rewriting the problematic doc comments according to the
recommended format and style.
Note that this only fixes problems found in C source files,
headers aren't in scope for now.
Signed-off-by: Alexander Lobakin <alobakin@...vell.com>
Signed-off-by: Igor Russkikh <irusskikh@...vell.com>
---
.../ethernet/qlogic/qed/qed_init_fw_funcs.c | 17 ++++---
drivers/net/ethernet/qlogic/qed/qed_int.c | 49 ++++++++++---------
drivers/net/ethernet/qlogic/qed/qed_spq.c | 16 +++---
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 21 ++++----
4 files changed, 55 insertions(+), 48 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c b/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c
index 1eb48ea80484..2ce1f5180231 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c
@@ -996,14 +996,17 @@ bool qed_send_qm_stop_cmd(struct qed_hwfn *p_hwfn,
} while (0)
/**
- * @brief qed_dmae_to_grc - is an internal function - writes from host to
- * wide-bus registers (split registers are not supported yet)
+ * qed_dmae_to_grc() - Internal function for writing from host to
+ * wide-bus registers (split registers are not supported yet).
*
- * @param p_hwfn - HW device data
- * @param p_ptt - ptt window used for writing the registers.
- * @param p_data - pointer to source data.
- * @param addr - Destination register address.
- * @param len_in_dwords - data length in DWARDS (u32)
+ * @p_hwfn: HW device data.
+ * @p_ptt: PTT window used for writing the registers.
+ * @p_data: Pointer to source data.
+ * @addr: Destination register address.
+ * @len_in_dwords: Data length in dwords (u32).
+ *
+ * Return: Length of the written data in dwords (u32) or -1 on invalid
+ * input.
*/
static int qed_dmae_to_grc(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index 297983d66e2f..0da38c47a8cf 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -816,11 +816,12 @@ static inline u16 qed_attn_update_idx(struct qed_hwfn *p_hwfn,
}
/**
- * @brief qed_int_assertion - handles asserted attention bits
+ * qed_int_assertion() - Handle asserted attention bits.
*
- * @param p_hwfn
- * @param asserted_bits newly asserted bits
- * @return int
+ * @p_hwfn: HW device data.
+ * @asserted_bits: Newly asserted bits.
+ *
+ * Return: Zero value.
*/
static int qed_int_assertion(struct qed_hwfn *p_hwfn, u16 asserted_bits)
{
@@ -880,16 +881,17 @@ static void qed_int_attn_print(struct qed_hwfn *p_hwfn,
}
/**
- * @brief qed_int_deassertion_aeu_bit - handles the effects of a single
- * cause of the attention
+ * qed_int_deassertion_aeu_bit() - Handles the effects of a single
+ * cause of the attention.
*
- * @param p_hwfn
- * @param p_aeu - descriptor of an AEU bit which caused the attention
- * @param aeu_en_reg - register offset of the AEU enable reg. which configured
- * this bit to this group.
- * @param bit_index - index of this bit in the aeu_en_reg
+ * @p_hwfn: HW device data.
+ * @p_aeu: Descriptor of an AEU bit which caused the attention.
+ * @aeu_en_reg: Register offset of the AEU enable reg. which configured
+ * this bit to this group.
+ * @p_bit_name: AEU bit description for logging purposes.
+ * @bitmask: Index of this bit in the aeu_en_reg.
*
- * @return int
+ * Return: Zero on success, negative errno otherwise.
*/
static int
qed_int_deassertion_aeu_bit(struct qed_hwfn *p_hwfn,
@@ -938,12 +940,12 @@ qed_int_deassertion_aeu_bit(struct qed_hwfn *p_hwfn,
}
/**
- * @brief qed_int_deassertion_parity - handle a single parity AEU source
+ * qed_int_deassertion_parity() - Handle a single parity AEU source.
*
- * @param p_hwfn
- * @param p_aeu - descriptor of an AEU bit which caused the parity
- * @param aeu_en_reg - address of the AEU enable register
- * @param bit_index
+ * @p_hwfn: HW device data.
+ * @p_aeu: Descriptor of an AEU bit which caused the parity.
+ * @aeu_en_reg: Address of the AEU enable register.
+ * @bit_index: Index (0-31) of an AEU bit.
*/
static void qed_int_deassertion_parity(struct qed_hwfn *p_hwfn,
struct aeu_invert_reg_bit *p_aeu,
@@ -976,12 +978,13 @@ static void qed_int_deassertion_parity(struct qed_hwfn *p_hwfn,
}
/**
- * @brief - handles deassertion of previously asserted attentions.
+ * qed_int_deassertion() - Handle deassertion of previously asserted
+ * attentions.
*
- * @param p_hwfn
- * @param deasserted_bits - newly deasserted bits
- * @return int
+ * @p_hwfn: HW device data.
+ * @deasserted_bits: newly deasserted bits.
*
+ * Return: Zero value.
*/
static int qed_int_deassertion(struct qed_hwfn *p_hwfn,
u16 deasserted_bits)
@@ -2241,9 +2244,9 @@ int qed_int_igu_read_cam(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
}
/**
- * @brief Initialize igu runtime registers
+ * qed_int_igu_init_rt() - Initialize IGU runtime registers.
*
- * @param p_hwfn
+ * @p_hwfn: HW device data.
*/
void qed_int_igu_init_rt(struct qed_hwfn *p_hwfn)
{
diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c
index ee89a8f4f585..92ab029789e5 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_spq.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c
@@ -642,18 +642,18 @@ void qed_spq_return_entry(struct qed_hwfn *p_hwfn, struct qed_spq_entry *p_ent)
}
/**
- * @brief qed_spq_add_entry - adds a new entry to the pending
- * list. Should be used while lock is being held.
+ * qed_spq_add_entry() - Add a new entry to the pending list.
+ * Should be used while lock is being held.
*
- * Addes an entry to the pending list is there is room (en empty
+ * @p_hwfn: HW device data.
+ * @p_ent: An entry to add.
+ * @priority: Desired priority.
+ *
+ * Adds an entry to the pending list is there is room (an empty
* element is available in the free_pool), or else places the
* entry in the unlimited_pending pool.
*
- * @param p_hwfn
- * @param p_ent
- * @param priority
- *
- * @return int
+ * Return: zero on success, -EINVAL on invalid @priority.
*/
static int qed_spq_add_entry(struct qed_hwfn *p_hwfn,
struct qed_spq_entry *p_ent,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index fcf4d82da161..3930958f0ffa 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -823,16 +823,17 @@ static int qed_iov_enable_vf_access(struct qed_hwfn *p_hwfn,
}
/**
- * @brief qed_iov_config_perm_table - configure the permission
- * zone table.
- * In E4, queue zone permission table size is 320x9. There
- * are 320 VF queues for single engine device (256 for dual
- * engine device), and each entry has the following format:
- * {Valid, VF[7:0]}
- * @param p_hwfn
- * @param p_ptt
- * @param vf
- * @param enable
+ * qed_iov_config_perm_table() - Configure the permission zone table.
+ *
+ * @p_hwfn: HW device data.
+ * @p_ptt: PTT window for writing the registers.
+ * @vf: VF info data.
+ * @enable: The actual permision for this VF.
+ *
+ * In E4, queue zone permission table size is 320x9. There
+ * are 320 VF queues for single engine device (256 for dual
+ * engine device), and each entry has the following format:
+ * {Valid, VF[7:0]}
*/
static void qed_iov_config_perm_table(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt,
--
2.25.1
Powered by blists - more mailing lists