[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200708071942.22595-1-frank@allwinnertech.com>
Date: Wed, 8 Jul 2020 15:19:26 +0800
From: Frank Lee <frank@...winnertech.com>
To: robh+dt@...nel.org, mripard@...nel.org, wens@...e.org,
mturquette@...libre.com, sboyd@...nel.org,
gregory.clement@...tlin.com, tglx@...utronix.de,
jason@...edaemon.net, maz@...nel.org,
srinivas.kandagatla@...aro.org, linus.walleij@...aro.org,
anarsoul@...il.com, tiny.windzz@...il.com, rui.zhang@...el.com,
daniel.lezcano@...aro.org, amit.kucheria@...durent.com,
lee.jones@...aro.org, p.zabel@...gutronix.de, clabbe@...libre.com,
icenowy@...c.io, megous@...ous.com, stefan@...mex.com,
bage@...utronix.de
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-i2c@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-pm@...r.kernel.org, huangshuosheng@...winnertech.com,
liyong@...winnertech.com, Frank Lee <frank@...winnertech.com>
Subject: [PATCH v3 00/16] Allwinner A100 Initial support
This patch set adds initial support for allwinner a100 soc,
which is a 64-bit tablet chip.
v3:
-Add pmu and nmi support
-Add read data mask for calibration
-Code style
-Some trivial things in yaml files
v2:
-Some naming consistency
-Repair email address
-Fix mmc clock
-Don't export system clock
-Fix checkpatch warning
-Drop unneeded pin function, convert to jtag_gpu and i2s_x
Frank Lee (16):
dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and
R-CCU
clk: sunxi-ng: add support for the Allwinner A100 CCU
dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings
dt-bindings: pinctrl: sunxi: make gpio banks supplies required
pinctrl: sunxi: add support for the Allwinner A100 pin controller
dt-bindings: nvmem: SID: add binding for A100's SID controller
dt-bindings: thermal: sun8i: Add binding for A100's THS controller
thermal: sun8i: add TEMP_CALIB_MASK for calibration data in
sun50i_h6_ths_calibrate
thermal: sun8i: Add A100's THS controller support
mfd: axp20x: Allow the AXP803 to be probed by I2C
dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi
dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller
dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node.
arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings
arm64: allwinner: A100: add support for Allwinner Perf1 board
Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +
.../bindings/clock/allwinner,sun4i-a10-ccu.yaml | 7 +-
.../bindings/i2c/marvell,mv64xxx-i2c.yaml | 3 +
.../allwinner,sun7i-a20-sc-nmi.yaml | 5 +-
.../bindings/nvmem/allwinner,sun4i-a10-sid.yaml | 3 +
.../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 75 +-
.../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 6 +-
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun50i-a100-allwinner-perf1.dts | 180 +++
arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 364 ++++++
drivers/clk/sunxi-ng/Kconfig | 10 +
drivers/clk/sunxi-ng/Makefile | 2 +
drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c | 214 ++++
drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h | 21 +
drivers/clk/sunxi-ng/ccu-sun50i-a100.c | 1276 ++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-a100.h | 56 +
drivers/mfd/axp20x-i2c.c | 2 +
drivers/pinctrl/sunxi/Kconfig | 10 +
drivers/pinctrl/sunxi/Makefile | 2 +
drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c | 105 ++
drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c | 708 +++++++++++
drivers/thermal/sun8i_thermal.c | 16 +-
include/dt-bindings/clock/sun50i-a100-ccu.h | 116 ++
include/dt-bindings/clock/sun50i-a100-r-ccu.h | 23 +
include/dt-bindings/reset/sun50i-a100-ccu.h | 68 ++
include/dt-bindings/reset/sun50i-a100-r-ccu.h | 18 +
26 files changed, 3262 insertions(+), 34 deletions(-)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.h
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c
create mode 100644 include/dt-bindings/clock/sun50i-a100-ccu.h
create mode 100644 include/dt-bindings/clock/sun50i-a100-r-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-a100-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-a100-r-ccu.h
--
1.9.1
Powered by blists - more mailing lists