| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200708132124.3b3iaavms43o622g@core.my.home>
Date: Wed, 8 Jul 2020 15:21:24 +0200
From: Ondřej Jirman <megous@...ous.com>
To: Frank Lee <tiny.windzz@...il.com>
Cc: linux-sunxi@...glegroups.com,
Vasily Khoruzhick <anarsoul@...il.com>,
Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amit.kucheria@...durent.com>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
"open list:ALLWINNER THERMAL DRIVER" <linux-pm@...r.kernel.org>,
"moderated list:ARM/Allwinner sunXi SoC support"
<linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] thermal: sun8i: Be loud when probe fails
On Wed, Jul 08, 2020 at 07:55:40PM +0800, Frank Lee wrote:
> HI Ondrej,
> On Wed, Jul 8, 2020 at 6:55 PM Ondrej Jirman <megous@...ous.com> wrote:
> >
> > I noticed several mobile Linux distributions failing to enable the
> > thermal regulation correctly, because the kernel is silent
> > when thermal driver fails to probe. Add enough error reporting
> > to debug issues and warn users in case thermal sensor is failing
> > to probe.
> >
> > Failing to notify users means, that SoC can easily overheat under
> > load.
> >
> > Signed-off-by: Ondrej Jirman <megous@...ous.com>
> > ---
> > drivers/thermal/sun8i_thermal.c | 55 ++++++++++++++++++++++++++-------
> > 1 file changed, 43 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
> > index 74d73be16496..9065e79ae743 100644
> > --- a/drivers/thermal/sun8i_thermal.c
> > +++ b/drivers/thermal/sun8i_thermal.c
> > @@ -287,8 +287,12 @@ static int sun8i_ths_calibrate(struct ths_device *tmdev)
> >
> > calcell = devm_nvmem_cell_get(dev, "calibration");
> > if (IS_ERR(calcell)) {
> > + dev_err(dev, "Failed to get calibration nvmem cell (%ld)\n",
> > + PTR_ERR(calcell));
> > +
> > if (PTR_ERR(calcell) == -EPROBE_DEFER)
> > return -EPROBE_DEFER;
> > +
> > /*
> > * Even if the external calibration data stored in sid is
> > * not accessible, the THS hardware can still work, although
> > @@ -308,6 +312,8 @@ static int sun8i_ths_calibrate(struct ths_device *tmdev)
> > caldata = nvmem_cell_read(calcell, &callen);
> > if (IS_ERR(caldata)) {
> > ret = PTR_ERR(caldata);
> > + dev_err(dev, "Failed to read calibration data (%d)\n",
> > + ret);
> > goto out;
> > }
> >
> > @@ -330,23 +336,35 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
> > return PTR_ERR(base);
> >
> > tmdev->regmap = devm_regmap_init_mmio(dev, base, &config);
> > - if (IS_ERR(tmdev->regmap))
> > + if (IS_ERR(tmdev->regmap)) {
> > + dev_err(dev, "Failed to init regmap (%ld)\n",
> > + PTR_ERR(tmdev->regmap));
> > return PTR_ERR(tmdev->regmap);
> > + }
> >
> > if (tmdev->chip->has_bus_clk_reset) {
> > tmdev->reset = devm_reset_control_get(dev, NULL);
> > - if (IS_ERR(tmdev->reset))
> > + if (IS_ERR(tmdev->reset)) {
> > + dev_err(dev, "Failed to get reset (%ld)\n",
> > + PTR_ERR(tmdev->reset));
> > return PTR_ERR(tmdev->reset);
> > + }
> >
> > tmdev->bus_clk = devm_clk_get(&pdev->dev, "bus");
> > - if (IS_ERR(tmdev->bus_clk))
> > + if (IS_ERR(tmdev->bus_clk)) {
> > + dev_err(dev, "Failed to get bus clock (%ld)\n",
> > + PTR_ERR(tmdev->bus_clk));
> > return PTR_ERR(tmdev->bus_clk);
> > + }
> > }
> >
> > if (tmdev->chip->has_mod_clk) {
> > tmdev->mod_clk = devm_clk_get(&pdev->dev, "mod");
> > - if (IS_ERR(tmdev->mod_clk))
> > + if (IS_ERR(tmdev->mod_clk)) {
> > + dev_err(dev, "Failed to get mod clock (%ld)\n",
> > + PTR_ERR(tmdev->mod_clk));
> > return PTR_ERR(tmdev->mod_clk);
> > + }
> > }
> >
> > ret = reset_control_deassert(tmdev->reset);
> > @@ -471,8 +489,12 @@ static int sun8i_ths_register(struct ths_device *tmdev)
> > i,
> > &tmdev->sensor[i],
> > &ths_ops);
> > - if (IS_ERR(tmdev->sensor[i].tzd))
> > + if (IS_ERR(tmdev->sensor[i].tzd)) {
> > + dev_err(tmdev->dev,
> > + "Failed to register sensor %d (%ld)\n",
> > + i, PTR_ERR(tmdev->sensor[i].tzd));
> > return PTR_ERR(tmdev->sensor[i].tzd);
> > + }
> >
> > if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd))
> > dev_warn(tmdev->dev,
> > @@ -501,19 +523,21 @@ static int sun8i_ths_probe(struct platform_device *pdev)
> >
> > ret = sun8i_ths_resource_init(tmdev);
> > if (ret)
> > - return ret;
> > + goto err_out;
> >
> > irq = platform_get_irq(pdev, 0);
> > - if (irq < 0)
> > - return irq;
> > + if (irq < 0) {
> > + ret = irq;
> > + goto err_out;
> > + }
> >
> > ret = tmdev->chip->init(tmdev);
> > if (ret)
> > - return ret;
> > + goto err_out;
> >
> > ret = sun8i_ths_register(tmdev);
> > if (ret)
> > - return ret;
> > + goto err_out;
> >
> > /*
> > * Avoid entering the interrupt handler, the thermal device is not
> > @@ -523,10 +547,17 @@ static int sun8i_ths_probe(struct platform_device *pdev)
> > ret = devm_request_threaded_irq(dev, irq, NULL,
> > sun8i_irq_thread,
> > IRQF_ONESHOT, "ths", tmdev);
> > - if (ret)
> > - return ret;
> > + if (ret) {
> > + dev_err(dev, "Failed to request irq (%d)\n", ret);
> > + goto err_out;
> > + }
> >
> > + dev_info(dev, "Thermal sensor ready!\n");
> > return 0;
> > +
> > +err_out:
> > + dev_err(dev, "Failed to probe thermal sensor (%d)\n", ret);
>
> When the driver fails, there will be this print. Isn't it superfluous
> for you to add these？
>
> sun8i-thermal: probe of 5070400.thermal-sensor failed with error
There's no such failure message in the case I investigated, which is
EPROBE_DEFER failure waiting for nvmem driver that never loads,
because it's not configured by the user to build.
regards,
o.
>
> Yangtao
Powered by blists - more mailing lists