linux-kernel - Re: [PATCH v2] net: ethernet: mtk_eth

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200709203134.GI1551@shell.armlinux.org.uk>
Date:   Thu, 9 Jul 2020 21:31:34 +0100
From:   Russell King - ARM Linux admin <linux@...linux.org.uk>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     Frank Wunderlich <frank-w@...lic-files.de>, netdev@...r.kernel.org,
        Sean Wang <sean.wang@...iatek.com>,
        linux-kernel@...r.kernel.org,
        "David S. Miller" <davem@...emloft.net>,
        René van Dorst <opensource@...rst.com>,
        linux-mediatek@...ts.infradead.org,
        John Crispin <john@...ozen.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Mark Lee <Mark-MC.Lee@...iatek.com>,
        linux-arm-kernel@...ts.infradead.org, Felix Fietkau <nbd@....name>
Subject: Re: [PATCH v2] net: ethernet: mtk_eth_soc: fix mtu warning

On Thu, Jul 09, 2020 at 03:41:15PM +0200, Andrew Lunn wrote:
> On Thu, Jul 09, 2020 at 07:57:42AM +0200, Frank Wunderlich wrote:
> > From: René van Dorst <opensource@...rst.com>
> > 
> > in recent Kernel-Versions there are warnings about incorrect MTU-Size
> > like these:
> > 
> > mt7530 mdio-bus:00: nonfatal error -95 setting MTU on port x
> > eth0: mtu greater than device maximum
> > mtk_soc_eth 1b100000.ethernet eth0: error -22 setting MTU to include DSA overhead
> > 
> > Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
> > Fixes: 72579e14a1d3 ("net: dsa: don't fail to probe if we couldn't set the MTU")
> > Fixes: 7a4c53bee332 ("net: report invalid mtu value via netlink extack")
> > Signed-off-by: René van Dorst <opensource@...rst.com>
> > Signed-off-by: Frank Wunderlich <frank-w@...lic-files.de>
> > ---
> > changes in v2:
> >   Fixes: tag show 12-chars of sha1 and moved above other tags
> > ---
> >  drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> > index 85735d32ecb0..00e3d70f7d07 100644
> > --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> > +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> > @@ -2891,6 +2891,10 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
> >  	eth->netdev[id]->irq = eth->irq[0];
> >  	eth->netdev[id]->dev.of_node = np;
> > 
> > +	eth->netdev[id]->mtu = 1536;
> 
> Hi Frank
> 
> Don't change to MTU from the default. Anybody using this interface for
> non-DSA traffic expects the default MTU. DSA will change it as needed.
> 
> > +	eth->netdev[id]->min_mtu = ETH_MIN_MTU;
> 
> No need to set the minimum. ether_setup() will initialize it.
> 
> > +	eth->netdev[id]->max_mtu = 1536;
> 
> I assume this is enough to make the DSA warning go away, but it is the
> true max? I have a similar patch for the FEC driver which i should
> post sometime. Reviewing the FEC code and after some testing, i found
> the real max was 2K - 64.

Are there any plans to solve these warnings for Marvell 88e6xxx DSA ports?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!