linux-kernel - [PATCH v7 11/11] dmaengine: dw: Initialize max_sg

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200709224550.15539-12-Sergey.Semin@baikalelectronics.ru>
Date:   Fri, 10 Jul 2020 01:45:50 +0300
From:   Serge Semin <Sergey.Semin@...kalelectronics.ru>
To:     Vinod Koul <vkoul@...nel.org>, Viresh Kumar <vireshk@...nel.org>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Dan Williams <dan.j.williams@...el.com>
CC:     Serge Semin <Sergey.Semin@...kalelectronics.ru>,
        Serge Semin <fancer.lancer@...il.com>,
        Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
        Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        Arnd Bergmann <arnd@...db.de>,
        Rob Herring <robh+dt@...nel.org>, <linux-mips@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <dmaengine@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v7 11/11] dmaengine: dw: Initialize max_sg_nents capability

Multi-block support provides a way to map the kernel-specific SG-table so
the DW DMA device would handle it as a whole instead of handling the
SG-list items or so called LLP block items one by one. So if true LLP
list isn't supported by the DW DMA engine, then soft-LLP mode will be
utilized to load and execute each LLP-block one by one. The soft-LLP mode
of the DMA transactions execution might not work well for some DMA
consumers like SPI due to its Tx and Rx buffers inter-dependency. Let's
initialize the max_sg_nents DMA channels capability based on the nollp
flag state. If it's true, no hardware accelerated LLP is available and
max_sg_nents should be set with 1, which means that the DMA engine
can handle only a single SG list entry at a time. If noLLP is set to
false, then hardware accelerated LLP is supported and the DMA engine
can handle infinite number of SG entries in a single DMA transaction.

Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: linux-mips@...r.kernel.org
Cc: devicetree@...r.kernel.org

---

Changelog v3:
- This is a new patch created as a result of the discussion with Vinud and
  Andy in the framework of DW DMA burst and LLP capabilities.

Changelog v4:
- Use explicit if-else statement when assigning the max_sg_nents field.
---
 drivers/dma/dw/core.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 588b9bae827c..9dee5fa65153 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -1059,6 +1059,18 @@ static void dwc_caps(struct dma_chan *chan, struct dma_slave_caps *caps)
 	struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
 
 	caps->max_burst = dwc->max_burst;
+
+	/*
+	 * It might be crucial for some devices to have the hardware
+	 * accelerated multi-block transfers supported, aka LLPs in DW DMAC
+	 * notation. So if LLPs are supported then max_sg_nents is set to
+	 * zero which means unlimited number of SG entries can be handled in a
+	 * single DMA transaction, otherwise it's just one SG entry.
+	 */
+	if (dwc->nollp)
+		caps->max_sg_nents = 1;
+	else
+		caps->max_sg_nents = 0;
 }
 
 int do_dma_probe(struct dw_dma_chip *chip)
-- 
2.26.2