| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DM6PR11MB3227DE41730A08B57B9C14DCFE640@DM6PR11MB3227.namprd11.prod.outlook.com>
Date: Thu, 9 Jul 2020 07:54:56 +0000
From: "Langer, Thomas" <thomas.langer@...el.com>
To: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@...ux.intel.com>,
"dmaengine@...r.kernel.org" <dmaengine@...r.kernel.org>,
"vkoul@...nel.org" <vkoul@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Shevchenko, Andriy" <andriy.shevchenko@...el.com>,
"chuanhua.lei@...ux.intel.com" <chuanhua.lei@...ux.intel.com>,
"Kim, Cheol Yong" <cheol.yong.kim@...el.com>,
"Wu, Qiming" <qi-ming.wu@...el.com>,
"malliamireddy009@...il.com" <malliamireddy009@...il.com>
Subject: RE: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
> -----Original Message-----
> From: devicetree-owner@...r.kernel.org <devicetree-
> owner@...r.kernel.org> On Behalf Of Amireddy Mallikarjuna reddy
> Sent: Donnerstag, 9. Juli 2020 08:01
> To: dmaengine@...r.kernel.org; vkoul@...nel.org;
> devicetree@...r.kernel.org; robh+dt@...nel.org
> Cc: linux-kernel@...r.kernel.org; Shevchenko, Andriy
> <andriy.shevchenko@...el.com>; chuanhua.lei@...ux.intel.com; Kim, Cheol
> Yong <cheol.yong.kim@...el.com>; Wu, Qiming <qi-ming.wu@...el.com>;
> malliamireddy009@...il.com; Amireddy Mallikarjuna reddy
> <mallikarjunax.reddy@...ux.intel.com>
> Subject: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
>
> Add DT bindings YAML schema for DMA controller driver
> of Lightning Mountain(LGM) SoC.
>
> Signed-off-by: Amireddy Mallikarjuna reddy
> <mallikarjunax.reddy@...ux.intel.com>
> ---
> v1:
> - Initial version.
>
> v2:
> - Fix bot errors.
>
> v3:
> - No change.
>
> v4:
> - Address Thomas langer comments
Please read my comments again and then respond about the topics you ignored.
I added some hints below again.
Thanks.
> ---
> .../devicetree/bindings/dma/intel,ldma.yaml | 416
> +++++++++++++++++++++
> 1 file changed, 416 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/dma/intel,ldma.yaml
>
> diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> new file mode 100644
> index 000000000000..7f666b9812e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> @@ -0,0 +1,416 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Lightning Mountain centralized low speed DMA and high speed DMA
> controllers.
> +
> +maintainers:
> + - chuanhua.lei@...el.com
> + - mallikarjunax.reddy@...el.com
> +
> +properties:
> + $nodename:
> + pattern: "^dma(@.*)?$"
Please explain the difference to the common dma binding.
> +
> + "#dma-cells":
> + const: 1
> +
> + compatible:
> + anyOf:
> + - const: intel,lgm-cdma
> + - const: intel,lgm-dma2tx
> + - const: intel,lgm-dma1rx
> + - const: intel,lgm-dma1tx
> + - const: intel,lgm-dma0tx
> + - const: intel,lgm-dma3
> + - const: intel,lgm-toe-dma30
> + - const: intel,lgm-toe-dma31
Please explain why you need so many different compatible strings.
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + intel,dma-poll-cnt:
> + $ref: /schemas/types.yaml#definitions/uint32
> + description:
> + DMA descriptor polling counter. It may need fine tune according
> + to the system application scenario.
> +
> + intel,dma-byte-en:
> + type: boolean
> + description:
> + DMA byte enable is only valid for DMA write(RX).
> + Byte enable(1) means DMA write will be based on the number of
> dwords
> + instead of the whole burst.
> +
> + intel,dma-drb:
> + type: boolean
> + description:
> + DMA descriptor read back to make sure data and desc
> synchronization.
> +
> + intel,dma-burst:
> + $ref: /schemas/types.yaml#definitions/uint32
> + description:
> + Specifiy the DMA burst size(in dwords), the valid value will be
> 8, 16, 32.
> + Default is 16 for data path dma, 32 is for memcopy DMA.
> +
> + intel,dma-polling-cnt:
> + $ref: /schemas/types.yaml#definitions/uint32
> + description:
> + DMA descriptor polling counter. It may need fine tune according
> to
> + the system application scenario.
> +
> + intel,dma-desc-in-sram:
> + type: boolean
> + description:
> + DMA descritpors in SRAM or not. Some old controllers descriptors
> + can be in DRAM or SRAM. The new ones are all in SRAM.
> +
> + intel,dma-orrc:
> + $ref: /schemas/types.yaml#definitions/uint32
> + description:
> + DMA outstanding read counter. The maximum value is 16, and it
> may
> + need fine tune according to the system application scenarios.
> +
> + intel,dma-dburst-wr:
> + type: boolean
> + description:
> + Enable RX dynamic burst write. It only applies to RX DMA and
> memcopy DMA.
> +
> +
> + dma-ports:
> + type: object
> + description:
> + This sub-node must contain a sub-node for each DMA port.
> + properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> +
> + patternProperties:
> + "^dma-ports@[0-9]+$":
> + type: object
> +
> + properties:
> + reg:
> + items:
> + - enum: [0, 1, 2, 3, 4, 5]
> + description:
> + Which port this node refers to.
> +
> + intel,name:
> + $ref: /schemas/types.yaml#definitions/string-array
> + description:
> + Port name of each DMA port.
> +
> + intel,chans:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description:
> + The channels included on this port. Format is channel
> start
> + number and how many channels on this port.
> +
> + intel,burst:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Specify the DMA port burst size, the valid value will
> be
> + 2, 4, 8. Default is 2 for data path dma.
> +
> + intel,txwgt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Specify the port transmit weight for QoS purpose. The
> valid
> + value is 1~7. Default value is 1.
> +
> + intel,endian:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Specify the DMA port endiannes conversion due to SoC
> endianness difference.
> +
> + required:
> + - reg
> + - intel,name
> + - intel,chans
> +
> +
> + dma-channels:
> + type: object
> + description:
> + This sub-node must contain a sub-node for each DMA channel.
> + properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> +
> + patternProperties:
> + "^dma-channels@[0-9]+$":
> + type: object
> +
> + properties:
> + reg:
> + items:
> + - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
> 14, 15]
> + description:
> + Which channel this node refers to.
> +
> + intel,desc_num:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Per channel maximum descriptor number. The max value
> is 255.
> +
> + intel,pkt_sz:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Channel buffer packet size. It must be power of 2.
> + The maximum size is 4096.
> +
> + intel,desc-rx-nonpost:
> + type: boolean
> + description:
> + Write non-posted type for DMA RX last data beat of
> every descriptor.
> +
> + intel,data-endian:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Per channel data endianness configuration according to
> SoC requirement.
> +
> + intel,desc-endian:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Per channel descriptor endianness configuration
> according to SoC requirement.
> +
> + intel,data-endian-en:
> + type: boolean
> + description:
> + Per channel data endianness enabled.
> +
> + intel,desc-endian-en:
> + type: boolean
> + description:
> + Per channel descriptor endianness enabled.
> +
> + intel,byte-offset:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Per channel byte offset(0~128).
> +
> + intel,hdr-mode:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description:
> + The first parameter is header mode size, the second
> + parameter is checksum enable or disable. If enabled,
> + header mode size is ignored. If disabled, header mode
> + size must be provided.
> +
> + intel,non-arb-cnt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Per channel non arbitration counter while polling
> +
> + intel,arb-cnt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Per channel arbitration counter while polling.
> + arb_cnt must be greater than non_arb_cnt
> +
> + intel,pkt-drop:
> + type: boolean
> + description:
> + Channel packet drop enabled or disabled.
> +
> + intel,hw-desc:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description:
> + Per channel dma hardware descriptor configuration.
> + The first parameter is descriptor physical address and
> the
> + second parameter hardware descriptor number.
> +
> + required:
> + - reg
> +
> +required:
> + - compatible
> + - reg
> + - '#dma-cells'
> +
> +examples:
> + - |
> + dma0: dma@...00000 {
> + compatible = "intel,lgm-cdma";
> + reg = <0xe0e00000 0x1000>;
> + #dma-cells = <1>;
> + interrupt-parent = <&ioapic1>;
> + interrupts = <82 1>;
> + resets = <&rcu0 0x30 0>;
> + reset-names = "ctrl";
> + clocks = <&cgu0 80>;
> + intel,dma-poll-cnt = <4>;
> + intel,dma-byte-en;
> + intel,dma-drb;
> + dma-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dma-ports@0 {
> + reg = <0>;
> + intel,name = "SPI0";
> + intel,chans = <0 2>;
> + intel,burst = <2>;
> + intel,txwgt = <1>;
> + };
> + dma-ports@1 {
> + reg = <1>;
> + intel,name = "SPI1";
> + intel,chans = <2 2>;
> + intel,burst = <2>;
> + intel,txwgt = <1>;
> + };
> + dma-ports@2 {
> + reg = <2>;
> + intel,name = "SPI2";
> + intel,chans = <4 2>;
> + intel,burst = <2>;
> + intel,txwgt = <1>;
> + };
> + dma-ports@3 {
> + reg = <3>;
> + intel,name = "SPI3";
> + intel,chans = <6 2>;
> + intel,burst = <2>;
> + intel,endian = <0>;
> + intel,txwgt = <1>;
> + };
> + dma-ports@4 {
> + reg = <4>;
> + intel,name = "HSNAND";
> + intel,chans = <8 2>;
> + intel,burst = <8>;
> + intel,txwgt = <1>;
> + };
> + dma-ports@5 {
> + reg = <5>;
> + intel,name = "PCM";
> + intel,chans = <10 6>;
> + intel,burst = <8>;
> + intel,txwgt = <1>;
> + };
> + };
> + dma-channels {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dma-channels@0 {
> + reg = <0>;
> + intel,desc_num = <1>;
> + };
> + dma-channels@1 {
> + reg = <1>;
> + intel,desc_num = <1>;
> + };
> + dma-channels@2 {
> + reg = <2>;
> + intel,desc_num = <1>;
> + };
> + dma-channels@3 {
> + reg = <3>;
> + intel,desc_num = <1>;
> + };
> + dma-channels@4 {
> + reg = <4>;
> + intel,desc_num = <1>;
> + };
> + dma-channels@5 {
> + reg = <5>;
> + intel,desc_num = <1>;
> + };
> + dma-channels@6 {
> + reg = <6>;
> + intel,desc_num = <1>;
> + };
> + dma-channels@7 {
> + reg = <7>;
> + intel,desc_num = <1>;
> + };
> + dma-channels@8 {
> + reg = <8>;
> + };
> + dma-channels@9 {
> + reg = <9>;
> + };
> + dma-channels@10 {
> + reg = <10>;
> + };
> + dma-channels@11 {
> + reg = <11>;
> + };
> + dma-channels@12 {
> + reg = <12>;
> + };
> + dma-channels@13 {
> + reg = <13>;
> + };
> + dma-channels@14 {
> + reg = <14>;
> + };
> + dma-channels@15 {
> + reg = <15>;
> + };
> + };
> + };
> + - |
> + dma3: dma@...00000 {
> + compatible = "intel,lgm-dma3";
> + reg = <0xec800000 0x1000>;
> + clocks = <&cgu0 71>;
> + resets = <&rcu0 0x10 9>;
> + #dma-cells = <1>;
> + intel,dma-burst = <32>;
> + intel,dma-polling-cnt = <16>;
> + intel,dma-desc-in-sram;
> + intel,dma-orrc = <16>;
> + intel,dma-byte-en;
> + intel,dma-dburst-wr;
> + dma-channels {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dma-channels@12 {
> + reg = <12>;
> + intel,pkt_sz = <4096>;
> + intel,desc-rx-nonpost;
> + intel,data-endian = <0>;
> + intel,desc-endian = <0>;
> + intel,data-endian-en;
> + intel,desc-endian-en;
> + intel,byte-offset = <0>;
> + intel,hdr-mode = <128 0>;
> + intel,non-arb-cnt = <0>;
> + intel,arb-cnt = <0>;
> + intel,hw-desc = <0x20000000 8>;
> + };
> + dma-channels@13 {
> + reg = <13>;
> + intel,pkt-drop;
> + intel,pkt_sz = <4096>;
> + intel,data-endian = <0>;
> + intel,desc-endian = <0>;
> + intel,data-endian-en;
> + intel,desc-endian-en;
> + intel,byte-offset = <0>;
> + intel,hdr-mode = <128 0>;
> + intel,non-arb-cnt = <0>;
> + intel,arb-cnt = <0>;
> + };
> + };
> + };
> --
> 2.11.0
Powered by blists - more mailing lists