| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200709112439.6069-1-mail@mariuszachmann.de>
Date: Thu, 9 Jul 2020 13:24:39 +0200
From: Marius Zachmann <mail@...iuszachmann.de>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Marius Zachmann <mail@...iuszachmann.de>,
Jean Delvare <jdelvare@...e.com>,
Jonathan Corbet <corbet@....net>, linux-hwmon@...r.kernel.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] hwmon: corsair-cpro: add fan_target
This adds fan_target entries to the corsair-cpro driver.
Reading the attribute from the device does not seem possible, so
it returns the last set value. (same as pwm)
Furthermore:
- removes unnecessary kernel.h include.
- send_usb_cmd now has one more argument which is needed for the
fan_target command.
Signed-off-by: Marius Zachmann <mail@...iuszachmann.de>
---
Documentation/hwmon/corsair-cpro.rst | 3 ++
drivers/hwmon/corsair-cpro.c | 62 ++++++++++++++++++++++------
2 files changed, 53 insertions(+), 12 deletions(-)
diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst
index 5913e23d764c..080f063d74b6 100644
--- a/Documentation/hwmon/corsair-cpro.rst
+++ b/Documentation/hwmon/corsair-cpro.rst
@@ -33,6 +33,9 @@ in2_input Voltage on SATA 3.3v
temp[1-4]_input Temperature on connected temperature sensors
fan[1-6]_input Connected fan rpm.
fan[1-6]_label Shows fan type as detected by the device.
+fan[1-6]_set_target Sets fan speed target rpm. Values from 0-65535.
+ When reading, it reports the last value if it was set by the driver.
+ Otherwise returns 0.
pwm[1-6] Sets the fan speed. Values from 0-255.
When reading, it reports the last value if it was set by the driver.
Otherwise returns 0.
diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c
index a22583acc229..a2cb2b474f08 100644
--- a/drivers/hwmon/corsair-cpro.c
+++ b/drivers/hwmon/corsair-cpro.c
@@ -5,7 +5,6 @@
*/
#include <linux/bitops.h>
-#include <linux/kernel.h>
#include <linux/hwmon.h>
#include <linux/module.h>
#include <linux/mutex.h>
@@ -51,6 +50,12 @@
* send: byte 1 is fan number
* send: byte 2 is percentage from 0 - 100
*/
+#define CTL_SET_FAN_TARGET 0x24 /*
+ * set target rpm
+ * send: byte 1 is fan number
+ * send: byte 2-3 is target
+ * device accepts all values from 0x00 - 0xFFFF
+ */
#define NUM_FANS 6
#define NUM_TEMP_SENSORS 4
@@ -60,13 +65,14 @@ struct ccp_device {
struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */
u8 *buffer;
int pwm[6];
+ int target[6];
DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS);
DECLARE_BITMAP(fan_cnct, NUM_FANS);
char fan_label[6][LABEL_LENGTH];
};
/* send command, check for error in response, response in ccp->buffer */
-static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2)
+static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2, u8 byte3)
{
int actual_length;
int ret;
@@ -75,6 +81,7 @@ static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2)
ccp->buffer[0] = command;
ccp->buffer[1] = byte1;
ccp->buffer[2] = byte2;
+ ccp->buffer[3] = byte3;
ret = usb_bulk_msg(ccp->udev, usb_sndintpipe(ccp->udev, 2), ccp->buffer, OUT_BUFFER_SIZE,
&actual_length, 1000);
@@ -103,7 +110,7 @@ static int get_data(struct ccp_device *ccp, int command, int channel)
mutex_lock(&ccp->mutex);
- ret = send_usb_cmd(ccp, command, channel, 0);
+ ret = send_usb_cmd(ccp, command, channel, 0, 0);
if (ret)
goto out_unlock;
@@ -128,7 +135,24 @@ static int set_pwm(struct ccp_device *ccp, int channel, long val)
mutex_lock(&ccp->mutex);
- ret = send_usb_cmd(ccp, CTL_SET_FAN_FPWM, channel, val);
+ ret = send_usb_cmd(ccp, CTL_SET_FAN_FPWM, channel, val, 0);
+
+ mutex_unlock(&ccp->mutex);
+ return ret;
+}
+
+static int set_target(struct ccp_device *ccp, int channel, long val)
+{
+ int ret;
+
+ if (val < 0 || val > 0xFFFF)
+ return -EINVAL;
+
+ ccp->target[channel] = val;
+
+ mutex_lock(&ccp->mutex);
+
+ ret = send_usb_cmd(ccp, CTL_SET_FAN_TARGET, channel, val >> 8, val);
mutex_unlock(&ccp->mutex);
return ret;
@@ -183,6 +207,11 @@ static int ccp_read(struct device *dev, enum hwmon_sensor_types type,
return ret;
*val = ret;
return 0;
+ case hwmon_fan_target:
+ /* how to read target values from the device is unknown */
+ /* driver returns last set value or 0 */
+ *val = ccp->target[channel];
+ return 0;
default:
break;
}
@@ -231,6 +260,13 @@ static int ccp_write(struct device *dev, enum hwmon_sensor_types type,
break;
}
break;
+ case hwmon_fan:
+ switch (attr) {
+ case hwmon_fan_target:
+ return set_target(ccp, channel, val);
+ default:
+ break;
+ }
default:
break;
}
@@ -266,6 +302,8 @@ static umode_t ccp_is_visible(const void *data, enum hwmon_sensor_types type,
return 0444;
case hwmon_fan_label:
return 0444;
+ case hwmon_fan_target:
+ return 0644;
default:
break;
}
@@ -313,12 +351,12 @@ static const struct hwmon_channel_info *ccp_info[] = {
HWMON_T_INPUT
),
HWMON_CHANNEL_INFO(fan,
- HWMON_F_INPUT | HWMON_F_LABEL,
- HWMON_F_INPUT | HWMON_F_LABEL,
- HWMON_F_INPUT | HWMON_F_LABEL,
- HWMON_F_INPUT | HWMON_F_LABEL,
- HWMON_F_INPUT | HWMON_F_LABEL,
- HWMON_F_INPUT | HWMON_F_LABEL
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET
),
HWMON_CHANNEL_INFO(pwm,
HWMON_PWM_INPUT,
@@ -348,7 +386,7 @@ static int get_fan_cnct(struct ccp_device *ccp)
int mode;
int ret;
- ret = send_usb_cmd(ccp, CTL_GET_FAN_CNCT, 0, 0);
+ ret = send_usb_cmd(ccp, CTL_GET_FAN_CNCT, 0, 0, 0);
if (ret)
return ret;
@@ -385,7 +423,7 @@ static int get_temp_cnct(struct ccp_device *ccp)
int mode;
int ret;
- ret = send_usb_cmd(ccp, CTL_GET_TMP_CNCT, 0, 0);
+ ret = send_usb_cmd(ccp, CTL_GET_TMP_CNCT, 0, 0, 0);
if (ret)
return ret;
--
2.27.0
Powered by blists - more mailing lists