Message-ID: <CAF6AEGuD8+goHa8geZgR89aD2Pb84LT_24bzAbTdL-G-=LWU5A@mail.gmail.com>
Date:   Fri, 10 Jul 2020 10:08:02 -0700
From:   Rob Clark <robdclark@...il.com>
To:     Kalyan Thota <kalyan_t@...eaurora.org>
Cc:     dri-devel <dri-devel@...ts.freedesktop.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        freedreno <freedreno@...ts.freedesktop.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Sean Paul <seanpaul@...omium.org>,
        "Kristian H. Kristensen" <hoegsberg@...omium.org>,
        Douglas Anderson <dianders@...omium.org>,
        Krishna Manikandan <mkrishn@...eaurora.org>,
        Raviteja Tamatam <travitej@...eaurora.org>,
        nganji@...eaurora.org
Subject: Re: [v1] drm/msm/dpu: add support for clk and bw scaling for display

On Thu, Jun 18, 2020 at 7:09 AM Kalyan Thota <kalyan_t@...eaurora.org> wrote:
>
> This change adds support to scale src clk and bandwidth as
> per composition requirements.
>
> Interconnect registration for bw has been moved to mdp
> device node from mdss to facilitate the scaling.
>
> Changes in v1:
>  - Address armv7 compilation issues with the patch (Rob)
>
> Signed-off-by: Kalyan Thota <kalyan_t@...eaurora.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c  | 109 +++++++++++++++++++++----
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |   5 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |   4 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c        |  37 ++++++++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h        |   4 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c       |   9 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c      |  84 +++++++++++++++++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h      |   4 +
>  8 files changed, 233 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 7c230f7..e52bc44 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -29,6 +29,74 @@ enum dpu_perf_mode {
>         DPU_PERF_MODE_MAX
>  };
>
> +/**
> + * @_dpu_core_perf_calc_bw() - to calculate BW per crtc
> + * @kms -  pointer to the dpu_kms
> + * @crtc - pointer to a crtc
> + * Return: returns aggregated BW for all planes in crtc.
> + */
> +static u64 _dpu_core_perf_calc_bw(struct dpu_kms *kms,
> +               struct drm_crtc *crtc)
> +{
> +       struct drm_plane *plane;
> +       struct dpu_plane_state *pstate;
> +       u64 crtc_plane_bw = 0;
> +       u32 bw_factor;
> +
> +       drm_atomic_crtc_for_each_plane(plane, crtc) {
> +               pstate = to_dpu_plane_state(plane->state);
> +               if (!pstate)
> +                       continue;
> +
> +               crtc_plane_bw += pstate->plane_fetch_bw;
> +       }
> +
> +       bw_factor = kms->catalog->perf.bw_inefficiency_factor;
> +       if (bw_factor) {
> +               crtc_plane_bw *= bw_factor;
> +               do_div(crtc_plane_bw, 100);
> +       }
> +
> +       return crtc_plane_bw;
> +}
> +
> +/**
> + * _dpu_core_perf_calc_clk() - to calculate clock per crtc
> + * @kms -  pointer to the dpu_kms
> + * @crtc - pointer to a crtc
> + * @state - pointer to a crtc state
> + * Return: returns max clk for all planes in crtc.
> + */
> +static u64 _dpu_core_perf_calc_clk(struct dpu_kms *kms,
> +               struct drm_crtc *crtc, struct drm_crtc_state *state)
> +{
> +       struct drm_plane *plane;
> +       struct dpu_plane_state *pstate;
> +       struct drm_display_mode *mode;
> +       u64 crtc_clk;
> +       u32 clk_factor;
> +
> +       mode = &state->adjusted_mode;
> +
> +       crtc_clk = mode->vtotal * mode->hdisplay * drm_mode_vrefresh(mode);
> +
> +       drm_atomic_crtc_for_each_plane(plane, crtc) {
> +               pstate = to_dpu_plane_state(plane->state);
> +               if (!pstate)
> +                       continue;
> +
> +               crtc_clk = max(pstate->plane_clk, crtc_clk);
> +       }
> +
> +       clk_factor = kms->catalog->perf.clk_inefficiency_factor;
> +       if (clk_factor) {
> +               crtc_clk *= clk_factor;
> +               do_div(crtc_clk, 100);
> +       }
> +
> +       return crtc_clk;
> +}
> +
>  static struct dpu_kms *_dpu_crtc_get_kms(struct drm_crtc *crtc)
>  {
>         struct msm_drm_private *priv;
> @@ -51,12 +119,7 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
>         dpu_cstate = to_dpu_crtc_state(state);
>         memset(perf, 0, sizeof(struct dpu_core_perf_params));
>
> -       if (!dpu_cstate->bw_control) {
> -               perf->bw_ctl = kms->catalog->perf.max_bw_high *
> -                                       1000ULL;
> -               perf->max_per_pipe_ib = perf->bw_ctl;
> -               perf->core_clk_rate = kms->perf.max_core_clk_rate;
> -       } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
> +       if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
>                 perf->bw_ctl = 0;
>                 perf->max_per_pipe_ib = 0;
>                 perf->core_clk_rate = 0;
> @@ -64,6 +127,10 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
>                 perf->bw_ctl = kms->perf.fix_core_ab_vote;
>                 perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
>                 perf->core_clk_rate = kms->perf.fix_core_clk_rate;
> +       } else {
> +               perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
> +               perf->max_per_pipe_ib = kms->catalog->perf.min_dram_ib;
> +               perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
>         }
>
>         DPU_DEBUG(
> @@ -115,11 +182,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
>                         DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n",
>                                 tmp_crtc->base.id, tmp_cstate->new_perf.bw_ctl,
>                                 tmp_cstate->bw_control);
> -                       /*
> -                        * For bw check only use the bw if the
> -                        * atomic property has been already set
> -                        */
> -                       if (tmp_cstate->bw_control)
> +
>                                 bw_sum_of_intfs += tmp_cstate->new_perf.bw_ctl;
>                 }
>
> @@ -131,9 +194,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
>
>                 DPU_DEBUG("final threshold bw limit = %d\n", threshold);
>
> -               if (!dpu_cstate->bw_control) {
> -                       DPU_DEBUG("bypass bandwidth check\n");
> -               } else if (!threshold) {
> +               if (!threshold) {
>                         DPU_ERROR("no bandwidth limits specified\n");
>                         return -E2BIG;
>                 } else if (bw > threshold) {
> @@ -154,7 +215,11 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
>                                         = dpu_crtc_get_client_type(crtc);
>         struct drm_crtc *tmp_crtc;
>         struct dpu_crtc_state *dpu_cstate;
> -       int ret = 0;
> +       int i, ret = 0;
> +       u64 avg_bw;
> +
> +       if (!kms->num_paths)
> +               return -EINVAL;
>
>         drm_for_each_crtc(tmp_crtc, crtc->dev) {
>                 if (tmp_crtc->enabled &&
> @@ -165,10 +230,20 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
>                         perf.max_per_pipe_ib = max(perf.max_per_pipe_ib,
>                                         dpu_cstate->new_perf.max_per_pipe_ib);
>
> -                       DPU_DEBUG("crtc=%d bw=%llu\n", tmp_crtc->base.id,
> -                                       dpu_cstate->new_perf.bw_ctl);
> +                       perf.bw_ctl += dpu_cstate->new_perf.bw_ctl;
> +
> +                       DPU_DEBUG("crtc=%d bw=%llu paths:%d\n",
> +                                 tmp_crtc->base.id,
> +                                 dpu_cstate->new_perf.bw_ctl, kms->num_paths);
>                 }
>         }
> +
> +       avg_bw = perf.bw_ctl;
> +       do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/
> +
> +       for (i = 0; i < kms->num_paths; i++)
> +               icc_set_bw(kms->path[i], avg_bw, perf.max_per_pipe_ib);
> +
>         return ret;
>  }
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 29d4fde..8f2357d 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -541,7 +541,8 @@
>         .max_bw_high = 6800000,
>         .min_core_ib = 2400000,
>         .min_llcc_ib = 800000,
> -       .min_dram_ib = 800000,
> +       .min_dram_ib = 1600000,
> +       .min_prefill_lines = 24,
>         .danger_lut_tbl = {0xff, 0xffff, 0x0},
>         .qos_lut_tbl = {
>                 {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> @@ -558,6 +559,8 @@
>                 {.rd_enable = 1, .wr_enable = 1},
>                 {.rd_enable = 1, .wr_enable = 0}
>         },
> +       .clk_inefficiency_factor = 105,
> +       .bw_inefficiency_factor = 120,
>  };
>
>  /*************************************************************
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index f7de438..f2a5fe2 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -651,6 +651,8 @@ struct dpu_perf_cdp_cfg {
>   * @downscaling_prefill_lines  downscaling latency in lines
>   * @amortizable_theshold minimum y position for traffic shaping prefill
>   * @min_prefill_lines  minimum pipeline latency in lines
> + * @clk_inefficiency_factor DPU src clock inefficiency factor
> + * @bw_inefficiency_factor DPU axi bus bw inefficiency factor
>   * @safe_lut_tbl: LUT tables for safe signals
>   * @danger_lut_tbl: LUT tables for danger signals
>   * @qos_lut_tbl: LUT tables for QoS signals
> @@ -675,6 +677,8 @@ struct dpu_perf_cfg {
>         u32 downscaling_prefill_lines;
>         u32 amortizable_threshold;
>         u32 min_prefill_lines;
> +       u32 clk_inefficiency_factor;
> +       u32 bw_inefficiency_factor;
>         u32 safe_lut_tbl[DPU_QOS_LUT_USAGE_MAX];
>         u32 danger_lut_tbl[DPU_QOS_LUT_USAGE_MAX];
>         struct dpu_qos_lut_tbl qos_lut_tbl[DPU_QOS_LUT_USAGE_MAX];
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index b8615d4..a5da7aa 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -303,6 +303,28 @@ static int dpu_kms_global_obj_init(struct dpu_kms *dpu_kms)
>         return 0;
>  }
>
> +static int dpu_kms_parse_data_bus_icc_path(struct dpu_kms *dpu_kms)
> +{
> +       struct icc_path *path0;
> +       struct icc_path *path1;
> +       struct drm_device *dev = dpu_kms->dev;
> +
> +       path0 = of_icc_get(dev->dev, "mdp0-mem");
> +       path1 = of_icc_get(dev->dev, "mdp1-mem");
> +
> +       if (IS_ERR_OR_NULL(path0))
> +               return PTR_ERR_OR_ZERO(path0);
> +
> +       dpu_kms->path[0] = path0;
> +       dpu_kms->num_paths = 1;
> +
> +       if (!IS_ERR_OR_NULL(path1)) {
> +               dpu_kms->path[1] = path1;
> +               dpu_kms->num_paths++;
> +       }
> +       return 0;
> +}


so wait, why do we need a 2nd nearly identical copy of
dpu_mdss_parse_data_bus_icc_path() for sc7180?  And tracking of the
path in dpu_mdss for some gens and dpu_kms in other gens?

(I have a suspicion that the answer is dpu has too much indirection
and abstraction.)

BR,
-R


> +
>  static int dpu_kms_enable_vblank(struct msm_kms *kms, struct drm_crtc *crtc)
>  {
>         return dpu_crtc_vblank(crtc, true);
> @@ -972,6 +994,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>
>         dpu_vbif_init_memtypes(dpu_kms);
>
> +       if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
> +               dpu_kms_parse_data_bus_icc_path(dpu_kms);
> +
>         pm_runtime_put_sync(&dpu_kms->pdev->dev);
>
>         return 0;
> @@ -1077,7 +1102,7 @@ static int dpu_dev_remove(struct platform_device *pdev)
>
>  static int __maybe_unused dpu_runtime_suspend(struct device *dev)
>  {
> -       int rc = -1;
> +       int i, rc = -1;
>         struct platform_device *pdev = to_platform_device(dev);
>         struct dpu_kms *dpu_kms = platform_get_drvdata(pdev);
>         struct dss_module_power *mp = &dpu_kms->mp;
> @@ -1086,6 +1111,9 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev)
>         if (rc)
>                 DPU_ERROR("clock disable failed rc:%d\n", rc);
>
> +       for (i = 0; i < dpu_kms->num_paths; i++)
> +               icc_set_bw(dpu_kms->path[i], 0, 0);
> +
>         return rc;
>  }
>
> @@ -1097,8 +1125,15 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)
>         struct drm_encoder *encoder;
>         struct drm_device *ddev;
>         struct dss_module_power *mp = &dpu_kms->mp;
> +       int i;
>
>         ddev = dpu_kms->dev;
> +
> +       /* Min vote of BW is required before turning on AXI clk */
> +       for (i = 0; i < dpu_kms->num_paths; i++)
> +               icc_set_bw(dpu_kms->path[i], 0,
> +                       dpu_kms->catalog->perf.min_dram_ib);
> +
>         rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
>         if (rc) {
>                 DPU_ERROR("clock enable failed rc:%d\n", rc);
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> index 4e32d04..94410ca 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> @@ -8,6 +8,8 @@
>  #ifndef __DPU_KMS_H__
>  #define __DPU_KMS_H__
>
> +#include <linux/interconnect.h>
> +
>  #include <drm/drm_drv.h>
>
>  #include "msm_drv.h"
> @@ -137,6 +139,8 @@ struct dpu_kms {
>          * when disabled.
>          */
>         atomic_t bandwidth_ref;
> +       struct icc_path *path[2];
> +       u32 num_paths;
>  };
>
>  struct vsync_info {
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> index 80d3cfc..df0a983 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> @@ -8,7 +8,6 @@
>  #include <linux/irqdesc.h>
>  #include <linux/irqchip/chained_irq.h>
>  #include "dpu_kms.h"
> -#include <linux/interconnect.h>
>
>  #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
>
> @@ -315,9 +314,11 @@ int dpu_mdss_init(struct drm_device *dev)
>         }
>         dpu_mdss->mmio_len = resource_size(res);
>
> -       ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
> -       if (ret)
> -               return ret;
> +       if (!of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss")) {
> +               ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
> +               if (ret)
> +                       return ret;
> +       }
>
>         mp = &dpu_mdss->mp;
>         ret = msm_dss_parse_clock(pdev, mp);
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> index 3b9c33e..6379fe1 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> @@ -132,6 +132,86 @@ static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane)
>  }
>
>  /**
> + * _dpu_plane_calc_bw - calculate bandwidth required for a plane
> + * @Plane: Pointer to drm plane.
> + * Result: Updates calculated bandwidth in the plane state.
> + * BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
> + * Prefill BW Equation: line src bytes * line_time
> + */
> +static void _dpu_plane_calc_bw(struct drm_plane *plane,
> +       struct drm_framebuffer *fb)
> +{
> +       struct dpu_plane *pdpu = to_dpu_plane(plane);
> +       struct dpu_plane_state *pstate;
> +       struct drm_display_mode *mode;
> +       const struct dpu_format *fmt = NULL;
> +       struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
> +       int src_width, src_height, dst_height, fps;
> +       u64 plane_prefill_bw;
> +       u64 plane_bw;
> +       u32 hw_latency_lines;
> +       u64 scale_factor;
> +       int vbp, vpw;
> +
> +       pstate = to_dpu_plane_state(plane->state);
> +       mode = &plane->state->crtc->mode;
> +
> +       fmt = dpu_get_dpu_format_ext(fb->format->format, fb->modifier);
> +
> +       src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect);
> +       src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
> +       dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);
> +       fps = drm_mode_vrefresh(mode);
> +       vbp = mode->vtotal - mode->vsync_end;
> +       vpw = mode->vsync_end - mode->vsync_start;
> +       hw_latency_lines =  dpu_kms->catalog->perf.min_prefill_lines;
> +       scale_factor = src_height > dst_height ?
> +               mult_frac(src_height, 1, dst_height) : 1;
> +
> +       plane_bw =
> +               src_width * mode->vtotal * fps * fmt->bpp *
> +               scale_factor;
> +
> +       plane_prefill_bw =
> +               src_width * hw_latency_lines * fps * fmt->bpp *
> +               scale_factor * mode->vtotal;
> +
> +       do_div(plane_prefill_bw, (vbp+vpw));
> +
> +       pstate->plane_fetch_bw = max(plane_bw, plane_prefill_bw);
> +}
> +
> +/**
> + * _dpu_plane_calc_clk - calculate clock required for a plane
> + * @Plane: Pointer to drm plane.
> + * Result: Updates calculated clock in the plane state.
> + * Clock equation: dst_w * v_total * fps * (src_h / dst_h)
> + */
> +static void _dpu_plane_calc_clk(struct drm_plane *plane)
> +{
> +       struct dpu_plane *pdpu = to_dpu_plane(plane);
> +       struct dpu_plane_state *pstate;
> +       struct drm_display_mode *mode;
> +       int dst_width, src_height, dst_height, fps;
> +
> +       pstate = to_dpu_plane_state(plane->state);
> +       mode = &plane->state->crtc->mode;
> +
> +       src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
> +       dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect);
> +       dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);
> +       fps = drm_mode_vrefresh(mode);
> +
> +       pstate->plane_clk =
> +               dst_width * mode->vtotal * fps;
> +
> +       if (src_height > dst_height) {
> +               pstate->plane_clk *= src_height;
> +               do_div(pstate->plane_clk, dst_height);
> +       }
> +}
> +
> +/**
>   * _dpu_plane_calc_fill_level - calculate fill level of the given source format
>   * @plane:             Pointer to drm plane
>   * @fmt:               Pointer to source buffer format
> @@ -1102,6 +1182,10 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
>         }
>
>         _dpu_plane_set_qos_remap(plane);
> +
> +       _dpu_plane_calc_bw(plane, fb);
> +
> +       _dpu_plane_calc_clk(plane);
>  }
>
>  static void _dpu_plane_atomic_disable(struct drm_plane *plane)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
> index 4569497..ca83b87 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
> @@ -25,6 +25,8 @@
>   * @scaler3_cfg: configuration data for scaler3
>   * @pixel_ext: configuration data for pixel extensions
>   * @cdp_cfg:   CDP configuration
> + * @plane_fetch_bw: calculated BW per plane
> + * @plane_clk: calculated clk per plane
>   */
>  struct dpu_plane_state {
>         struct drm_plane_state base;
> @@ -39,6 +41,8 @@ struct dpu_plane_state {
>         struct dpu_hw_pixel_ext pixel_ext;
>
>         struct dpu_hw_pipe_cdp_cfg cdp_cfg;
> +       u64 plane_fetch_bw;
> +       u64 plane_clk;
>  };
>
>  /**
> --
> 1.9.1
>

Powered by blists - more mailing lists