| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200710052919.2611-5-sumit.semwal@linaro.org>
Date: Fri, 10 Jul 2020 10:59:19 +0530
From: Sumit Semwal <sumit.semwal@...aro.org>
To: agross@...nel.org, bjorn.andersson@...aro.org, lgirdwood@...il.com,
broonie@...nel.org, robh+dt@...nel.org
Cc: nishakumari@...eaurora.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
kgunda@...eaurora.org, rnayak@...eaurora.org,
Sumit Semwal <sumit.semwal@...aro.org>
Subject: [RESEND PATCH v5 4/4] regulator: qcom: Add labibb driver
From: Nisha Kumari <nishakumari@...eaurora.org>
Qualcomm platforms have LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost)
regulators, labibb for short, which are used as power supply for
LCD Mode displays.
This patch adds labibb regulator driver for pmi8998 PMIC, found on
SDM845 platforms.
Signed-off-by: Nisha Kumari <nishakumari@...eaurora.org>
[sumits: reworked the driver design as per upstream review]
Signed-off-by: Sumit Semwal <sumit.semwal@...aro.org>
---
v5: sumits: review comments addressed
- removed dev_info about registering
- removed of_get_child_by_name()
- changed from using STATUS1 register to using ENABLE_CTL; this
allows us to use the regulator_*_regmap helpers and makes this
code cleaner. (In limited testing, STATUS1 seemed to report the
change faster than ENABLE_CTL, but in absence of mechanism to
validate if the regulator has indeed fully ramped when STATUS1
starts flagging, broonie suggested to use the slower ENABLE_CTL
path for safety).
v4: sumits: address review comments from v3, including cleaning up
register_labibb_regulator(), and adapted to updated meaning of
poll_enabled_time.
v3: sumits: addressed review comments from v2; moved to use core
regulator features like enable_time, off_on_delay, and the newly
added poll_enabled_time. Moved the check_enabled functionality
to core framework via poll_enabled_time.
v2: sumits: reworked the driver for more common code, and addressed
review comments from v1
---
drivers/regulator/Kconfig | 10 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom-labibb-regulator.c | 175 ++++++++++++++++++++++
3 files changed, 186 insertions(+)
create mode 100644 drivers/regulator/qcom-labibb-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8f677f5d79b4..c6377df023bc 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1178,5 +1178,15 @@ config REGULATOR_WM8994
This driver provides support for the voltage regulators on the
WM8994 CODEC.
+config REGULATOR_QCOM_LABIBB
+ tristate "QCOM LAB/IBB regulator support"
+ depends on SPMI || COMPILE_TEST
+ help
+ This driver supports Qualcomm's LAB/IBB regulators present on the
+ Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
+ based PMIC implementations. LAB can be used as positive
+ boost regulator and IBB can be used as a negative boost regulator
+ for LCD display panel.
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index e8f163371071..2c2b0861df76 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -88,6 +88,7 @@ obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c
new file mode 100644
index 000000000000..8c7dd1928380
--- /dev/null
+++ b/drivers/regulator/qcom-labibb-regulator.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2020, The Linux Foundation. All rights reserved.
+
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define REG_PERPH_TYPE 0x04
+
+#define QCOM_LAB_TYPE 0x24
+#define QCOM_IBB_TYPE 0x20
+
+#define PMI8998_LAB_REG_BASE 0xde00
+#define PMI8998_IBB_REG_BASE 0xdc00
+
+#define REG_LABIBB_STATUS1 0x08
+#define REG_LABIBB_ENABLE_CTL 0x46
+#define LABIBB_STATUS1_VREG_OK_BIT BIT(7)
+#define LABIBB_CONTROL_ENABLE BIT(7)
+
+#define LAB_ENABLE_CTL_MASK BIT(7)
+#define IBB_ENABLE_CTL_MASK (BIT(7) | BIT(6))
+
+#define LABIBB_OFF_ON_DELAY 1000
+#define LAB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 2)
+#define IBB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 10)
+#define LABIBB_POLL_ENABLED_TIME 1000
+
+struct labibb_regulator {
+ struct regulator_desc desc;
+ struct device *dev;
+ struct regmap *regmap;
+ struct regulator_dev *rdev;
+ u16 base;
+ u8 type;
+};
+
+struct labibb_regulator_data {
+ const char *name;
+ u8 type;
+ u16 base;
+ struct regulator_desc *desc;
+};
+
+static struct regulator_ops qcom_labibb_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static struct regulator_desc pmi8998_lab_desc = {
+ .enable_mask = LAB_ENABLE_CTL_MASK,
+ .enable_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_ENABLE_CTL),
+ .enable_val = LABIBB_CONTROL_ENABLE,
+ .enable_time = LAB_ENABLE_TIME,
+ .poll_enabled_time = LABIBB_POLL_ENABLED_TIME,
+ .off_on_delay = LABIBB_OFF_ON_DELAY,
+ .owner = THIS_MODULE,
+ .type = REGULATOR_VOLTAGE,
+ .ops = &qcom_labibb_ops,
+};
+
+static struct regulator_desc pmi8998_ibb_desc = {
+ .enable_mask = IBB_ENABLE_CTL_MASK,
+ .enable_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_ENABLE_CTL),
+ .enable_val = LABIBB_CONTROL_ENABLE,
+ .enable_time = IBB_ENABLE_TIME,
+ .poll_enabled_time = LABIBB_POLL_ENABLED_TIME,
+ .off_on_delay = LABIBB_OFF_ON_DELAY,
+ .owner = THIS_MODULE,
+ .type = REGULATOR_VOLTAGE,
+ .ops = &qcom_labibb_ops,
+};
+
+static const struct labibb_regulator_data pmi8998_labibb_data[] = {
+ {"lab", QCOM_LAB_TYPE, PMI8998_LAB_REG_BASE, &pmi8998_lab_desc},
+ {"ibb", QCOM_IBB_TYPE, PMI8998_IBB_REG_BASE, &pmi8998_ibb_desc},
+ { },
+};
+
+static const struct of_device_id qcom_labibb_match[] = {
+ { .compatible = "qcom,pmi8998-lab-ibb", .data = &pmi8998_labibb_data},
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_labibb_match);
+
+static int qcom_labibb_regulator_probe(struct platform_device *pdev)
+{
+ struct labibb_regulator *vreg;
+ struct device *dev = &pdev->dev;
+ struct regulator_config cfg = {};
+
+ const struct of_device_id *match;
+ const struct labibb_regulator_data *reg_data;
+ struct regmap *reg_regmap;
+ unsigned int type;
+ int ret;
+
+ reg_regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!reg_regmap) {
+ dev_err(&pdev->dev, "Couldn't get parent's regmap\n");
+ return -ENODEV;
+ }
+
+ match = of_match_device(qcom_labibb_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ for (reg_data = match->data; reg_data->name; reg_data++) {
+
+ /* Validate if the type of regulator is indeed
+ * what's mentioned in DT.
+ */
+ ret = regmap_read(reg_regmap, reg_data->base + REG_PERPH_TYPE,
+ &type);
+ if (ret < 0) {
+ dev_err(dev,
+ "Peripheral type read failed ret=%d\n",
+ ret);
+ return -EINVAL;
+ }
+
+ if (WARN_ON((type != QCOM_LAB_TYPE) && (type != QCOM_IBB_TYPE)) ||
+ WARN_ON(type != reg_data->type))
+ return -EINVAL;
+
+ vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg),
+ GFP_KERNEL);
+ if (!vreg)
+ return -ENOMEM;
+
+ vreg->regmap = reg_regmap;
+ vreg->dev = dev;
+ vreg->base = reg_data->base;
+ vreg->type = reg_data->type;
+
+ memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc));
+ vreg->desc.of_match = reg_data->name;
+ vreg->desc.name = reg_data->name;
+
+ cfg.dev = vreg->dev;
+ cfg.driver_data = vreg;
+ cfg.regmap = vreg->regmap;
+
+ vreg->rdev = devm_regulator_register(vreg->dev, &vreg->desc,
+ &cfg);
+
+ if (IS_ERR(vreg->rdev)) {
+ dev_err(dev, "qcom_labibb: error registering %s : %d\n",
+ reg_data->name, ret);
+ return PTR_ERR(vreg->rdev);
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver qcom_labibb_regulator_driver = {
+ .driver = {
+ .name = "qcom-lab-ibb-regulator",
+ .of_match_table = qcom_labibb_match,
+ },
+ .probe = qcom_labibb_regulator_probe,
+};
+module_platform_driver(qcom_labibb_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm labibb driver");
+MODULE_AUTHOR("Nisha Kumari <nishakumari@...eaurora.org>");
+MODULE_AUTHOR("Sumit Semwal <sumit.semwal@...aro.org>");
+MODULE_LICENSE("GPL v2");
--
2.27.0
Powered by blists - more mailing lists