Message-ID: <DM5PR11MB1435AA0A724D4A59B56E8CA8C3650@DM5PR11MB1435.namprd11.prod.outlook.com>
Date:   Fri, 10 Jul 2020 05:39:57 +0000
From:   "Liu, Yi L" <yi.l.liu@...el.com>
To:     Alex Williamson <alex.williamson@...hat.com>
CC:     "Tian, Kevin" <kevin.tian@...el.com>,
        "jacob.jun.pan@...ux.intel.com" <jacob.jun.pan@...ux.intel.com>,
        "eric.auger@...hat.com" <eric.auger@...hat.com>,
        "baolu.lu@...ux.intel.com" <baolu.lu@...ux.intel.com>,
        "joro@...tes.org" <joro@...tes.org>,
        "Raj, Ashok" <ashok.raj@...el.com>,
        "Tian, Jun J" <jun.j.tian@...el.com>,
        "Sun, Yi Y" <yi.y.sun@...el.com>,
        "jean-philippe@...aro.org" <jean-philippe@...aro.org>,
        "peterx@...hat.com" <peterx@...hat.com>,
        "Wu, Hao" <hao.wu@...el.com>,
        "iommu@...ts.linux-foundation.org" <iommu@...ts.linux-foundation.org>,
        "kvm@...r.kernel.org" <kvm@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v3 06/14] vfio/type1: Add VFIO_IOMMU_PASID_REQUEST
 (alloc/free)

Hi Alex, 

> From: Alex Williamson <alex.williamson@...hat.com>
> Sent: Thursday, July 9, 2020 10:28 PM
> 
> On Thu, 9 Jul 2020 07:16:31 +0000
> "Liu, Yi L" <yi.l.liu@...el.com> wrote:
> 
> > Hi Alex,
> >
> > After more thinking, looks like adding a r-b tree is still not enough to
> > solve the potential problem for free a range of PASID in one ioctl. If
> > caller gives [0, MAX_UNIT] in the free request, kernel anyhow should
> > loop all the PASIDs and search in the r-b tree. Even VFIO can track the
> > smallest/largest allocated PASID, and limit the free range to an accurate
> > range, it is still no efficient. For example, user has allocated two PASIDs
> > ( 1 and 999), and user gives the [0, MAX_UNIT] range in free request. VFIO
> > will limit the free range to be [1, 999], but still needs to loop PASID 1 -
> > 999, and search in r-b tree.
> 
> That sounds like a poor tree implementation.  Look at vfio_find_dma()
> for instance, it returns a node within the specified range.  If the
> tree has two nodes within the specified range we should never need to
> call a search function like vfio_find_dma() more than three times.  We
> call it once, get the first node, remove it.  Call it again, get the
> other node, remove it.  Call a third time, find no matches, we're done.
> So such an implementation limits searches to N+1 where N is the number
> of nodes within the range.

I see. When getting a free range from user. Use the range to find suited
PASIDs in the r-b tree. For the example I mentioned, if giving [0, MAX_UNIT],
will find two nodes. If giving [0, 100] range, then only one node will be
found. But even though, it still take some time if the user holds a bunch
of PASIDs and user gives a big free range.

> > So I'm wondering can we fall back to prior proposal which only free one
> > PASID for a free request. how about your opinion?
> 
> Doesn't it still seem like it would be a useful user interface to have
> a mechanism to free all pasids, by calling with exactly [0, MAX_UINT]?
> I'm not sure if there's another use case for this given than the user
> doesn't have strict control of the pasid values they get.  Thanks,

I don't have such use case neither. perhaps we may allow it in future by
adding flag. but if it's still useful, I may try with your suggestion. :-)

Regards,
Yi Liu

> Alex
> 
> > > From: Liu, Yi L <yi.l.liu@...el.com>
> > > Sent: Thursday, July 9, 2020 10:26 AM
> > >
> > > Hi Kevin,
> > >
> > > > From: Tian, Kevin <kevin.tian@...el.com>
> > > > Sent: Thursday, July 9, 2020 10:18 AM
> > > >
> > > > > From: Liu, Yi L <yi.l.liu@...el.com>
> > > > > Sent: Thursday, July 9, 2020 10:08 AM
> > > > >
> > > > > Hi Kevin,
> > > > >
> > > > > > From: Tian, Kevin <kevin.tian@...el.com>
> > > > > > Sent: Thursday, July 9, 2020 9:57 AM
> > > > > >
> > > > > > > From: Liu, Yi L <yi.l.liu@...el.com>
> > > > > > > Sent: Thursday, July 9, 2020 8:32 AM
> > > > > > >
> > > > > > > Hi Alex,
> > > > > > >
> > > > > > > > Alex Williamson <alex.williamson@...hat.com>
> > > > > > > > Sent: Thursday, July 9, 2020 3:55 AM
> > > > > > > >
> > > > > > > > On Wed, 8 Jul 2020 08:16:16 +0000 "Liu, Yi L"
> > > > > > > > <yi.l.liu@...el.com> wrote:
> > > > > > > >
> > > > > > > > > Hi Alex,
> > > > > > > > >
> > > > > > > > > > From: Liu, Yi L < yi.l.liu@...el.com>
> > > > > > > > > > Sent: Friday, July 3, 2020 2:28 PM
> > > > > > > > > >
> > > > > > > > > > Hi Alex,
> > > > > > > > > >
> > > > > > > > > > > From: Alex Williamson <alex.williamson@...hat.com>
> > > > > > > > > > > Sent: Friday, July 3, 2020 5:19 AM
> > > > > > > > > > >
> > > > > > > > > > > On Wed, 24 Jun 2020 01:55:19 -0700 Liu Yi L
> > > > > > > > > > > <yi.l.liu@...el.com> wrote:
> > > > > > > > > > >
> > > > > > > > > > > > This patch allows user space to request PASID
> > > > > > > > > > > > allocation/free,
> > > > > e.g.
> > > > > > > > > > > > when serving the request from the guest.
> > > > > > > > > > > >
> > > > > > > > > > > > PASIDs that are not freed by userspace are
> > > > > > > > > > > > automatically freed
> > > > > > > when
> > > > > > > > > > > > the IOASID set is destroyed when process exits.
> > > > > > > > > [...]
> > > > > > > > > > > > +static int vfio_iommu_type1_pasid_request(struct
> > > > > > > > > > > > +vfio_iommu
> > > > > > > *iommu,
> > > > > > > > > > > > +					  unsigned long arg) {
> > > > > > > > > > > > +	struct vfio_iommu_type1_pasid_request req;
> > > > > > > > > > > > +	unsigned long minsz;
> > > > > > > > > > > > +
> > > > > > > > > > > > +	minsz = offsetofend(struct
> > > > vfio_iommu_type1_pasid_request,
> > > > > > > > range);
> > > > > > > > > > > > +
> > > > > > > > > > > > +	if (copy_from_user(&req, (void __user *)arg, minsz))
> > > > > > > > > > > > +		return -EFAULT;
> > > > > > > > > > > > +
> > > > > > > > > > > > +	if (req.argsz < minsz || (req.flags &
> > > > > > > > ~VFIO_PASID_REQUEST_MASK))
> > > > > > > > > > > > +		return -EINVAL;
> > > > > > > > > > > > +
> > > > > > > > > > > > +	if (req.range.min > req.range.max)
> > > > > > > > > > >
> > > > > > > > > > > Is it exploitable that a user can spin the kernel for a
> > > > > > > > > > > long time in the case of a free by calling this with [0,
> > > > > > > > > > > MAX_UINT] regardless of their
> > > > > > > > actual
> > > > > > > > > > allocations?
> > > > > > > > > >
> > > > > > > > > > IOASID can ensure that user can only free the PASIDs
> > > > > > > > > > allocated to the
> > > > > > > user.
> > > > > > > > but
> > > > > > > > > > it's true, kernel needs to loop all the PASIDs within the
> > > > > > > > > > range provided by user.
> > > > > > > > it
> > > > > > > > > > may take a long time. is there anything we can do? one
> > > > > > > > > > thing may limit
> > > > > > > the
> > > > > > > > range
> > > > > > > > > > provided by user?
> > > > > > > > >
> > > > > > > > > thought about it more, we have per-VM pasid quota (say
> > > > > > > > > 1000), so even if user passed down [0, MAX_UNIT], kernel
> > > > > > > > > will only loop the
> > > > > > > > > 1000 pasids at most. do you think we still need to do something on
> it?
> > > > > > > >
> > > > > > > > How do you figure that?  vfio_iommu_type1_pasid_request()
> > > > > > > > accepts the user's min/max so long as (max > min) and passes
> > > > > > > > that to vfio_iommu_type1_pasid_free(), then to
> > > > > > > > vfio_pasid_free_range() which loops as:
> > > > > > > >
> > > > > > > > 	ioasid_t pasid = min;
> > > > > > > > 	for (; pasid <= max; pasid++)
> > > > > > > > 		ioasid_free(pasid);
> > > > > > > >
> > > > > > > > A user might only be able to allocate 1000 pasids, but
> > > > > > > > apparently they can ask to free all they want.
> > > > > > > >
> > > > > > > > It's also not obvious to me that calling ioasid_free() is only
> > > > > > > > allowing the user to free their own passid.  Does it?  It
> > > > > > > > would be a pretty
> > > > > >
> > > > > > Agree. I thought ioasid_free should at least carry a token since
> > > > > > the user
> > > > > space is
> > > > > > only allowed to manage PASIDs in its own set...
> > > > > >
> > > > > > > > gaping hole if a user could free arbitrary pasids.  A r-b tree
> > > > > > > > of passids might help both for security and to bound spinning in a
> loop.
> > > > > > >
> > > > > > > oh, yes. BTW. instead of r-b tree in VFIO, maybe we can add an
> > > > > > > ioasid_set parameter for ioasid_free(), thus to prevent the user
> > > > > > > from freeing PASIDs that doesn't belong to it. I remember Jacob
> > > > > > > mentioned it
> > > > > before.
> > > > > > >
> > > > > >
> > > > > > check current ioasid_free:
> > > > > >
> > > > > >         spin_lock(&ioasid_allocator_lock);
> > > > > >         ioasid_data = xa_load(&active_allocator->xa, ioasid);
> > > > > >         if (!ioasid_data) {
> > > > > >                 pr_err("Trying to free unknown IOASID %u\n", ioasid);
> > > > > >                 goto exit_unlock;
> > > > > >         }
> > > > > >
> > > > > > Allow an user to trigger above lock paths with MAX_UINT times
> > > > > > might still
> > > > > be bad.
> > > > >
> > > > > yeah, how about the below two options:
> > > > >
> > > > > - comparing the max - min with the quota before calling ioasid_free().
> > > > >   If max - min > current quota of the user, then should fail it. If
> > > > >   max - min < quota, then call ioasid_free() one by one. still trigger
> > > > >   the above lock path with quota times.
> > > >
> > > > This is definitely wrong. [min, max] is about the range of the PASID
> > > > value, while quota is about the number of allocated PASIDs. It's a bit
> > > > weird to mix two together.
> > >
> > > got it.
> > >
> > > > btw what is the main purpose of allowing batch PASID free requests?
> > > > Can we just simplify to allow one PASID in each free just like how is
> > > > it done in allocation path?
> > >
> > > it's an intention to reuse the [min, max] range as allocation path. currently,
> we
> > > don't have such request as far as I can see.
> > >
> > > > >
> > > > > - pass the max and min to ioasid_free(), let ioasid_free() decide. should
> > > > >   be able to avoid trigger the lock multiple times, and ioasid has have a
> > > > >   track on how may PASIDs have been allocated, if max - min is larger than
> > > > >   the allocated number, should fail anyway.
> > > >
> > > > What about Alex's r-b tree suggestion? Is there any downside in you mind?
> > >
> > > no downside, I was just wanting to reuse the tracks in ioasid_set. I can add a
> r-b
> > > for allocated PASIDs and find the PASIDs in the r-b tree only do free for the
> > > PASIDs found in r-b tree, others in the range would be ignored.
> > > does it look good?
> > >
> > > Regards,
> > > Yi Liu
> > >
> > > > Thanks,
> > > > Kevin
> >

Powered by blists - more mailing lists