| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1594375137.4941.5.camel@mtksdccf07>
Date: Fri, 10 Jul 2020 17:58:57 +0800
From: mtk17045 <henry.yen@...iatek.com>
To: Daniel Lezcano <daniel.lezcano@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Amit Kucheria <amit.kucheria@...durent.com>,
". Zhang Rui" <rui.zhang@...el.com>
CC: <linux-pm@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
"Steven Liu" <steven.liu@...iatek.com>,
Michael Kao <michael.kao@...iatek.com>,
Henry Yen <henry.yen@...iatek.com>
Subject: Re: [PATCH v2 1/2] thermal: mediatek: prepare to add support for
other platforms
On Thu, 2020-04-30 at 17:14 +0800, Henry Yen wrote:
> It is known that Mediatek owns two thermal systems, which only differ
> in the way of reading calibration data and converting temperature.
> MT8173, MT8183, MT2701 and MT2712 belongs to version 1 thermal
> system, and MT7622 belongs to version 2.
>
> In order to handle both systems, the suffix _V1 is appended to the
> current code, and then the second patch will add _V2 functions with
> the same purpose but different implementation.
>
> Signed-off-by: Henry Yen <henry.yen@...iatek.com>
> ---
> drivers/thermal/mtk_thermal.c | 114 ++++++++++++++++++----------------
> 1 file changed, 62 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index 76e30603d4d5..10107d9d56a8 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -120,18 +120,18 @@
> * MT2701 has 3 sensors and needs 3 VTS calibration data.
> * MT2712 has 4 sensors and needs 4 VTS calibration data.
> */
> -#define CALIB_BUF0_VALID BIT(0)
> -#define CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff)
> -#define CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff)
> -#define CALIB_BUF0_VTS_TS2(x) (((x) >> 8) & 0x1ff)
> -#define CALIB_BUF1_VTS_TS3(x) (((x) >> 0) & 0x1ff)
> -#define CALIB_BUF2_VTS_TS4(x) (((x) >> 23) & 0x1ff)
> -#define CALIB_BUF2_VTS_TS5(x) (((x) >> 5) & 0x1ff)
> -#define CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff)
> -#define CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f)
> -#define CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f)
> -#define CALIB_BUF0_O_SLOPE_SIGN(x) (((x) >> 7) & 0x1)
> -#define CALIB_BUF1_ID(x) (((x) >> 9) & 0x1)
> +#define CALIB_BUF0_VALID_V1 BIT(0)
> +#define CALIB_BUF1_ADC_GE_V1(x) (((x) >> 22) & 0x3ff)
> +#define CALIB_BUF0_VTS_TS1_V1(x) (((x) >> 17) & 0x1ff)
> +#define CALIB_BUF0_VTS_TS2_V1(x) (((x) >> 8) & 0x1ff)
> +#define CALIB_BUF1_VTS_TS3_V1(x) (((x) >> 0) & 0x1ff)
> +#define CALIB_BUF2_VTS_TS4_V1(x) (((x) >> 23) & 0x1ff)
> +#define CALIB_BUF2_VTS_TS5_V1(x) (((x) >> 5) & 0x1ff)
> +#define CALIB_BUF2_VTS_TSABB_V1(x) (((x) >> 14) & 0x1ff)
> +#define CALIB_BUF0_DEGC_CALI_V1(x) (((x) >> 1) & 0x3f)
> +#define CALIB_BUF0_O_SLOPE_V1(x) (((x) >> 26) & 0x3f)
> +#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1)
> +#define CALIB_BUF1_ID_V1(x) (((x) >> 9) & 0x1)
>
> enum {
> VTS1,
> @@ -525,7 +525,7 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
> * This converts the raw ADC value to mcelsius using the SoC specific
> * calibration constants
> */
> -static int raw_to_mcelsius(struct mtk_thermal *mt, int sensno, s32 raw)
> +static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
> {
> s32 tmp;
>
> @@ -594,9 +594,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
> raw = readl(mt->thermal_base +
> conf->msr[conf->bank_data[bank->id].sensors[i]]);
>
> - temp = raw_to_mcelsius(mt,
> - conf->bank_data[bank->id].sensors[i],
> - raw);
> + temp = raw_to_mcelsius_v1(mt,
> + conf->bank_data[bank->id].sensors[i],
> + raw);
>
> /*
> * The first read of a sensor often contains very high bogus
> @@ -758,6 +758,51 @@ static u64 of_get_phys_base(struct device_node *np)
> return of_translate_address(np, regaddr_p);
> }
>
> +static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
> +{
> + int i;
> +
> + if (!(buf[0] & CALIB_BUF0_VALID_V1))
> + return -EINVAL;
> +
> + mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]);
> +
> + for (i = 0; i < mt->conf->num_sensors; i++) {
> + switch (mt->conf->vts_index[i]) {
> + case VTS1:
> + mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]);
> + break;
> + case VTS2:
> + mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]);
> + break;
> + case VTS3:
> + mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]);
> + break;
> + case VTS4:
> + mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]);
> + break;
> + case VTS5:
> + mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]);
> + break;
> + case VTSABB:
> + mt->vts[VTSABB] =
> + CALIB_BUF2_VTS_TSABB_V1(buf[2]);
> + break;
> + default:
> + break;
> + }
> + }
> +
> + mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]);
> + if (CALIB_BUF1_ID_V1(buf[1]) &
> + CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0]))
> + mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]);
> + else
> + mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]);
> +
> + return 0;
> +}
> +
> static int mtk_thermal_get_calibration_data(struct device *dev,
> struct mtk_thermal *mt)
> {
> @@ -793,43 +838,8 @@ static int mtk_thermal_get_calibration_data(struct device *dev,
> goto out;
> }
>
> - if (buf[0] & CALIB_BUF0_VALID) {
> - mt->adc_ge = CALIB_BUF1_ADC_GE(buf[1]);
> -
> - for (i = 0; i < mt->conf->num_sensors; i++) {
> - switch (mt->conf->vts_index[i]) {
> - case VTS1:
> - mt->vts[VTS1] = CALIB_BUF0_VTS_TS1(buf[0]);
> - break;
> - case VTS2:
> - mt->vts[VTS2] = CALIB_BUF0_VTS_TS2(buf[0]);
> - break;
> - case VTS3:
> - mt->vts[VTS3] = CALIB_BUF1_VTS_TS3(buf[1]);
> - break;
> - case VTS4:
> - mt->vts[VTS4] = CALIB_BUF2_VTS_TS4(buf[2]);
> - break;
> - case VTS5:
> - mt->vts[VTS5] = CALIB_BUF2_VTS_TS5(buf[2]);
> - break;
> - case VTSABB:
> - mt->vts[VTSABB] = CALIB_BUF2_VTS_TSABB(buf[2]);
> - break;
> - default:
> - break;
> - }
> - }
> -
> - mt->degc_cali = CALIB_BUF0_DEGC_CALI(buf[0]);
> - if (CALIB_BUF1_ID(buf[1]) &
> - CALIB_BUF0_O_SLOPE_SIGN(buf[0]))
> - mt->o_slope = -CALIB_BUF0_O_SLOPE(buf[0]);
> - else
> - mt->o_slope = CALIB_BUF0_O_SLOPE(buf[0]);
> - } else {
> + if (mtk_thermal_extract_efuse_v1(mt, buf))
> dev_info(dev, "Device not calibrated, using default calibration values\n");
> - }
>
> out:
> kfree(buf);
Just gently ping.
Many thanks.
Powered by blists - more mailing lists