lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200711185421.GS1014141@lunn.ch>
Date:   Sat, 11 Jul 2020 20:54:21 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Dan Murphy <dmurphy@...com>
Cc:     f.fainelli@...il.com, hkallweit1@...il.com, davem@...emloft.net,
        robh@...nel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH net-next v2 2/2] net: phy: DP83822: Add ability to
 advertise Fiber connection

> @@ -302,6 +357,48 @@ static int dp83822_config_init(struct phy_device *phydev)
>  		}
>  	}
>  
> +	if (dp83822->fx_enabled) {
> +		err = phy_modify(phydev, MII_DP83822_CTRL_2,
> +				 DP83822_FX_ENABLE, 1);
> +		if (err < 0)
> +			return err;
> +
> +		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
> +				 phydev->supported);
> +		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
> +				 phydev->advertising);
> +
> +		/* Auto neg is not supported in fiber mode */
> +		bmcr = phy_read(phydev, MII_BMCR);
> +		if (bmcr < 0)
> +			return bmcr;
> +
> +		if (bmcr & BMCR_ANENABLE) {
> +			err =  phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
> +			if (err < 0)
> +				return err;
> +		}
> +		phydev->autoneg = AUTONEG_DISABLE;

You should also be removing ETHTOOL_LINK_MODE_Autoneg_BIT from
phydev->supported, to make it clear autoneg is not supported. Assuming
genphy_read_abilities() cannot figure this out for itself.

			Andrew

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ